Menu
EUR

Massey Ferguson 8S.245 tractor parts & technical data

Parts for the Massey Ferguson 8S.245 are gathered here: more than 40 items for the 8S series, from trailer couplings to three-point linkage parts and electrics.

45 parts found for Massey Ferguson 8S.245
Show:
Scharmüller Support plates ball 80, 965 x 270 mm, thickness 50 mm, 97,1 kN
Scharmüller
Thickness (mm): 50 | Load capacity (t): 3 | Number of heart pins: 1 | Lock: ball 80 | Colour: AGCO grey | Category: Support plates | Version: Standard... More
Thickness (mm): 50 | Load capacity (t): 3 | Number of heart pins: 1 | ...
€1.950,35 €1.611,86
Walterscheid Drawbar support rail 390 mm, 92 kN, nose weight 3500 kg, Fendt gray
Walterscheid
H (mm): 52 | F (mm): 260 | C (mm): 25 | G (mm): 232 | Description: The drawbar supports are height-adjustable sliding plates that can only be operated... More
H (mm): 52 | F (mm): 260 | C (mm): 25 | G (mm): 232 | Description: The...
€2.403,79 €1.986,60 €1.888,65 €1.560,87
You save 21%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.792,68 €1.481,55 €1.408,50 €1.164,05
You save 21%
Scharmüller Drawbar pin-Ø 31,5 mm, 1003 mm, category 2, AGCO gray
Scharmüller
Load capacity (kg): 2200 | Width (mm): 80 | Pin Ø (mm): 31,5 | Mounting position: 2 | Version: Standard | Lock: Pin | D-value (kN): 89,3 | Colour: AG... More
Load capacity (kg): 2200 | Width (mm): 80 | Pin Ø (mm): 31,5 | Mounti...
€439,20 €362,98
GRANIT Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
GRANIT
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,30 €31,65
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.291,98 €1.894,20 €1.800,80 €1.488,26
You save 21%
DANA Spicer Shaft seal final drive front axle 755, 356 g
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€90,28 €74,61 €81,65 €67,48
You save 10%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.158,06 €957,07 €909,90 €751,98
You save 21%
HELLA Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, clockwise
€371,08 €306,68 €298,35 €246,57
You save 20%
GRANIT NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€837,84 €692,43 €795,90 €657,77
You save 5%
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Ø: 54 mm. Temperature: 80 °C. More
Ø: 54 mm. Temperature: 80 °C.
€25,00 €20,66
HELLA Headlight left / right 12 V, H7, built-in, glass Ø 90 mm Fendt
HELLA
Bulb: 12V55W / H7. Dimensions: 108 x 181.7 mm. Connection: AMP. Form: Round. Height: 108 mm. Material: Diffusing lens: glass. Depth: 181,7 mm. Install... More
Bulb: 12V55W / H7. Dimensions: 108 x 181.7 mm. Connection: AMP. Form: ...
€152,01 €125,63
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.169,53 €1.793,00 €1.789,85 €1.479,21
You save 18%
Hydraulische Hubstrebe clevis / clevis, 800 mm, Ø 120 mm
To fit: Massey Ferguson, Valmet & Valtra | D (mm): 120 | Type: Gabelgelenk / Gabelgelenk | L (mm): 800 | C (mm): 45 | A (mm): 32 More
To fit: Massey Ferguson, Valmet & Valtra | D (mm): 120 | Type: Gabelge...
€1.074,94 €888,38 €1.021,15 €843,93
You save 5%
GRANIT Hydraulische Hubstrebe clevis / ball joint, 670 mm, Ø 92 mm
GRANIT
Type: Gabelgelenk / Kugelgelenk | S1 (mm): 37 | To fit: Massey Ferguson, Valmet & Valtra, John Deere | B (mm): 28 | D (mm): 92 | C (mm): 40 | L (mm): ... More
Type: Gabelgelenk / Kugelgelenk | S1 (mm): 37 | To fit: Massey Ferguso...
€778,94 €643,75 €739,95 €611,53
You save 5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Temperature sensor exhaust aftertreatment
€223,56 €184,76 €212,35 €175,50
You save 5%
GRANIT Hydraulische Hubstrebe clevis / clevis, 800 mm, Ø 102 mm
GRANIT
To fit: Massey Ferguson | S1 (mm): 37,5 | C (mm): 45 | Type: Gabelgelenk / Gabelgelenk | D (mm): 102 | L (mm): 800 | A (mm): 28 More
To fit: Massey Ferguson | S1 (mm): 37,5 | C (mm): 45 | Type: Gabelgele...
€981,47 €811,13 €932,35 €770,54
You save 5%
Scharmüller Drawbar retrofit kit 80 x 50 mm, 89,3 kN, 2200 kg, cat. 2, AGCO gray
Scharmüller
Mounting position: 2 | Colour: AGCO grey | Width (mm): 80 | Load capacity (kg): 2200 | Version: Retrofit kits | D-value (kN): 89,3 | Height (mm): 50 |... More
Mounting position: 2 | Colour: AGCO grey | Width (mm): 80 | Load capac...
€597,55 €493,84
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 244 mm, Ø 89 mm
€468,19 €386,93 €292,60 €241,82
You save 38%
Brake disc outer-Ø 250 mm, inner-Ø 71 mm, thickness 4,9 mm
Inner Ø (mm): 71 | Outer Ø (mm): 250 | Thickness (mm): 4,9 More
Inner Ø (mm): 71 | Outer Ø (mm): 250 | Thickness (mm): 4,9
€100,89 €83,38 €95,80 €79,17
You save 5%
Scharmüller Drawbar frame standard Piton fix, 97,1 kN, 3000 kg, rail 390 mm
Scharmüller
Rail width (mm): 390 | Lock: Piton Fix manual | Guide width (mm): 32 | Colour: AGCO grey | D-value (kN): 97,1 | Category: Bearing supports | Version: ... More
Rail width (mm): 390 | Lock: Piton Fix manual | Guide width (mm): 32 |...
€1.504,56 €1.243,44
Scharmüller Drawbar frame standard ball 80, 104 kN, 4000 kg, rail 390 mm
Scharmüller
Detent pin Ø (mm): 25 | Colour: AGCO grey | Lock: Ball 80 manual | Rail width (mm): 390 | Category: Bearing supports | Version: Standard | D-value (k... More
Detent pin Ø (mm): 25 | Colour: AGCO grey | Lock: Ball 80 manual | Ra...
€2.240,25 €1.851,45
Showing 1 - 24 of 45

Massey Ferguson 8S.245 parts for linkage, hitching and engine

This page brings together more than 40 replacement parts for the Massey Ferguson 8S.245, from GRANIT, Walterscheid, Scharmüller, HELLA and MAHLE. They cover the jobs this tractor does every day: lifting on the three-point linkage, towing heavy trailers and keeping the engine at temperature.

On the linkage and at the hitch

  • Hydraulic top links and a hydraulic stabilizer for the rear linkage
  • A drawbar with ball, a drawbar frame, Piton Fix and an adapter plate
  • Drawbar retrofit kits
  • Connector heads for the supply line of air braked trailers

For a hydraulic top link, check the category of the ball ends and the closed and extended lengths on the old one before you choose a replacement.

Engine, cab and lighting

Thermostats and starter motors cover the engine side. Around the cab there are rear shock absorbers for the cab suspension, a mirror and a screenwash pump, while a headlight and a beacon take care of lighting.

A word on thermostats. An engine that never warms up properly in winter usually has a thermostat stuck open, and one that heats up quickly may have it stuck shut. Always fit a new seal, clean the mating face and bleed the cooling system fully after refilling. You can test a thermostat in a pan of hot water, it should open visibly well before the water boils.

On the air connector heads, look at the rubber seal inside the coupling. A cracked or flattened seal leaks air and can leave the trailer brakes dragging. Close the dust cover after uncoupling to keep dirt out.

If the starter turns slowly or only clicks, check the battery, the terminals and the main cable to the starter first. Only when those are in order is the starter itself the suspect. A replacement should match the old unit's pinion tooth count and turn the same way. For the cab, worn suspension shock absorbers show up as hard knocks over rough tracks or a cab that keeps rocking, and they are best replaced as a pair.

Finding the right match

For engine parts, the type plate with model and serial number settles most doubts, and old starters and thermostats generally carry a reference number you can compare with the part on this page.

The 8S.245 sits in the Massey Ferguson 8S series. Its sister models have their own pages, useful if you run a mixed fleet:

Older series from the brand are listed under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart