Menu
EUR

Linde H25 forklift parts & technical data

More than 70 parts for the Linde H25 forklift, suitable for the diesel or LPG version. The selection includes lighting, seats and accessories and engine parts.

71 parts found for Linde H25
Show:
GRAMMER Shock absorber seat 125 - 170 mm, Ø 24 mm, eye Ø 12 mm MSG 65, MSG 75
GRAMMER
Sitzoberteil: 511, 521, 522, 531, 721, 731 | Seat type: Primo, Primo EL Plus, Primo Evolution, Primo L, Primo M, Primo Professional M, Primo Professio... More
Sitzoberteil: 511, 521, 522, 531, 721, 731 | Seat type: Primo, Primo E...
€74,54 €61,60 €70,80 €58,51
You save 5%
GRAMMER Seat cushion 530 mm fabric black 731
GRAMMER
Version: Seat cushion | Upholstery type: Fabric | Description: With cut-out for seat depth tilt adjustment With 12V / 24V heater | Width (mm): 530 | C... More
Version: Seat cushion | Upholstery type: Fabric | Description: With cu...
€318,83 €263,50 €302,85 €250,29
You save 5%
METARO Mechanically suspended forklift seat PVC with seat belt - Linde serie H12, H16, H18, H20, H25, H30
METARO
Mechanically suspended forklift seat for small forklifts with PVC upholstery and integrated seat belt system. Compact design with 60 mm suspension tra... More
Mechanically suspended forklift seat for small forklifts with PVC upho...
€958,25 €791,94 €574,95 €475,17
You save 40%
GRAMMER Back cushion PVC, black, upper part 721-741
GRAMMER
Colour: black. To fit: Backrest cushion suitable for seats with 721 seat top section. Upholstery type: PVC. Description: 721/731 top part. Info: Inclu... More
Colour: black. To fit: Backrest cushion suitable for seats with 721 se...
€197,33 €163,08 €178,50 €147,52
You save 10%
HELLA Symbol switch work lamp for green
HELLA
Version: Green, front work light. Colour: grün. To fit: HELLA Schalter Serien 4570 und 7832. Symbol: Arbeitsscheinwerfer vorn. More
Version: Green, front work light. Colour: grün. To fit: HELLA Schalte...
€3,40 €2,81
GRANIT Work lamp spotlight H3 70 W, 12 / 24 V, 100 x 91 mm, upright
GRANIT
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x 91 mm. Light function: Far-reaching illumination. Connection: AMP plug. Bulb: 12... More
Nominal voltage: 12 / 24 V. Form: Square. Dimensions W x H x D: 100 x ...
€51,14 €42,26 €46,25 €38,22
You save 10%
HELLA Headlight left / right with indicator light 12 V, H3, H7, P21W, T4W
HELLA
Bulb: 12V55W/H3, 12V55W/H7, 12V21WK/P21W, 12V4WK/T4W. Colour: Yellow. Connection: AMP plug connection. Fixing: Vertical. Installation location: Left, ... More
Bulb: 12V55W/H3, 12V55W/H7, 12V21WK/P21W, 12V4WK/T4W. Colour: Yellow. ...
€208,95 €172,69 €159,95 €132,19
You save 23%
GRANIT Horn 12 V with bracket, Ø 97 mm, blade terminal 2 x 6,3 mm
GRANIT
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270, 275, 283, 290, 298, 340, 342, 350, 352, 355, 360, 362, 365, 375, 383, 390, 393... More
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270...
€23,70 €19,59
GRANIT Start switch K80 12 - 24 V, built-in-Ø 22 mm, 10 plugs
GRANIT
Version: 12 V/24 V, with 2 moulded keys, circuit: P, 0, 1, 2, 3, connection: blade terminal. Connection: 10x cable lug 6.3 mm. Mounting Ø: 22 mm. Tot... More
Version: 12 V/24 V, with 2 moulded keys, circuit: P, 0, 1, 2, 3, conne...
€55,85 €46,16 €53,00 €43,80
You save 5%
GRANIT Blade fuse Maxi 32 V, 30 A, green - 1 piece
GRANIT
Type: Maxi. Voltage: 32 V. Nominal current: 30 A. Colour: Green. Width: 29,7 mm. Height: 33,9 mm. Contents: 1x 30A. Depth: 9,1 mm. More
Type: Maxi. Voltage: 32 V. Nominal current: 30 A. Colour: Green. Width...
€3,73 €3,08
GRANIT Fuel filter connection 2x straight 6/8 mm, height 105 mm, Ø 35 mm
GRANIT
Version: suitable for WK 31/2. Connection: 2 x 6/8 mm. Length: 105 mm. More
Version: suitable for WK 31/2. Connection: 2 x 6/8 mm. Length: 105 mm.
€3,76 €3,11
GRANIT Clamp 10 - 16 mm, band width 9 mm, DIN 3017, W1
GRANIT
DIN: 3017 | Clamping range (mm): 10 - 16 | PP: 1 | Material: galvanised steel | Menke no.: 26101 | Form: 6 | Quality: W1 | Band width (mm): 9 More
DIN: 3017 | Clamping range (mm): 10 - 16 | PP: 1 | Material: galvanise...
€0,72 €0,60
GRAMMER Roller seat outer-Ø 22 mm, inner-Ø 12 mm, thickness 16,5 mm MSG 83-93
GRAMMER
Version: Roller | Description: Outer Ø: 22 mm Inner Ø: 12 mm Thickness: 16.5 mm | To fit: MSG 83, MSG 85, MSG 93 More
Version: Roller | Description: Outer Ø: 22 mm Inner Ø: 12 mm Thickne...
€1,82 €1,50
MANN-FILTER Ventilation filter G 3/4", Ø 80 mm, height 73,5 mm, 0,2 m³/min
MANN-FILTER
Nominal flow rate approx.: 0,2 m³/min. Opening pressure: 0,85 bar. d1: G 3/4" mm. d2: 80 mm. H: 73,5 mm. MANN no.: 4500362900. More
Nominal flow rate approx.: 0,2 m³/min. Opening pressure: 0,85 bar. d1...
€82,76 €68,40 €51,70 €42,73
You save 38%
GRANIT Feed pump 4 bores, hole spacing 25 x 45 mm, flange 27 mm
GRANIT
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 27 mm. More
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacin...
€37,09 €30,65 €35,20 €29,09
You save 5%
BOSCH Wiper blade left / center / right 600 mm, 24 inch
BOSCH
Length: 600 mm. Length: 24 inches. Version: Left/centre/right. Part no.: N 63. Reference no.: 3397018966. OEM no.: 3397018966. More
Length: 600 mm. Length: 24 inches. Version: Left/centre/right. Part no...
€27,95 €23,10
Shock absorber eye Ø 8 mm, housing Ø 24 mm, 195 - 290 mm John Deere
Eye Ø: 8 mm. Housing Ø: 24 mm. Length min./max.: 195-290 mm. Stroke: 103 mm. Length: 290.5 mm. Newtons: 65. Cylinder Ø: 22 mm. Piston rod Ø: 8 mm.... More
Eye Ø: 8 mm. Housing Ø: 24 mm. Length min./max.: 195-290 mm. Stroke:...
€121,33 €100,27 €109,75 €90,70
You save 10%
Seat cushion fabric black, upper part 20 and 90 Jungheinrich
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, DS85/90, MSG83/20, MSG85/20, MSG95A/20. Upholstery type: Fabric. Description: 90... More
Description: Upper part 20 and 90. To fit: DS83/20, DS83/90, DS85/20, ...
€168,79 €139,50 €160,35 €132,52
You save 5%
HELLA Adaptor black mounting strip
HELLA
Version: This mounting strip can be supplemented with further intermediate pieces as required. Installation location: mitte. More
Version: This mounting strip can be supplemented with further intermed...
€6,00 €4,96
Reflector round red Ø 61 mm, bonded
Form: Round. Mounting type: Bonded. Colour: Red. Total Ø: 61 mm. Material: Plastic. Test mark: ECE. More
Form: Round. Mounting type: Bonded. Colour: Red. Total Ø: 61 mm. Mate...
€2,39 €1,98
GRAMMER Bush plastic seat MSG 83, MSG 85, MSG 93
GRAMMER
To fit: MSG 83, MSG 85, MSG 93 | Version: Bush | Description: Plastic More
To fit: MSG 83, MSG 85, MSG 93 | Version: Bush | Description: Plastic
€1,24 €1,02
GRAMMER Yoke for suspension seat MSG 85, seat type DS 85
GRAMMER
Seat type: DS 85 | Description: For suspension | To fit: MSG 85 | Version: Clevis More
Seat type: DS 85 | Description: For suspension | To fit: MSG 85 | Vers...
€82,16 €67,90 €78,00 €64,46
You save 5%
Showing 25 - 48 of 71

Linde H25 parts for servicing and wear items

How long a forklift engine lasts is decided at service time. For the Linde H25 with diesel or LPG drive there are more than 70 matching parts from GRANIT, GRAMMER, HELLA, FEBI and Stabilus, and many of them belong on the bench at every routine service.

What to have ready for a service

For a full service on an H25, lay out an air filter, a safety cartridge and, on the diesel, a fuel filter. Add a few hose clamps, because a clamp that has seen years of heat often snaps just as you undo it. After fitting a new fuel filter to a diesel engine, the system has to be bled. Keep pumping until fuel without bubbles comes from the bleed screw, otherwise the engine will run rough or stall.

The safety cartridge sits inside the main filter and is never cleaned with air. If you see dust on the clean side of the outer element, renew the cartridge as well.

Cutting rings for leak-tight hydraulic lines

When a hydraulic line weeps at a fitting, a new cutting ring is often the cure. Always use a fresh ring when remaking a joint. A used cutting ring has already bitten into the pipe and rarely seals a second time. Do not overtighten the nut, as that deforms the pipe and the leak stays. A crankshaft seal is available too.

Seat, cab and electrics

  • Seat and back cushions in black PVC from GRAMMER
  • Gas struts from Stabilus
  • Shock absorbers
  • Mirrors and wiper blades
  • Halogen bulbs, a start switch and a hazard light symbol

A gas strut that is losing pressure lets a hatch or cover drop when you least expect it. Replace it as soon as it no longer holds up on its own. When fitting a crankshaft seal, check which way the lip faces and press it in squarely with a suitable drift. A seal that sits crooked or whose lip folds over will leak again after a few hours of running.

A parts list for your H25

This page works as a parts list for the H25, showing everything that fits this truck in one place. Before ordering, read the data plate to confirm the model and whether it runs on diesel or LPG. Filters nearly always carry a number on the old element. Hold it against the reference number given with the product and you know it will fit.

Other forklifts of the make each have a page of their own, all reachable through Linde parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart