Menu
EUR

Massey Ferguson 390 tractor parts & technical data

Electrics, lighting, and brake and transmission components stand out among more than 400 parts for the Massey Ferguson 390 from the 300 Series on this page.

403 parts found for Massey Ferguson 390
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€124,74 €103,09 €114,76 €94,84
You save 8%
Sealing ring fuel line Ø 8 x 4,6 mm, tube-Ø 3/16 inch
Dimensions: Height 6, Outer Ø 8, Inner Ø 4.6, For pipe Ø 3/16" mm. More
Dimensions: Height 6, Outer Ø 8, Inner Ø 4.6, For pipe Ø 3/16" mm.
€1,04 €0,86
Installation cable mini-contact plug 1 m
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510. More
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€171,07 €141,38 €157,38 €130,07
You save 8%
Indicator-width bulb LED 12 / 24 V, 84 x 84 x 51 mm, cable 4000 mm
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light function: Indicator, position light | Nominal voltage (V): 12 / 24 | Additional ... More
Connection: Nylon 6.3 | Bulbs included: Yes | Fixing: Screwed | Light ...
€54,98 €45,44 €50,58 €41,80
You save 8%
Pump screenwash tank 12 V, intake-Ø 6,3 mm, press-Ø 6,3 mm
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system. Voltage: 12 V. Connection type: 2 x 6,3. Operating mode: electric. More
Intake Ø: 6.3 mm. Outlet Ø: 6.3 mm. To fit: Windscreen washer system...
€35,49 €29,33 €32,65 €26,98
You save 8%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Ball joint 80 mm, M22 x 1,5, M22 x 1,5, taper 24 - 26 mm
A: 80 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 80 mm. C: M22 x 1,5 mm. D: M22 x 1,5 mm. E: 24 mm. F: 26 mm. Taper:...
€48,42 €40,02 €44,55 €36,82
You save 8%
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€20,09 €16,60
GRAMMER Seat Compacto Basic S MSG83/511, mechanical, PVC, 400 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 400 mm. Fore/aft isolator: Optional. Sea... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.054,87 €871,79 €970,48 €802,05
You save 8%
Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally closed, Blade terminal. More
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally cl...
€11,46 €9,47
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
€2.146,48 €1.773,95 €1.697,03 €1.402,50
You save 21%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€35,42 €29,27 €32,59 €26,93
You save 8%
LUK Clutch plate 300TSFN 25 x 29 mm 21 splines, organic
LUK
Dimensions (mm): 25 x 29 21 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 25 x 29 21 grooves | Material specifications: Organic...
€136,15 €112,52 €125,26 €103,52
You save 8%
Eaton Pinion transmission Massey Ferguson 362 - 4370
Eaton
Reference no.: 3613627M1 More
Reference no.: 3613627M1
€265,44 €219,37 €244,20 €201,82
You save 8%
Gear wheel intermediate shaft synchro unit-transmission 53 teeth Massey Ferguson
€250,00 €206,61 €230,00 €190,08
You save 8%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.022,73 €845,23 €940,91 €777,61
You save 8%
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: consumer, 2: start, Installation dimension: Ø 16.5 mm, Without preheat... More
Version: 12 V, with 4 blade terminal connections, Switch positions: 0:...
€16,13 €13,33
HELLA Indicator/position light 12 V, R21W/C5W, yellow/white - 2 pieces
HELLA
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horizontal, yellow indicator light, white position light, with 2 holes for M4 fixing ... More
Bulb: 12V5WS / C5W 12V21WK / R21W | Version: For front mounting, horiz...
€47,11 €38,94
HELLA Starter motor 12 V, 2,8 kW, 10 teeth, flange 89 mm, clockwise
€503,79 €416,36 €485,20 €401,00
You save 4%
Eaton Thrust washer transmission Massey Ferguson
Eaton
Reference no.: 1677742M2 More
Reference no.: 1677742M2
€33,40 €27,60
Eaton Locking plate transmission Massey Ferguson
Eaton
Reference no.: 828020M1 More
Reference no.: 828020M1
€0,66 €0,55
Filter dryer Ø 76 mm, 228 mm, connection thread M
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O-ring B = male thread 3/8"" - 18UNF Pressure switch thread: 1 3/8"" - 24 O-ring ... More
Outer Ø (mm): 76 | Connection: O-ring A = male thread 3/8"" - 18UNF O...
€63,79 €52,72 €58,69 €48,50
You save 8%
LUK Clutch kit Massey Ferguson 362 - 4335
LUK
Contents: Pressure plate 458131005110, clutch plate 458331015810 More
Contents: Pressure plate 458131005110, clutch plate 458331015810
€760,42 €628,45 €699,59 €578,17
You save 8%
Alternator 14 V, 70 A, flange 82 mm
Form: A | Flange size (mm): 82,0 | Direction of rotation: ↻ | Installation angle (°): l 60 | Nominal voltage (V): 14 | Belt tension hole Ø / R (mm... More
Form: A | Flange size (mm): 82,0 | Direction of rotation: ↻ | Instal...
€154,77 €127,91 €142,39 €117,68
You save 8%
Eaton Synchronisation clamp transmission Massey Ferguson 158 F - 5365, 538 g
Eaton
Reference no.: 1686458M1 More
Reference no.: 1686458M1
€79,17 €65,43 €72,84 €60,20
You save 8%
Blue Print Engine oil filter W940/1, LF3401, Ø 93 mm, height 142 mm, 3/4-16 UNF
€17,02 €14,07 €6,95 €5,74
You save 59%
FEBI Alternator 14 V / 70 A, form A, flange 80,5 mm
FEBI
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguson More
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguso...
€213,83 €176,72 €161,65 €133,60
You save 24%
As synchro unit 12-gears, 21 teeth, 406,4 mm Massey Ferguson
Number of teeth: 21. Length: 406,4 mm. More
Number of teeth: 21. Length: 406,4 mm.
€127,34 €105,24 €117,15 €96,82
You save 8%
Drive shaft reversing clutch 12 gears input shaft 20 teeth
€166,64 €137,72 €153,31 €126,70
You save 8%
Seal water pump
€11,35 €9,38
Cobo Flasher unit 12 V, 2+1+1 / 8 x 21 W, 6 connections, with holder
Cobo
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard warning light function. More
Version: 12 V / 2 + 1 + 1 x 21 / 8 x 21 W, With bracket, With hazard w...
€58,12 €48,03 €53,47 €44,19
You save 8%
Horn 12 V with bracket, Ø 97 mm, blade terminal 2 x 6,3 mm
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270, 275, 283, 290, 298, 340, 342, 350, 352, 355, 360, 362, 365, 375, 383, 390, 393... More
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270...
€24,75 €20,45
Main shaft transmission Massey Ferguson 362 - 4370
€1.258,04 €1.039,70 €1.157,40 €956,53
You save 8%
LUK Clutch plate 300USC 25 x 29 mm 21 splines, sintered Massey Ferguson
LUK
Dimensions (mm): 25 x 29 21 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 25 x 29 21 grooves | Material specifications: Sintere...
€282,10 €233,14 €259,53 €214,49
You save 8%
Steering cylinder Massey Ferguson 365 - 399
€420,20 €347,27 €386,58 €319,49
You save 8%
Single clutch G 310 38,1 x 41,4, 25 splines, flywheel 40 mm
Flywheel dimension (mm): 40 | Additional information: Made in Germany | Dimensions (mm): 38.1 x 41.4 25 grooves More
Flywheel dimension (mm): 40 | Additional information: Made in Germany ...
€457,92 €378,45 €421,29 €348,17
You save 8%
Thrust bearing 63,5 x 100 x 22 mm Ford, Massey Ferguson, New Holland
Dimensions (mm): 63.5 x 100 x 22 More
Dimensions (mm): 63.5 x 100 x 22
€37,69 €31,15 €34,67 €28,66
You save 8%
Alternator 14 V / 33 A, flange 27 mm John Deere, Lindner, Massey Ferguson
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 | Nominal voltage (V): 14 | Pulley Ø (mm): 80,0 | Nominal values (V / A): 14 / ... More
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 ...
€137,22 €113,41 €126,24 €104,33
You save 8%
Scharmüller Drawbar frame for draw pendulum, rail 330 mm, Dc 55 kN, Kioti gray
Scharmüller
Detent pin Ø (mm): 25 | Version: Prepared for drawbar | Colour: Kioti grey | Load capacity (kg): 2000 | Category: Bearing supports | Guide width (mm)... More
Detent pin Ø (mm): 25 | Version: Prepared for drawbar | Colour: Kioti...
€1.074,22 €887,79 €1.038,28 €858,08
You save 3%
Eaton SELECTOR transmission Massey Ferguson
Eaton
Reference no.: 023416R1 More
Reference no.: 023416R1
€71,59 €59,17 €65,86 €54,43
You save 8%
Eaton Sonnenrad transmission Challenger, Massey Ferguson
Eaton
Reference no.: 1866552M1 More
Reference no.: 1866552M1
€50,20 €41,49
FEBI Fuel filter Ø 84 mm, inner-Ø 19 mm
€14,06 €11,62 €6,38 €5,27
You save 55%
FEBI Alternator 14 V / 33 A, form B, flange 27,0 mm, pulley-Ø 80,0 mm
FEBI
To fit as: Lindner, Massey Ferguson More
To fit as: Lindner, Massey Ferguson
€25,53 €21,10 €13,18 €10,89
You save 48%
Showing 1 - 48 of 403

Massey Ferguson 390 parts for the linkage, clutch and engine

The MF 390 is still a working tractor on many farms, and with a machine that has done this many hours the repairs tend to come back to the same places. This page carries more than 400 Massey Ferguson 390 parts, from small sealing rings to clutch plates.

Linkage that drops under load

If the linkage slowly sinks with an implement on, the lift cylinder seals are usually the first suspect. For the 390 there are lift cylinder sealing rings, lift shaft seals, gear wheels for the linkage and repair kits. Yokes for the three point linkage, ball joints, shafts and thrust washers are also on this page. When you reseal the lift cylinder, inspect the bore carefully. Score marks or rust pitting will cut new seals straight away and you will be doing the job twice.

Clutch, engine and electrics

For the driveline there are clutch plates, including LUK. With the clutch apart, renew the release bearing and check the flywheel face for hot spots, scoring and fine cracks. A new plate on a glazed flywheel will not last. Make sure the plate slides freely on the input shaft splines, with just a trace of grease. On the engine side you will find alternators, starter motors, V-belts and gaskets, such as the exhaust gasket. Other brands here include GRANIT, Eaton, Cobo and MAHLE.

Do not overlook the V-belt. A slipping belt undercharges the battery and slows the water pump, and you often only notice when the battery is flat or the temperature gauge climbs. Shiny flanks or cracks on the inside mean it is time for a new one. Retension a new belt after the first day of work, because it stretches a little as it beds in.

Cab parts

Inside the cab, what wears is what you move every day. There are door gas struts, so the door stays open again, and Compacto seat cushions. Fit a gas strut with the rod pointing down, which keeps the seal inside the body lubricated and makes it last longer.

Confirming the model and the rest of the 300 series

The rating plate tells you if you have a 390 or a 390T, which is a separate model with its own page. Older Massey Ferguson parts often carry a reference number on the part itself or in the description, which makes comparing easy. These tractors from the same 300 series have their own pages:

Every other model is listed on the main Massey Ferguson parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart