Hitch or linkage on your Claas Axion 820 due for replacement? Choose from more than 70 matching parts, such as trailer couplings and three-point linkage parts.
Long days on an Axion 820 make the seat matter. This page holds more than 70 parts for the Claas Axion 820, from air suspended seats to drawbars and an aircon compressor. Brands include Scharmüller, GRAMMER, Walterscheid, ROCKINGER and GRANIT.
Seats and tractor seats are listed, some of them from GRAMMER, including models with air suspension and a seat heater. If the seat slowly sinks or the suspension compressor keeps running, check the air bag and the small hoses for cracks before ordering a complete seat. If you do need a new one, compare the hole spacing on the seat console with the old seat and make sure the power plug matches.
For the rear of the Axion 820 there are drawbars, top drawbars, Piton Fix pins, adapter plates, automatic hitches and drawbar frames. Support plates with a ball insert and screw-on ball adapters are there if you work with a ball hitch. Forced steering is needed for trailers with steered axles, and hydraulic top links make it easier to set mounted implements. Grease the ball at every major service to save wear on ball and socket.
Aircon compressors are available for this model too. After replacing one, have a certified technician evacuate and refill the system and renew the receiver drier at the same time. Moisture in the circuit is the fastest route to a second failed compressor.
A screw-on ball adapter lets you mount a ball onto an existing holder. Always tighten it to the correct torque and check after the first few trips that it is still firm, because a ball that works loose puts play into the whole coupling. On an automatic hitch, keep the jaw clean and grease the coupling pin regularly so it drops home even with a muddy drawbar eye.
Read the type plate to confirm it is an Axion 820. The old part often has a reference number on a sticker or stamped into it. For drawbars, also measure the rail width and pin diameter.
The Axion 820 belongs to the Claas Axion series. Other models from that series have their own page with only the parts that fit them:
The whole brand is under Claas parts.