Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Massey Ferguson 4707 tractor parts & technical data

Here are more than 50 parts for the Massey Ferguson 4707, among them trailer couplings, three-point linkage parts and electrics for this 4700 series model.

46 parts found for Massey Ferguson 4707
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Knorr Bremse Antifreeze pump air pressure- / brake system, 684 g
€280,12 €231,50 €257,71 €212,98
You save 8%
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN): 97,1 | Lock: ball 80 | Load capacity (kg): 3000 | Description: Daiml... More
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-...
€3.397,30 €2.807,69 €3.175,52 €2.624,40
You save 7%
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Length (mm): 60 | Thread: M18 X 1,5 More
Length (mm): 60 | Thread: M18 X 1,5
€16,23 €13,41
Walterscheid Inner part ball 80 rail width 311 mm, pin Ø 22 mm, 3000 kg
Walterscheid
Description: This product is a ball support with two locking bolts. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (E... More
Description: This product is a ball support with two locking bolts. Th...
€2.222,24 €1.836,56 €1.756,92 €1.452,00
You save 21%
Walterscheid Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
Walterscheid
Hole pattern (mm): 140 x 80 | Colour: Black | D-value (kN): 89,3 | Guide width (mm): 30 | Hole (mm): M20 | Assembly notes: The vehicle part support di... More
Hole pattern (mm): 140 x 80 | Colour: Black | D-value (kN): 89,3 | Gui...
€785,67 €649,31 €621,15 €513,35
You save 21%
Scharmüller Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Scharmüller
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour: Schwarz | Guide width (mm): 32 | D-value (kN): 112 | Dc-value (kN): 106 | V-val... More
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour:...
€1.336,47 €1.104,52 €1.279,55 €1.057,48
You save 4%
Scharmüller Drawbar frame standard 89,3 kN, 330 mm, type 437
Scharmüller
D-value (kN): 89,3 | Rail width (mm): 330 | Load capacity (kg): 2500 | Version: Standard | Colour: Black | Guide width (mm): 32 | Type: 437 | Category... More
D-value (kN): 89,3 | Rail width (mm): 330 | Load capacity (kg): 2500 |...
€2.322,25 €1.919,21 €2.186,47 €1.807,00
You save 6%
Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, 175 ccm oil
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Reference no.: QP7H15-8244 | Oil quantity (ccm): 175 | Fixing: DM | No. of grooves: 6 | Refrigerant: ... More
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Reference no.: QP7H15...
€480,86 €397,41 €442,39 €365,61
You save 8%
Walterscheid Piton Fix rail width 311 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.832,08 €1.514,12 €1.448,46 €1.197,08
You save 21%
MAHLE Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PAD Massey Ferguson
MAHLE
Refrigerant: R 134a | Reference no.: ACP 1047 000S | Pulley Ø (mm): 119 | Suitable oil: PAG 46 | No. of grooves: 6 | Connection: PAD | Nominal voltag... More
Refrigerant: R 134a | Reference no.: ACP 1047 000S | Pulley Ø (mm): 1...
€667,26 €551,45 €399,65 €330,29
You save 40%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
SANDEN Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PV6 Massey Ferguson
SANDEN
Pulley Ø (mm): 119 | Nominal voltage (V): 12 | Reference no.: 8244 | For compressor: SD7H15 | No. of grooves: 6 | Fixing: DM | Connection: PV6 | Refr... More
Pulley Ø (mm): 119 | Nominal voltage (V): 12 | Reference no.: 8244 | ...
€654,37 €540,80 €602,02 €497,54
You save 8%
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32,5 mm
€549,27 €453,94 €328,98 €271,89
You save 40%
MAHLE Alternator 14 V, 120 A, pulley Ø 60 mm, Poly pulley 6 ribs
MAHLE
Version: With V-ribbed belt pulley (6 ribs) | Mounting hole Ø / R (mm): 10,2 | Pulley Ø (mm): 60 | Nominal voltage (V): 14 | Mounting L / d / R (mm)... More
Version: With V-ribbed belt pulley (6 ribs) | Mounting hole Ø / R (mm...
€518,87 €428,82 €310,77 €256,84
You save 40%
Rail pressure valve Massey Ferguson, Valtra-Valmet, Fendt
€69,94 €57,80 €64,34 €53,18
You save 8%
Reman turbocharger Massey Ferguson 3615-4709, Valtra-Valmet A 72-93
€905,52 €748,36 €867,78 €717,18
You save 4%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Mirror unheated 263 x 160 mm, rod Ø 10 - 22 mm Massey Ferguson
Tractor type: Massey Ferguson 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4315, 4320, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5425, 5435, 5445, ... More
Tractor type: Massey Ferguson 4225, 4235, 4240, 4245, 4255, 4260, 4265...
€50,40 €41,65 €46,37 €38,32
You save 8%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
You save 8%
Hydraulic top link cat. 2/2, 620 - 931 mm, stroke 311 mm, Ø 63 mm
Top link type: hydraulic. Type: Ball joint/ball joint. A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 931 mm. Stroke: 311 mm. Piston rod Ø D: 35 mm. Cy... More
Top link type: hydraulic. Type: Ball joint/ball joint. A cat.: 2 / 25,...
€486,06 €401,70 €447,18 €369,57
You save 8%
Mirror 263 x 160 mm, unheated, manual, rod-Ø 10 - 24 mm
Dimensions: 263 x 160 mm. Height: 263 mm. Width: 160 mm. Version: Left or right control. Installation location: Right/left. Notes: Manual operation. A... More
Dimensions: 263 x 160 mm. Height: 263 mm. Width: 160 mm. Version: Left...
€36,00 €29,75 €33,12 €27,37
You save 8%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€48,90 €40,41 €44,99 €37,18
You save 8%
Walterscheid Ball hitch K80 311 / 22 / 30 mm, 84,3 kN
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 84.3 kN. Colour: black. Description: This product is a ball hitch. The hitch ba... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value:...
€2.082,09 €1.720,74 €1.646,11 €1.360,43
You save 21%
Gas strut rear window 150 N, 485 mm, stroke 200 mm Massey Ferguson
Newtons: 150. A: 485 mm. Stroke: 200 mm. d1: 8 mm. d2: 19 mm. To fit: Rear window. Form: 6. More
Newtons: 150. A: 485 mm. Stroke: 200 mm. d1: 8 mm. d2: 19 mm. To fit: ...
€64,77 €53,53 €59,59 €49,25
You save 8%
Walterscheid Ball insert system 80, shank 60 x 60 mm, working length 203 mm
Walterscheid
Shaft cross section W x H: 60 x 60 mm. Overhang: 203 mm. Hole spacing: 115 mm. Hole: 22,5 mm. Colour: Yellow. Description: The model has an integrated... More
Shaft cross section W x H: 60 x 60 mm. Overhang: 203 mm. Hole spacing:...
€2.404,06 €1.986,83 €1.900,67 €1.570,80
You save 21%
Filler cap for expansion tank
Version: For expansion tank. More
Version: For expansion tank.
€51,57 €42,62 €47,44 €39,21
You save 8%
Hydraulic top link cat. 2, 620 - 881 mm, stroke 261 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: 35 mm. Cylinder Ø inner E: 70 mm. Check valve: Top. Lifting force: 6 t. Tensile... More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: ...
€610,61 €504,64 €561,76 €464,27
You save 8%
Pivot fender left Massey Ferguson 5460-8732
€459,22 €379,52 €422,48 €349,16
You save 8%
Spring right fender Fendt, Massey Ferguson
Version: Suitable for Fendt pivoting mudguards. More
Version: Suitable for Fendt pivoting mudguards.
€37,99 €31,39
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,96 €33,03
Water pump Massey Ferguson 4607-5713, Valtra-Valmet A 74 - A 134
€593,64 €490,61 €546,15 €451,36
You save 8%
Cover fender
€18,94 €15,65
Pivot right Massey Ferguson 5460-8732
€459,22 €379,52 €422,48 €349,16
You save 8%
Walterscheid Top drawbar rail 311 mm, pin Ø 22 mm, coupling pin 38 mm
Walterscheid
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 88,5 kN. Colour: Black. Descript... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€2.305,12 €1.905,06 €1.822,44 €1.506,15
You save 21%
Mirror 260 x 180 mm, unheated, rod Ø 10 mm
Dimensions: 260 x 180 mm. Rod Ø: 10 mm. More
Dimensions: 260 x 180 mm. Rod Ø: 10 mm.
€57,49 €47,51 €52,89 €43,71
You save 8%

Massey Ferguson 4707 parts for road work, hitch and cooling

Taking a Massey Ferguson 4707 on the road means you want clear mirrors, a working beacon and a trailer that brakes properly. This page lists more than 50 parts for the 4707, from mirrors and air brake coupling heads to thermostats and aircon compressors. Brands include Walterscheid, GRANIT, MAHLE, Scharmüller and SANDEN.

Mirrors come in several versions for the 4707. A mirror that shakes is often loose on its rod clamp rather than in the glass, so check the mounting before ordering a new one. There is also a beacon for road travel. If you pull equipment with air brakes, you will find coupling heads for the supply line here. Keep the dust caps closed whenever nothing is hooked up, so dirt does not settle in the seal.

Hitch and top link

At the back it comes down to the drawbar frame, top drawbar, ball hitch and a ball insert, based on Scharmüller and Walterscheid systems. There is also a hydraulic top link. If it slowly creeps in, check the hoses and couplings before you start on the cylinder itself.

Cooling, air con and fenders

For the engine there are thermostats and a water pump seal. A pump that drips from its weep hole is an early sign the seal has had it. The cab is covered by aircon compressors, including SANDEN, and a gas strut. The fenders hang on pivots with a spring, and a tank cap is on the page as well.

A new aircon compressor needs the right oil in the right quantity. If the system has been open for a long time, have it evacuated before charging so no moisture stays behind. The gas strut holds the window or door open and slowly loses pressure over the years, so a window that sinks back halfway is a clear sign it is due. With the fender springs and pivots, check the mounting bolts as well, since a loose fender can touch the tyre on full lock. The tank cap keeps dirt out of the fuel, so replace it once its seal has cracked.

Type plate and reference number

From the outside the 4707 looks much like its siblings in the 4700 series, so the type plate settles it. With an aircon compressor or thermostat, then compare the number on the old part with the reference number shown for the product, and with fender parts check left or right.

From the same series, the Massey Ferguson 4708 and the Massey Ferguson 4709 also have their own pages, each showing what fits that model. For a different Massey Ferguson, start from Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart