Menu
EUR

Fiat 65-88 tractor parts & technical data

Sorting through parts for a Fiat 65-88? This 88 series tractor has more than 200 of them on this page, such as lighting, electrics and trailer couplings.

240 parts found for Fiat 65-88
Show:
Eaton Gear wheel transmission 1,57 kg Case IH, Fiat, Ford, New Holland
Eaton
Reference no.: 5125013 More
Reference no.: 5125013
€312,66 €258,40 €297,00 €245,45
You save 5%
GRANIT Bush 10 teeth Fiat Series 56 - 94, L 60-95, New Holland TN55-TN95
€46,46 €38,40 €44,10 €36,45
You save 5%
GRANIT Ball joint 1303 mm, taper 18 - 20,2 mm, M16 x 1,5 / M20 x 1
GRANIT
A: 1303 mm. C: M16 x 1,5 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm. More
A: 1303 mm. C: M16 x 1,5 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Tape...
€164,63 €136,06 €156,35 €129,21
You save 5%
GRANIT Ball joint 80 mm, 5/8" x 18, M20 x 1, taper 18 - 20,2 mm
GRANIT
A: 80 mm. C: 5/8" x 18 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper: 18 - 20,2 mm. More
A: 80 mm. C: 5/8" x 18 mm. D: M20 x 1 mm. E: 18 mm. F: 20,2 mm. Taper:...
€38,75 €32,02
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 mm. B: 30 mm. C: 12 mm. Ø D: 20 mm. Ø E: 20 mm. Ø F: 20 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€258,60 €213,72
GRANIT Gear lever knob Ø upper 20 mm, length 35 mm, thread M8
GRANIT
Version: Ø top 20 mm, length 35 mm, thread M8. More
Version: Ø top 20 mm, length 35 mm, thread M8.
€7,00 €5,79
GRANIT Water pump with connecting flange and seal engine Ford, Fiat, Renault
GRANIT
Description: With gasket. More
Description: With gasket.
€125,51 €103,73 €119,20 €98,51
You save 5%
GRANIT Water pump with flange-mounted design and gasket Ford, Fiat
GRANIT
To fit: Fiat. Reference no.: S.59000. Version: Old version with flange connection and gasket. Description: With gasket. More
To fit: Fiat. Reference no.: S.59000. Version: Old version with flange...
€122,95 €101,61 €116,80 €96,53
You save 5%
Cylinder head bolt M12 x 1,25 x 122 mm Ford, Fiat, New Holland
Dimensions: M12 x 1.25 x 122 mm. More
Dimensions: M12 x 1.25 x 122 mm.
€6,75 €5,58
Oil pump Fiat 350-855
GRANIT Bearing for lower link shaft Ø 25 mm Ford, Case IH, Fiat, New Holland
€48,32 €39,93 €45,90 €37,93
You save 5%
GRANIT Wiper motor 12 V Fiat Series 88
GRANIT
Volts: 12. More
Volts: 12.
€286,24 €236,56 €271,90 €224,71
You save 5%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
Holder right Fiat Series 66-94
€58,21 €48,11 €52,65 €43,51
You save 10%
GRANIT Brake light switch oil pressure make contact, neutral position off, M10 x 1
GRANIT
Version: Thread M10 x 1, normally off, make contact, Blade terminal. More
Version: Thread M10 x 1, normally off, make contact, Blade terminal.
€37,90 €31,32 €36,00 €29,75
You save 5%
Cobo Tank sender main tank, stroke 389 mm
Cobo
Version: Main tank, stroke: 389 mm. More
Version: Main tank, stroke: 389 mm.
€80,45 €66,49 €72,75 €60,12
You save 10%
Cobo Indicator/position light 169 x 62 x 90 mm, P21W, R5W left
Cobo
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 mm. Form: Rectangular. Height: 62 mm. Dimensions W x H x D: 169 x 62 x 90 mm. De... More
Bulb: 12V21WK / P21W, 12V5WK / R5W. Colour: Yellow, white. Width: 169 ...
€50,33 €41,60 €45,50 €37,60
You save 10%
GRANIT Relays make contact 12 V, 30 A, without bracket, 5-pin, 6,3 mm
GRANIT
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 30 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€29,20 €24,13
GRANIT Clutch cable driving clutch 480 mm, sleeve length 255 mm, M6 Fiat
GRANIT
Sleeve length (mm): 255 | Cable length (mm): 480 | Thread: M6 More
Sleeve length (mm): 255 | Cable length (mm): 480 | Thread: M6
€35,20 €29,09
LUK Clutch plate 280UKF 22 x 25 mm, 10 splines
LUK
Dimensions (mm): 22 x 25 10 grooves More
Dimensions (mm): 22 x 25 10 grooves
€133,57 €110,39 €126,85 €104,83
You save 5%
Showing 73 - 96 of 240

Fiat 65-88 parts to keep a classic working

The Fiat 65-88 has plenty of life left in it if the wear items are dealt with in time. More than 200 parts on this page fit this tractor. They are new replacement parts from GRANIT and from manufacturers including Cobo, LUK, MAHLE and Walterscheid.

Electrics and lighting

If the battery is not charging, an alternator is the likely candidate. For starting there are gear reduction starters, which turn the engine over with less current draw than an older direct drive unit. Inside the cab, worn rocker switches are a simple swap. On the lighting side, an indicator or position light often only has a cracked or faded lens while the housing and bulb holder are still sound. In that case a separate lamp glass is all you need, and the complete light for left or right is there when the housing itself has given up.

Cooling, hydraulics and steering

  • Thermostats with matching O-rings, plus gaskets for the water pump and oil sump
  • Hydraulic pumps and lifting shaft seals
  • Ball joints for the steering linkage
  • Thrust bearings for the driving clutch
  • Exhaust tubes, drawbars and an air suspended tractor seat

Pump rotation matters

Before ordering a hydraulic pump, check the direction of rotation and the drive. A pump turning the wrong way will not deliver oil and can be damaged quickly. The rotation is stated for every pump, so compare it with the unit you are taking off.

Before you replace the alternator

Measure the charging voltage with the engine running and check the earth strap first. A poor earth connection on an older tractor gives exactly the same symptoms as a failed regulator, and costs a lot less to fix. If the alternator really is at fault, compare the pulley and mounting flange of the old unit with the new one before fitting.

Identifying your 65-88 parts

The type plate tells you which model you have. On a tractor of this age some parts may already have been swapped for different ones over the years, so the number on the old part is a more dependable guide than memory. Hold it against the references listed with each product. For shaft seals, measuring inner diameter, outer diameter and thickness is a sure way to get the right one.

Other models in the 88 series

If you also look after a Fiat 60-88 or a Fiat 70-88, each has its own page listing what fits that model. For everything from this make, go to Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart