Lighting for the Massey Ferguson 1200 is one of the groups on this page, which lists more than 90 parts that fit this 1000 series tractor.
The Massey Ferguson 1200 is an articulated tractor from the 1000 series, and owners tend to do much of the spanner work themselves. This page is put together for exactly that. It holds more than 90 Massey Ferguson 1200 parts, with plenty of seals, gaskets and bearings for the day the engine, the clutch or the hydraulic lift has to come apart.
On the fuel side there are copper sealing rings for the injection nozzles. You will also find cylinder head bolts, heating elements and engine oil filters. A rule worth sticking to: whenever an injector comes out of the head, it goes back with a new copper ring. The old one has been crushed flat and rarely seals properly a second time, which leads to lost compression and a sooted nozzle. Cylinder head bolts are tightened in the specified sequence and in stages, as the workshop manual describes.
For the lighting there are headlight inserts for the left and right side. Replace an insert once the reflector has gone dull, the glass is cracked or moisture sits behind it, and order the correct side, as each insert is made for one side only. In the cab, an air suspended GRAMMER seat from the Primo line can replace a worn out one. The remaining parts come from GRANIT, Eaton, Perkins and LUK.
Check the type plate to make sure it reads 1200 and keep a note of it for future orders. Many parts here are seals and gaskets, so the old piece is your best reference. A gasket or bolt sometimes carries a reference number, and if not, measure the old seal and compare it with the details on this page. Keep old gaskets until the new part is on the bench.
Every other tractor from the brand, from the smaller ranges to the later models, is listed under Massey Ferguson parts, which is the place to go for the rest of your fleet.
