Menu
EUR

Linde H20 forklift parts & technical data

Seats and accessories, lighting and engine parts are some of the groups among the more than 80 parts for the Linde H20 forklift, diesel or LPG version.

84 parts found for Linde H20
Show:
GRANIT Feed pump 4 bores, hole spacing 25 x 45 mm, flange 27 mm
5%
GRANIT
Feed pump 4 bores, hole spacing 25 x 45 mm, flange 27 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 45 mm, ...
€37,09 €30,65 €35,20 €29,09
 
BOSCH Wiper blade left / center / right 600 mm, 24 inch
BOSCH
Wiper blade left / center / right 600 mm, 24 inch
Length: 600 mm. Length: 24 inches. Version: Left/centre/right. Part no.: N 63. R...
€27,95 €23,10
 
Shock absorber eye Ø 8 mm, housing Ø 24 mm, 195 - 290 mm John Deere
10%
Shock absorber eye Ø 8 mm, housing Ø 24 mm, 195 - 290 mm John Deere
Eye Ø: 8 mm. Housing Ø: 24 mm. Length min./max.: 195-290 mm. Stroke: 103 mm. Len...
€121,33 €100,27 €109,75 €90,70
 
Seat cushion fabric black, upper part 20 and 90 Jungheinrich
5%
Seat cushion fabric black, upper part 20 and 90 Jungheinrich
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, DS85/90, M...
€168,79 €139,50 €160,35 €132,52
 
HELLA Adaptor black mounting strip
HELLA
Adaptor black mounting strip
Version: This mounting strip can be supplemented with further intermediate piece...
€6,00 €4,96
 
Reflector round red Ø 61 mm, bonded
Reflector round red Ø 61 mm, bonded
Form: Round. Mounting type: Bonded. Colour: Red. Total Ø: 61 mm. Material: Plast...
€2,39 €1,98
 
GRAMMER Adjustment rail set operating lever right MSG85, MSG95
5%
GRAMMER
Adjustment rail set operating lever right MSG85, MSG95
Version: Adjustment rail set | Description: Operating lever right | To fit: MSG8...
€203,89 €168,50 €193,65 €160,04
 
GRAMMER Bush plastic seat MSG 83, MSG 85, MSG 93
GRAMMER
Bush plastic seat MSG 83, MSG 85, MSG 93
To fit: MSG 83, MSG 85, MSG 93 | Version: Bush | Description: Plastic
€1,24 €1,02
 
GRAMMER Yoke for suspension seat MSG 85, seat type DS 85
5%
GRAMMER
Yoke for suspension seat MSG 85, seat type DS 85
Seat type: DS 85 | Description: For suspension | To fit: MSG 85 | Version: Clevi...
€82,16 €67,90 €78,00 €64,46
 
GRAMMER Rocker spring travel 80 mm, MSG 75
5%
GRAMMER
Rocker spring travel 80 mm, MSG 75
Version: Rocker | Description: For suspension with 80 mm travel | To fit: MSG 75
€460,77 €380,80 €437,70 €361,74
 
GRAMMER Lap belt Duo-Sensitiv left 1280 mm, bovenzitgedeelte 511 - 531
5%
GRAMMER
Lap belt Duo-Sensitiv left 1280 mm, bovenzitgedeelte 511 - 531
To fit: MSG 65, MSG 75, MSG 83, MSG 93, | Sitzoberteil: 511, 521, 522, 531 | Lap...
€146,08 €120,73 €138,75 €114,67
 
GRAMMER Adjustment rail set Primo MSG 65, MSG 75
5%
GRAMMER
Adjustment rail set Primo MSG 65, MSG 75
Version: Adjustment rail set | Seat type: Primo | To fit: MSG 65, MSG 75
€180,17 €148,90 €171,15 €141,45
 
Air filter C13114/4
56%
Air filter C13114/4
€37,09 €30,65 €16,38 €13,54
 
MAHLE Gear reduction starter 12 V, 2,2 kW, 10 teeth, Ø 76,2 mm, anticlockwise
38%
MAHLE
Gear reduction starter 12 V, 2,2 kW, 10 teeth, Ø 76,2 mm, anticlockwise
€418,21 €345,63 €261,35 €215,99
 
Starter motor with reduction 12 V, 1,8 kW, 9 teeth, 223,5 mm
5%
Starter motor with reduction 12 V, 1,8 kW, 9 teeth, 223,5 mm
€170,59 €140,98 €162,00 €133,88
 
VICTOR REINZ Crankshaft seal rear Ø 133,3 x 158,7 x 12,7 mm
VICTOR REINZ
Crankshaft seal rear Ø 133,3 x 158,7 x 12,7 mm
€24,40 €20,17
 
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm.
€22,70 €18,76
 
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
5%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod ...
€46,86 €38,73 €44,50 €36,78
 
GRAMMER Seat belt lap belt ELR 22 mm, Maximo, Compacto W
5%
GRAMMER
Seat belt lap belt ELR 22 mm, Maximo, Compacto W
Lap belt (22 mm belt clip) with Duo Sensitiv function Retractor can only be fitt...
€203,64 €168,30 €193,45 €159,88
 
Clamp 35 - 50 mm, band width 12 mm, DIN 3017, galvanized steel
Clamp 35 - 50 mm, band width 12 mm, DIN 3017, galvanized steel
PP: 1 | Quality: W1 | Band width (mm): 12 | DIN: 3017 | Clamping range (mm): 35 ...
€3,10 €2,56
 
GRANIT Clamp 60 - 80 mm, band width 9 mm, DIN 3017, W1
GRANIT
Clamp 60 - 80 mm, band width 9 mm, DIN 3017, W1
Material: galvanised steel | Band width (mm): 9 | Clamping range (mm): 60 - 80 |...
€1,60 €1,32
 
Showing 49 - 72 of 84

Linde H20 parts for starting, charging and the operator seat

A forklift that will not start first thing in the morning holds up everything behind it. On the Linde H20, available with diesel or LPG drive, a lot of repair work therefore centres on the starter motor, the alternator and the start switch. More than 80 parts here fit this truck, made by GRANIT, GRAMMER, HELLA, MAHLE and FEBI.

Starter motor trouble

When the starter turns slowly or just clicks, measure battery voltage while cranking and look closely at the terminals. A corroded post or a loose earth strap can draw so much current that a healthy starter seems dead. Only once those are sorted is a new starter motor the sensible next step. For charging there are alternators, and the diesel version uses a glow start switch. If starting only fails with the key held in one particular position, the fault is usually inside that switch rather than the starter.

Seat cushions and slide rails

Drivers who spend a whole shift on an H20 soon notice a worn seat. There are seat cushions and back cushions in black PVC, plus an adjustment rail set that lets the seat slide forward and back smoothly again. A seat that no longer locks in its rails is a safety issue, because it moves under braking. Shock absorbers, mirrors, halogen bulbs, a hazard light switch symbol and wiper blades are on this page as well. Hold a new halogen bulb by its base only. Grease from your fingers bakes onto the hot glass, clouds it and shortens the life of the bulb considerably.

Air filtration and clamps

  • Main air filter elements
  • Safety cartridges that sit inside the main filter
  • Hose clamps for intake and coolant hoses
  • A crankshaft seal

Never blow out a safety cartridge. Its job is to protect the engine if the outer element fails, and it can only do that when undamaged. Renew it every second or third time the main element is changed. Check the clamps on the intake hose at every filter service too, because air that sneaks past a loose clamp reaches the engine unfiltered.

Matching parts to your truck

The data plate on the forklift confirms it is an H20 and shows which drive it has. Compare any number on the old part, such as on the starter or air filter, with the reference number listed with the product. For cushions, the upper part of the seat they fit onto is what matters.

If you run other forklifts of this make, each model with its own page is collected under Linde parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart