Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

Massey Ferguson 8S.225 tractor parts & technical data

What fits the Massey Ferguson 8S.225? More than 40 parts for the 8S series, with trailer couplings, three-point linkage parts and electrics making up the bulk.

46 parts found for Massey Ferguson 8S.225
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Wabco Electrically controlled air dryer M22 x 1,5, cartridge M39, 13 bar
€412,20 €340,66 €379,22 €313,41
You save 8%
LED headlight 12/24 V, 117.4 x 125 x 112.3 mm, left/right
Protection class: IP66, IP6K9K | Form: Round | Nominal voltage (V): 12 / 24 | Housing material: Aluminum | Connection: 9005, AMP | Installation locati... More
Protection class: IP66, IP6K9K | Form: Round | Nominal voltage (V): 12...
€145,96 €120,63 €134,28 €110,98
You save 8%
Scharmüller Drawbar frame standard ball 80, 104 kN, 4000 kg, rail 390 mm
Scharmüller
Detent pin Ø (mm): 25 | Colour: AGCO grey | Lock: Ball 80 manual | Rail width (mm): 390 | Category: Bearing supports | Version: Standard | D-value (k... More
Detent pin Ø (mm): 25 | Colour: AGCO grey | Lock: Ball 80 manual | Ra...
€2.326,08 €1.922,38 €2.189,99 €1.809,91
You save 6%
HELLA Headlight left / right 12 V, H7, built-in, glass Ø 90 mm Fendt
HELLA
Bulb: 12V55W / H7. Dimensions: 108 x 181.7 mm. Connection: AMP. Form: Round. Height: 108 mm. Material: Diffusing lens: glass. Depth: 181,7 mm. Install... More
Bulb: 12V55W / H7. Dimensions: 108 x 181.7 mm. Connection: AMP. Form: ...
€157,83 €130,44 €152,01 €125,63
You save 4%
Walterscheid Inner part ball 80 rail width 390 mm, pin Ø 25 mm, 4000 kg
Walterscheid
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value (kN): 102 | Detent pin Ø (mm): 25 | Rail width (mm): 390 | Description: This pr... More
Colour: Black | Load capacity (kg): 3000 | Ball Ø (mm): 80 | D-value ...
€2.263,90 €1.870,99 €1.789,86 €1.479,23
You save 21%
Scharmüller Drawbar retrofit kit 80 x 50 mm, 89,3 kN, 2200 kg, cat. 2, AGCO gray
Scharmüller
Mounting position: 2 | Colour: AGCO grey | Width (mm): 80 | Load capacity (kg): 2200 | Version: Retrofit kits | D-value (kN): 89,3 | Height (mm): 50 |... More
Mounting position: 2 | Colour: AGCO grey | Width (mm): 80 | Load capac...
€620,46 €512,78 €570,82 €471,75
You save 8%
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth, clockwise, Ø 89 mm
€533,50 €440,91 €319,53 €264,08
You save 40%
Walterscheid Piton Fix rail width 390 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.781,58 €1.472,38 €1.408,53 €1.164,08
You save 21%
Hydraulische Hubstrebe clevis / ball joint, 670 mm, Ø 92 mm
Type: Gabelgelenk / Kugelgelenk | S1 (mm): 37 | To fit: Massey Ferguson, Valmet & Valtra, John Deere | B (mm): 28 | D (mm): 92 | C (mm): 40 | L (mm): ... More
Type: Gabelgelenk / Kugelgelenk | S1 (mm): 37 | To fit: Massey Ferguso...
€812,82 €671,75 €747,79 €618,01
You save 8%
Aircon compressor 12 V, 154,8 cm³, Ø 144 mm, PV6 Massey Ferguson
No. of grooves: PV6 | Nominal voltage (V): 12 | Suitable oil: PAG 46 | Pulley Ø (mm): 144 | Fixing: DM | Additional information: Pistons: 7 | Refrige... More
No. of grooves: PV6 | Nominal voltage (V): 12 | Suitable oil: PAG 46 |...
€400,63 €331,10 €368,58 €304,61
You save 8%
Walterscheid Drawbar ball 80 automatic, rail 390 mm, pin Ø 25 mm, 2000/2800 kg
Walterscheid
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 / 2800 kg. Colour: black. Description: This product is a ball hitch.... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€2.277,79 €1.882,47 €1.850,84 €1.529,62
You save 19%
Scharmüller Drawbar pin-Ø 31,5 mm, 1003 mm, category 2, AGCO gray
Scharmüller
Load capacity (kg): 2200 | Width (mm): 80 | Pin Ø (mm): 31,5 | Mounting position: 2 | Version: Standard | Lock: Pin | D-value (kN): 89,3 | Colour: AG... More
Load capacity (kg): 2200 | Width (mm): 80 | Pin Ø (mm): 31,5 | Mounti...
€469,58 €388,08
Brake disc outer-Ø 250 mm, inner-Ø 71 mm, thickness 4,9 mm
Inner Ø (mm): 71 | Outer Ø (mm): 250 | Thickness (mm): 4,9 More
Inner Ø (mm): 71 | Outer Ø (mm): 250 | Thickness (mm): 4,9
€105,28 €87,01 €96,86 €80,05
You save 8%
Scharmüller Drawbar frame standard Piton fix, 97,1 kN, 3000 kg, rail 390 mm
Scharmüller
Rail width (mm): 390 | Lock: Piton Fix manual | Guide width (mm): 32 | Colour: AGCO grey | D-value (kN): 97,1 | Category: Bearing supports | Version: ... More
Rail width (mm): 390 | Lock: Piton Fix manual | Guide width (mm): 32 |...
€1.562,20 €1.291,07 €1.487,22 €1.229,11
You save 5%
SACHS Shock absorber rear MSE30/15X70A2 gas pressure Massey Ferguson 3,87 kg
SACHS
Installation location: hinten beidseitig | Design: Gas pressure | To fit: Massey Ferguson | System: Twin-tube | Dimensions (mm): MSE30/15X70A2 More
Installation location: hinten beidseitig | Design: Gas pressure | To f...
€689,93 €570,19 €634,74 €524,57
You save 8%
Automatic brake Ø 291 mm
€444,13 €367,05 €408,60 €337,69
You save 8%
FEBI Engine oil filter Ø 108 mm, height 144,2 mm, thread M24 x 1,5
€34,35 €28,39 €14,07 €11,63
You save 59%
MAHLE Starter motor 12 V, 3,0 kW, 10 teeth clockwise, 244 mm, Ø 89 mm
€488,55 €403,76 €292,61 €241,83
You save 40%
Walterscheid Drawbar support rail 390 mm, 92 kN, nose weight 3500 kg, Fendt gray
Walterscheid
H (mm): 52 | F (mm): 260 | C (mm): 25 | G (mm): 232 | Description: The drawbar supports are height-adjustable sliding plates that can only be operated... More
H (mm): 52 | F (mm): 260 | C (mm): 25 | G (mm): 232 | Description: The...
€2.388,91 €1.974,31 €1.888,69 €1.560,90
You save 21%
Temperature sensor exhaust aftertreatment
€233,28 €192,79 €214,62 €177,37
You save 8%
Hydraulische Hubstrebe clevis / clevis, 800 mm, Ø 120 mm
To fit: Massey Ferguson, Valmet & Valtra | D (mm): 120 | Type: Gabelgelenk / Gabelgelenk | L (mm): 800 | C (mm): 45 | A (mm): 32 More
To fit: Massey Ferguson, Valmet & Valtra | D (mm): 120 | Type: Gabelge...
€1.121,70 €927,02 €1.031,96 €852,86
You save 8%
SACHS Shock absorber rear gasdruck zweirohr MSE36/20x70A2 ED Massey Ferguson
SACHS
Dimensions (mm): MSE36/20x70A2 ED | Installation location: hinten beidseitig | Design: Gasdruck | To fit: Massey Ferguson | System: Zweirohr More
Dimensions (mm): MSE36/20x70A2 ED | Installation location: hinten beid...
€1.245,77 €1.029,56 €1.146,11 €947,20
You save 8%
DANA Spicer King pin final drive front axle 755
€114,51 €94,64 €105,35 €87,07
You save 8%
Differential pressure sensor Massey Ferguson, Valtra-Valmet, Fendt
€176,91 €146,21 €169,54 €140,11
You save 4%
Hydraulische Hubstrebe clevis / clevis, 800 mm, Ø 102 mm
To fit: Massey Ferguson | S1 (mm): 37,5 | C (mm): 45 | Type: Gabelgelenk / Gabelgelenk | D (mm): 102 | L (mm): 800 | A (mm): 28 More
To fit: Massey Ferguson | S1 (mm): 37,5 | C (mm): 45 | Type: Gabelgele...
€1.024,16 €846,41 €942,23 €778,70
You save 8%
Walterscheid Control kit for hydraulic lateral stabilisers HGST
Walterscheid
Description: Product advantages: Automatic switching between rigid and floating position when raising and lowering the power lift Permanent rigid or f... More
Description: Product advantages: Automatic switching between rigid and...
€3.018,96 €2.495,01 €2.613,27 €2.159,73
You save 13%
HELLA Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, clockwise
€387,22 €320,02 €298,35 €246,57
You save 23%
DANA Spicer Shaft seal final drive front axle 755, 356 g
€150,53 €124,41 €144,26 €119,23
You save 4%
Walterscheid Stabilizer HGST hydraulic base 350 mm, M30, stroke 40 mm
Walterscheid
L: 350 mm. G: M30 mm. Stroke: 40 mm. Description: <b>Product advantages:</b> Automatic switching between rigid and floating position when raising and ... More
L: 350 mm. G: M30 mm. Stroke: 40 mm. Description: <b>Product advantage...
€1.003,16 €829,06 €747,08 €617,43
You save 26%
Scharmüller Support plates ball 80, 965 x 270 mm, thickness 50 mm, 97,1 kN
Scharmüller
Thickness (mm): 50 | Load capacity (t): 3 | Number of heart pins: 1 | Lock: ball 80 | Colour: AGCO grey | Category: Support plates | Version: Standard... More
Thickness (mm): 50 | Load capacity (t): 3 | Number of heart pins: 1 | ...
€2.025,12 €1.673,65 €1.913,11 €1.581,08
You save 6%
NOX sensor Massey Ferguson, Challenger, Valtra-Valmet
€874,29 €722,55 €804,35 €664,75
You save 8%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€38,47 €31,79 €35,39 €29,25
You save 8%
Hydraulic top link cat. 3, 680 - 895 mm, stroke 215 mm, 14 ton
A cat.: 3 / 32. B cat.: 3 / 32. F: 680 / 895 mm. Piston rod Ø D: 45 mm. Cylinder Ø inner E: 105 mm. Lifting force: 14 t. Tensile force: 9 t. Adjusta... More
A cat.: 3 / 32. B cat.: 3 / 32. F: 680 / 895 mm. Piston rod Ø D: 45 m...
€940,99 €777,68 €865,71 €715,46
You save 8%
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€89,72 €74,15 €82,54 €68,22
You save 8%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,55 €32,69 €36,39 €30,07
You save 8%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod Ø: 10 - 22 mm. More
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unhe...
€48,90 €40,41 €44,99 €37,18
You save 8%
AdBlue-filter Fendt, John Deere, Massey Ferguson
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no.: P956170. Fleetguard no.: UF101. Hifi no.: SD70380. Hengst no.: E103UD295. More
Description: for AdBlue supply unit. MANN no.: U5001KIT. Donaldson no....
€59,17 €48,90 €54,44 €44,99
You save 8%
Walterscheid Adapter plate rail width 390 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 2800 kg. D-value: 89,3 kN. Central hole: 95 mm. Hole pattern: 160 x 100 m... More
Rail width: 390 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
€1.150,89 €951,15 €909,90 €751,99
You save 21%
Signal transmitter exhaust aftertreatment 930 mm
Description: length: 930 mm. More
Description: length: 930 mm.
€786,41 €649,93
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€39,96 €33,03
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Ø: 54 mm. Temperature: 80 °C. More
Ø: 54 mm. Temperature: 80 °C.
€26,13 €21,59

Massey Ferguson 8S.225 parts for hitching, lighting and upkeep

An 8S.225 spends its days pulling trailers, tippers and implements, and the parts on this page follow that work. There are more than 40 of them from GRANIT, Walterscheid, Scharmüller, HELLA and MAHLE, all matched to this Massey Ferguson.

What is available for the 8S.225

  • Hitching: ball drawbars, drawbar frames, adapter plates, a Piton coupling and a drawbar retrofit kit in AGCO grey.
  • Three-point linkage: a hydraulic top link and stabilizers for the lower links.
  • Air brakes: connector heads for the trailer brake lines.
  • Lights and visibility: headlights, a beacon, mirrors and a screenwash pump.
  • Engine and suspension: a thermostat, a starter motor and shock absorbers.

Getting the air couplings right

On a dual-line system the red connector head is the supply line and the yellow one the control line to the trailer brakes. Never swap them. Keep the dust covers closed when nothing is hitched, because dirt damages the rubber seal inside, and the system then loses air as soon as a trailer is coupled. If you hear a hiss with the trailer attached, replace the connector head or its sealing ring.

With a hydraulic top link, the ball category has to match both your linkage and the implement. Also check that the stroke is enough for the implements you run, especially if you switch between heavy and light machines.

Suspension, stabilizers and cooling

A leaking shock absorber shows up as an oily film on the body and a cab or axle that keeps bouncing. Replace shock absorbers in pairs so both sides damp equally. Lock the stabilizers when an implement has to run tight behind the tractor, such as a rotary harrow or drill, and give them some play for work where the implement may follow.

If the engine never reaches working temperature, the thermostat is probably stuck open. Replace it together with its seal and bleed the cooling system properly afterwards.

Checking part and model

The type plate on your 8S.225 gives the type and serial number. For drawbar parts, the rail width and the hole pattern of the adapter plate help too, and the old part often carries a reference number you can compare directly with the parts on this page.

Other 8S tractors

More models in the 8S series have a page of their own, each showing only the parts for that model:

Older and other series from the make are under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart