Menu
EUR

Linde H20 forklift parts & technical data

Seats and accessories, lighting and engine parts are some of the groups among the more than 80 parts for the Linde H20 forklift, diesel or LPG version.

84 parts found for Linde H20
Show:
Clamp 12 - 22 mm, band width 9 mm, DIN 3017, W1
Clamp 12 - 22 mm, band width 9 mm, DIN 3017, W1
Clamping range (mm): 12 - 22 | Menke no.: 26102 | PP: 1 | DIN: 3017 | Band width...
€0,91 €0,75
 
FEBI Air filter C13114/4
56%
FEBI
Air filter C13114/4
€37,09 €30,65 €16,38 €13,54
 
GRANIT Back cushion PVC, black, upper part 20 and 90
GRANIT
Back cushion PVC, black, upper part 20 and 90
To fit: DS83/20, DS83/90, DS85/20, DS85/90, MSG83/20, MSG85/20, MSG95A/20. Uphol...
€143,00 €118,18
 
GRANIT Back cushion fabric, black, upper part 20 and 90
GRANIT
Back cushion fabric, black, upper part 20 and 90
Colour: Black. To fit: Upper part 20 and 90. Upholstery type: Fabric.
€150,00 €123,97
 
HELLA Cover for switch mounting holes mounting strip
HELLA
Cover for switch mounting holes mounting strip
Additional information: - for closing intended switch installation openings in t...
€5,45 €4,50
 
HELLA Lens, left / right - 2 pieces
HELLA
Lens, left / right - 2 pieces
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399
€31,92 €26,38
 
GRANIT Clamp 110 - 130 mm, band width 12 mm, DIN 3017, galvanized steel
GRANIT
Clamp 110 - 130 mm, band width 12 mm, DIN 3017, galvanized steel
PP: 1 | Band width (mm): 12 | Clamping range (mm): 110 - 130 | Quality: W1 | For...
€1,95 €1,61
 
Clamp 20 - 32 mm, band width 9 mm, DIN 3017, W1
Clamp 20 - 32 mm, band width 9 mm, DIN 3017, W1
Clamping range (mm): 20 - 32 | Quality: W1 | PP: 1 | Form: 6 | Band width (mm): ...
€1,12 €0,93
 
Water pump Landini, Linde, McCormick
5%
Water pump Landini, Linde, McCormick
€112,63 €93,08 €106,95 €88,39
 
GRAMMER Tractor seat Maximo M MSG85/721 Still
5%
GRAMMER
Tractor seat Maximo M MSG85/721 Still
Seat type: MSG85/721. Suspension: Mechanical. Upholstery type: Fabric. Seat cont...
€1.366,09 €1.129,00 €1.297,75 €1.072,52
 
GRANIT Seat cushion PVC, black, upper part 20 and 90
5%
GRANIT
Seat cushion PVC, black, upper part 20 and 90
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, DS85/90, M...
€162,13 €133,99 €154,00 €127,27
 
Showing 73 - 84 of 84

Linde H20 parts for starting, charging and the operator seat

A forklift that will not start first thing in the morning holds up everything behind it. On the Linde H20, available with diesel or LPG drive, a lot of repair work therefore centres on the starter motor, the alternator and the start switch. More than 80 parts here fit this truck, made by GRANIT, GRAMMER, HELLA, MAHLE and FEBI.

Starter motor trouble

When the starter turns slowly or just clicks, measure battery voltage while cranking and look closely at the terminals. A corroded post or a loose earth strap can draw so much current that a healthy starter seems dead. Only once those are sorted is a new starter motor the sensible next step. For charging there are alternators, and the diesel version uses a glow start switch. If starting only fails with the key held in one particular position, the fault is usually inside that switch rather than the starter.

Seat cushions and slide rails

Drivers who spend a whole shift on an H20 soon notice a worn seat. There are seat cushions and back cushions in black PVC, plus an adjustment rail set that lets the seat slide forward and back smoothly again. A seat that no longer locks in its rails is a safety issue, because it moves under braking. Shock absorbers, mirrors, halogen bulbs, a hazard light switch symbol and wiper blades are on this page as well. Hold a new halogen bulb by its base only. Grease from your fingers bakes onto the hot glass, clouds it and shortens the life of the bulb considerably.

Air filtration and clamps

  • Main air filter elements
  • Safety cartridges that sit inside the main filter
  • Hose clamps for intake and coolant hoses
  • A crankshaft seal

Never blow out a safety cartridge. Its job is to protect the engine if the outer element fails, and it can only do that when undamaged. Renew it every second or third time the main element is changed. Check the clamps on the intake hose at every filter service too, because air that sneaks past a loose clamp reaches the engine unfiltered.

Matching parts to your truck

The data plate on the forklift confirms it is an H20 and shows which drive it has. Compare any number on the old part, such as on the starter or air filter, with the reference number listed with the product. For cushions, the upper part of the seat they fit onto is what matters.

If you run other forklifts of this make, each model with its own page is collected under Linde parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart