Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Massey Ferguson 5710 tractor parts & technical data

A selection of more than 60 parts for the Massey Ferguson 5710 in the 5700 series, including trailer couplings, electrics, and steering and front axle parts.

54 parts found for Massey Ferguson 5710
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Knorr Bremse Antifreeze pump air pressure- / brake system, 684 g
€280,12 €231,50 €257,71 €212,98
You save 8%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€936,88 €774,28 €740,70 €612,15
You save 21%
NOX sensor Massey Ferguson, Valtra-Valmet, Fendt
To fit: Massey Ferguson, Valtra-Valmet, Fendt. More
To fit: Massey Ferguson, Valtra-Valmet, Fendt.
€453,61 €374,88 €417,32 €344,89
You save 8%
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN): 97,1 | Lock: ball 80 | Load capacity (kg): 3000 | Description: Daiml... More
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-...
€3.397,30 €2.807,69 €3.175,52 €2.624,40
You save 7%
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Length (mm): 60 | Thread: M18 X 1,5 More
Length (mm): 60 | Thread: M18 X 1,5
€16,23 €13,41
Scharmüller Support plate Piton Fix manual, 445 x 220 x 40 mm, 3 ton, AGCO gray
Scharmüller
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual | Version: Standard | Colour: AGCO grey | Load capacity (t): 3 | Length (mm): 4... More
D-value (kN): 71,9 | Category: Support plates | Lock: Piton Fix manual...
€987,09 €815,78 €908,12 €750,51
You save 8%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Scharmüller Drawbar frame standard 76,4 kN, 330 mm, type 427, axle tube Ø 120 mm
Scharmüller
Category: Bearing supports | Colour: Black | Description: compatible with Q37 Daimler end cross member or Scharmüller item 34.437.001.0 Suitable for ... More
Category: Bearing supports | Colour: Black | Description: compatible w...
€5.236,22 €4.327,45 €4.867,32 €4.022,58
You save 7%
Scharmüller Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Scharmüller
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour: Schwarz | Guide width (mm): 32 | D-value (kN): 112 | Dc-value (kN): 106 | V-val... More
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour:...
€1.336,47 €1.104,52 €1.279,55 €1.057,48
You save 4%
Scharmüller Drawbar frame standard 89,3 kN, 330 mm, type 437
Scharmüller
D-value (kN): 89,3 | Rail width (mm): 330 | Load capacity (kg): 2500 | Version: Standard | Colour: Black | Guide width (mm): 32 | Type: 437 | Category... More
D-value (kN): 89,3 | Rail width (mm): 330 | Load capacity (kg): 2500 |...
€2.322,25 €1.919,21 €2.186,47 €1.807,00
You save 6%
Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, 175 ccm oil
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Reference no.: QP7H15-8244 | Oil quantity (ccm): 175 | Fixing: DM | No. of grooves: 6 | Refrigerant: ... More
Nominal voltage (V): 12 | Suitable oil: PAG 46 | Reference no.: QP7H15...
€480,86 €397,41 €442,39 €365,61
You save 8%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.167,94 €965,24 €923,38 €763,13
You save 21%
Scharmüller Drawbar frame standard 76,4 kN, 330 mm, type 427, axle tube Ø 125 mm
Scharmüller
Description: compatible with Q37 Daimler end cross member or Scharmüller item 34.437.001.0 Suitable for two-piece axle with axle tube Ø125 mm - axle... More
Description: compatible with Q37 Daimler end cross member or Scharmül...
€5.236,22 €4.327,45 €4.867,32 €4.022,58
You save 7%
MAHLE Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PAD Massey Ferguson
MAHLE
Refrigerant: R 134a | Reference no.: ACP 1047 000S | Pulley Ø (mm): 119 | Suitable oil: PAG 46 | No. of grooves: 6 | Connection: PAD | Nominal voltag... More
Refrigerant: R 134a | Reference no.: ACP 1047 000S | Pulley Ø (mm): 1...
€667,26 €551,45 €399,65 €330,29
You save 40%
FEBI Axial joint 210 mm, Ø 56 mm, M22 x 1,5 / M24 x 1,5
€156,85 €129,63 €52,58 €43,45
You save 66%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm. More
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€36,91 €30,50 €33,96 €28,06
You save 8%
Ball joint M24 x 1,5, 168 mm, line-Ø 34 mm Massey Ferguson
A (mm): 168 | F (mm): 26,5 | Tube Ø (mm): 34 | D (mm): M24 x 1,5 | E (mm): 23,5 More
A (mm): 168 | F (mm): 26,5 | Tube Ø (mm): 34 | D (mm): M24 x 1,5 | E ...
€92,56 €76,50 €85,16 €70,38
You save 8%
SANDEN Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PV6 Massey Ferguson
SANDEN
Pulley Ø (mm): 119 | Nominal voltage (V): 12 | Reference no.: 8244 | For compressor: SD7H15 | No. of grooves: 6 | Fixing: DM | Connection: PV6 | Refr... More
Pulley Ø (mm): 119 | Nominal voltage (V): 12 | Reference no.: 8244 | ...
€654,37 €540,80 €602,02 €497,54
You save 8%
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32,5 mm
€549,27 €453,94 €328,98 €271,89
You save 40%
MAHLE Alternator 14 V, 120 A, pulley Ø 60 mm, Poly pulley 6 ribs
MAHLE
Version: With V-ribbed belt pulley (6 ribs) | Mounting hole Ø / R (mm): 10,2 | Pulley Ø (mm): 60 | Nominal voltage (V): 14 | Mounting L / d / R (mm)... More
Version: With V-ribbed belt pulley (6 ribs) | Mounting hole Ø / R (mm...
€518,87 €428,82 €310,77 €256,84
You save 40%
SACHS Shock absorber rear, gas pressure MSE27/13X50A2 Massey Ferguson
SACHS
System: Twin-tube | Dimensions (mm): MSE27/13X50A2 | Type: Stroke-dependent damping | Installation location: hinten beidseitig | Design: Gas pressure ... More
System: Twin-tube | Dimensions (mm): MSE27/13X50A2 | Type: Stroke-depe...
€339,13 €280,27 €312,00 €257,85
You save 8%
Rail pressure valve Massey Ferguson, Valtra-Valmet, Fendt
€69,94 €57,80 €64,34 €53,18
You save 8%
Pivot right Massey Ferguson 5410-5450, 5608-5613
€406,69 €336,11 €374,15 €309,22
You save 8%
Ball joint 210 mm, M22 x 1,5 mm, M24 x 1,5 mm
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm. More
A: 210 mm. C: M22 x 1,5 mm. D: M24 x 1,5 mm.
€62,32 €51,50 €57,33 €47,38
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Temperature sensor Fendt, Massey Ferguson, Valtra-Valmet
€94,76 €78,31 €87,18 €72,05
You save 8%
AdBlue-feed unit Valtra-Valmet A84-A134
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.047,79 €865,94 €963,97 €796,67
You save 8%
Fender bracket left complete Massey Ferguson 5400-5430
€588,77 €486,59 €541,67 €447,66
You save 8%
Spring fender left Fendt, Massey Ferguson
€45,10 €37,27 €41,49 €34,29
You save 8%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
You save 8%
AdBlue injection unit Valtra-Valmet, Fendt
€717,52 €592,99 €660,12 €545,55
You save 8%
Hydraulic top link cat. 2/2, 620 - 931 mm, stroke 311 mm, Ø 63 mm
Top link type: hydraulic. Type: Ball joint/ball joint. A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 931 mm. Stroke: 311 mm. Piston rod Ø D: 35 mm. Cy... More
Top link type: hydraulic. Type: Ball joint/ball joint. A cat.: 2 / 25,...
€486,06 €401,70 €447,18 €369,57
You save 8%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€48,90 €40,41 €44,99 €37,18
You save 8%
Gas strut rear window 150 N, 485 mm, stroke 200 mm Massey Ferguson
Newtons: 150. A: 485 mm. Stroke: 200 mm. d1: 8 mm. d2: 19 mm. To fit: Rear window. Form: 6. More
Newtons: 150. A: 485 mm. Stroke: 200 mm. d1: 8 mm. d2: 19 mm. To fit: ...
€64,77 €53,53 €59,59 €49,25
You save 8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Filler cap for expansion tank
Version: For expansion tank. More
Version: For expansion tank.
€51,57 €42,62 €47,44 €39,21
You save 8%
Strut L / R 437 mm high, up to wheel size 28'' Massey Ferguson
€114,52 €94,64 €105,36 €87,07
You save 8%
Pivot fender left Massey Ferguson 5460-8732
€459,22 €379,52 €422,48 €349,16
You save 8%
Spring fender right Fendt, Massey Ferguson
€40,29 €33,30 €37,07 €30,63
You save 8%
Spring right fender Fendt, Massey Ferguson
Version: Suitable for Fendt pivoting mudguards. More
Version: Suitable for Fendt pivoting mudguards.
€37,99 €31,39
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,96 €33,03
Showing 1 - 48 of 54

Massey Ferguson 5710 parts: hitch, fenders and cooling

If your Massey Ferguson 5710 spends its days pulling trailers, the rear hitch is where the wear builds up. This page covers more than 60 parts for the 5710, from drawbar frames, top drawbars and ball hitches to thermostats, aircon compressors and tank caps. Brands include GRANIT, Walterscheid, Scharmüller, MAHLE and FEBI.

Hitching and air brakes

The drawbar frame carries the rail that the drawbar or ball slides into, with Scharmüller and Walterscheid as the familiar systems. For trailers with air brakes there are coupling heads for the supply and brake lines. Clean the heads regularly and inspect the rubber seal inside each one before the season starts. A leaking head keeps the compressor topping up and weakens the trailer brakes. Pitons and adapter plates finish off the hitch set-up.

Fenders, cooling and cab

The fenders on the 5710 sit on pivots with a spring, and both come for the left and right side. A fender that rattles or no longer springs back almost always points to one of the two. For the cooling circuit there are thermostats and temperature sensors, and for the air conditioning there are compressors. An axial joint for the steering and a beacon for road work round off the page.

A word on thermostats: fit the new one the same way round as the old one, then bleed the cooling system properly. An air pocket around the temperature sensor will otherwise give a false reading on the dash.

With the aircon compressor, check the belt as well. A glazed or cracked belt slips on the pulley and makes it seem as though the compressor has stopped cooling. The tank cap deserves a look too. A cap with a damaged seal lets moisture and dirt into the tank, and you only notice once the filters start to clog. The axial joint in the steering is easiest to check with the front axle raised. Grip the wheel front and back and rock it, and if you feel a knock, the joint is due. Mount the beacon at the highest point of the cab so it can be seen from every side.

Confirming the fit

The type plate tells you it is a 5710. With fender parts, check which side you need, and with a thermostat or sensor compare the number on the old unit with the reference number given for the product.

The 5710 is part of the 5700 series alongside the Massey Ferguson 5711, which has a page of its own. That is useful when both models work on the same farm. All other models sit under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart