Menu
EUR

Fiat 90-90 tractor parts & technical data

If there is a Fiat 90-90 in your yard, this is your overview: more than 200 parts for the 90 series, including lighting, electrics and trailer couplings.

235 parts found for Fiat 90-90
Show:
Track rod four-wheel drive A 1650 - 1700 mm, B M20 x 1, E 32 mm
A: 1650 - 1700 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm. E: 32 mm. F: 19 mm. More
A: 1650 - 1700 mm. B: M20 x 1 mm. C: 18 - 20 mm. G: . D: M16 x 1,5 mm....
€225,88 €186,68 €214,55 €177,31
You save 5%
Expander Expander repair bolt 52 mm, Ø 25 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 52 mm. B: 31 mm. C: 12 mm. Ø D: 25 mm. Ø E: 20 mm. Ø F: 25 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€296,34 €244,91 €281,50 €232,64
You save 5%
GRANIT Brake hose Fiat, New Holland, Case IH, Ford
€60,44 €49,95 €57,40 €47,44
You save 5%
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
GRANIT Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
GRANIT
Ø: 54 mm. Temperature: 79 °C. More
Ø: 54 mm. Temperature: 79 °C.
€23,30 €19,26
GRANIT Steering valve ew/dw with float position 220 bar, 70 l/min
GRANIT
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: max. 70 l/min, Tightening torque: 30 Nm, Connections: M18 x 1.5, Dimensions: 210 ... More
Technical data: Max. operating pressure: 220 bar, Nominal flow rate: m...
€901,21 €744,80 €856,10 €707,52
You save 5%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
GRANIT Holder left Fiat Series 66-94
€55,44 €45,82 €52,65 €43,51
You save 5%
GRANIT Drive shaft 820 mm, M18 x 1,5 / M16 x 1
GRANIT
Version: Thread: M18 x 1.5 / M16 x 1. More
Version: Thread: M18 x 1.5 / M16 x 1.
€33,30 €27,52
Cobo Lamp glass left
Cobo
Installation location: Left. More
Installation location: Left.
€18,60 €15,37
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.214,60 €1.003,80 €954,30 €788,68
You save 21%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€188,76 €156,00 €179,30 €148,18
You save 5%
GRANIT Clutch cable driving clutch 480 mm, sleeve length 255 mm, M6 Fiat
GRANIT
Sleeve length (mm): 255 | Cable length (mm): 480 | Thread: M6 More
Sleeve length (mm): 255 | Cable length (mm): 480 | Thread: M6
€35,20 €29,09
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€33,94 €28,05 €32,20 €26,61
You save 5%
LUK Clutch plate 310UKF 24 x 28 mm, 10 splines Fiat
LUK
Dimensions (mm): 24 x 28 10 grooves More
Dimensions (mm): 24 x 28 10 grooves
€171,95 €142,11 €163,35 €135,00
You save 5%
Expander Expander repair bolt 53 mm, Ø 20 mm, GRUB SCREW, spread 0 - 2 mm
Expander
Type: With threaded pin at both ends, hexagon nut, with lubrication hole. A: 53 mm. B: 30 mm. C: 12 mm. Ø D: 20 mm. Ø E: 20 mm. Ø F: 20 mm. G: 12 m... More
Type: With threaded pin at both ends, hexagon nut, with lubrication ho...
€258,60 €213,72
Cylinder head bolt M12 x 1,25 x 122 mm Ford, Fiat, New Holland
Dimensions: M12 x 1.25 x 122 mm. More
Dimensions: M12 x 1.25 x 122 mm.
€6,75 €5,58
Silencer vertical enamelled 820 mm, inner Ø 60 mm Fiat
Version: Length: 820 mm, Inner Ø: 60 mm. More
Version: Length: 820 mm, Inner Ø: 60 mm.
€109,47 €90,47 €103,95 €85,91
You save 5%
GRANIT Fuel tank Fiat series 88, 90, 93, 94
€642,51 €531,00 €610,35 €504,42
You save 5%
Showing 49 - 72 of 235

Fiat 90-90 parts for the linkage, engine and steering

Most Fiat 90-90 tractors have a lot of hours behind them, and it shows in seals, bearings and bushes. More than 200 replacement parts fit this model, from GRANIT and from makers such as Cobo, Walterscheid, Bosch/Rexroth and FLEETGUARD.

Bringing the linkage back to life

If the linkage slowly drops with an implement on, the leak is often in the lift cylinder. There are seals for the outer lift cylinder and piston sealing rings, along with bushes for the lift arm shaft and lift rods. For oil pressure there is a single hydraulic pump from Bosch/Rexroth. Before fitting new seals, inspect the cylinder bore for scoring. A groove in the bore will chew through fresh seals in no time and the job will have been wasted.

Engine, clutch and front axle

For cooling there is a thermostat with its O-ring, plus gaskets for the water pump and the rear engine cover. A FLEETGUARD air filter with a separate inner element keeps the intake clean. The driving clutch can take a new thrust bearing, the steering new ball joints, and the brakes new brake cylinder O-rings. Lamp glasses, holders, yokes and rocker switches complete the list.

A quick note on the inner air filter: replace it rather than blowing it out. It is the last line of defence for the engine if the outer element is ever damaged.

Thrust bearing and clutch

A thrust bearing that sings or rattles as soon as you press the clutch pedal needs replacing. The tractor has to be split to reach it, so inspect the clutch plate and pressure plate on the same job. Reset the pedal play after fitting. With too little play the bearing turns all the time and the new one will soon be worn out too.

Ordering the right part

On an older tractor the type plate can be weathered, so clean it carefully to confirm you have a 90-90. For seals, bushes and bearings, measure the old part and compare the bore, outside size and width with the product details. Filters usually have a clearly printed reference number on the housing.

The rest of the 90 series

The 90 series came in several sizes, and each one has a page here with the parts that fit it:

For the rest of the brand, go to Fiat parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart