Menu
EUR

Massey Ferguson 185 tractor parts & technical data

Keep your Massey Ferguson 185 working with more than 350 matching parts. Vintage parts, lighting and electrics for the 100 series are gathered on one page.

399 parts found for Massey Ferguson 185
Show:
GRANIT Needle bearing reversing clutch input shaft Ø 41,3 x 31,75 x 19,05 mm
GRANIT
Dimensions: 31,75 x 41,3 x 19,05 mm. Outer Ø: 41,3 mm. Inner Ø: 31.75 mm. Height 1: 19.05 mm. More
Dimensions: 31,75 x 41,3 x 19,05 mm. Outer Ø: 41,3 mm. Inner Ø: 31.7...
€30,20 €24,96
Perkins Sealing ring crankshaft rear Ø 130 x 159 x 11 mm
€84,05 €69,46 €78,75 €65,08
You save 6%
GRANIT Installation cable mini-contact plug 1 m
GRANIT
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510. More
Length: 1 m. Technical data: Closure: 1.0 m. Reference no.: 1762510.
€163,94 €135,49 €155,70 €128,68
You save 5%
KS Piston ring set 4 rings, Ø 101,05 mm, 2,385/2,385/2,385/6,335 mm
€69,64 €57,55 €66,15 €54,67
You save 5%
KS Piston ring set 5 rings, Ø 94,48 mm, 2,39/2,39/2,39/6,34/6,34 mm
KS
Dimensions: 5 rings, Ø 94.48 mm  2.39 mm / 2.39 mm / 2.39 mm / 6.34 mm / 6.34 mm. More
Dimensions: 5 rings, Ø 94.48 mm  2.39 mm / 2.39 mm / 2.39 mm / 6...
€44,65 €36,90 €42,40 €35,04
You save 5%
VICTOR REINZ Oil sump gasket Massey Ferguson 168-6255
Cylinder head bolt 1/2" x 124 mm Massey Ferguson, Perkins
Dimensions: 1/2" x 124 mm. More
Dimensions: 1/2" x 124 mm.
€67,85 €56,07
Feed pump 4 hole, hole spacing 25/45 mm, flange up to lever 34 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 45 mm, Flange to lever end: 34 mm. More
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacin...
€27,75 €22,93
Ring piston 77,6 x 84,4 x 2,3 mm Massey Ferguson 133-560 - 3 pieces
Dimensions: 77.6 x 84.4 x 2.3 mm. More
Dimensions: 77.6 x 84.4 x 2.3 mm.
€18,30 €15,12
GRANIT Yoke 335 mm, yoke inner 50 mm, bore 16 mm Massey Ferguson
GRANIT
Hole: 16 mm. Length: 335 mm. Fork inner width: 50 mm. More
Hole: 16 mm. Length: 335 mm. Fork inner width: 50 mm.
€48,79 €40,32 €46,35 €38,31
You save 5%
GRANIT Yoke 14-1/8" x 1" x 3/4", length 395 mm Massey Ferguson
GRANIT
Dimensions: 14 1/8" x 1" x 3/4" mm. Hole: 19 mm. Length: 395 mm. Fork inner width: 50 mm. More
Dimensions: 14 1/8" x 1" x 3/4" mm. Hole: 19 mm. Length: 395 mm. Fork ...
€43,38 €35,85 €41,20 €34,05
You save 5%
GRANIT Replacement button with symbols for light switch
GRANIT
Version: For light switch. More
Version: For light switch.
€12,85 €10,62
GRANIT Start switch 12 V, Ø 15,5 mm - 1 key
GRANIT
Version: 12 V, with blade terminal, 0: off, 1: preheat, 2: start, Installation dimension: Ø 15.5 mm / 3 mm, Winter start, to the left, Summer start, ... More
Version: 12 V, with blade terminal, 0: off, 1: preheat, 2: start, Inst...
€33,46 €27,65 €31,75 €26,24
You save 5%
Showing 241 - 264 of 399

Massey Ferguson 185 parts

Keeping an MF 185 working comes down to the basics: cooling, clutch, exhaust and seals. This page lists more than 350 replacement tractor parts for the Massey Ferguson 185, made by GRANIT and by brands such as LUK, Eaton, Cobo and KS.

How to identify the right part

The type plate confirms you have a 185. On a tractor that has been modified over the years, the old part is often a more reliable guide than the plate. Look for a reference number on seals, gaskets and the starter motor. With a starter motor, also count the pinion teeth and measure the hole spacing on the flange so the new unit lines up with the clutch housing.

Clutch work on the 185

For the clutch there are double clutch assemblies and clutch plates. If you are splitting the tractor anyway, do everything that wears in one go. Along with the double clutch and plate, fit a new release bearing and inspect the flywheel for scoring and blue heat marks. A new plate on a damaged flywheel will soon start slipping again. Before ordering, count the splines on the shaft and measure the hub of your old plate, because that is where clutch plates differ.

Cooling, exhaust and engine

Around the engine there are water pumps with their gaskets, radiator hoses including the top hose, a feed pump, an exhaust manifold, silencers and starter motors. Never fit a new water pump without a new gasket, and clean the mating face on the block thoroughly. Leftover gasket material is the usual reason a freshly fitted pump starts dripping again.

Seals, bearings and lighting

You will also find sealing rings for the front axle, seals for the lift arm shaft, O-rings and wheel bearings, plus headlight inserts and rear lights.

Replace wheel bearings as a set per wheel, inner and outer together, always with a new sealing ring. Press the outer races in square, use clean grease, then adjust so the wheel turns freely but shows no play when you rock it top and bottom. A front axle sealing ring reused during this job will often start leaking within a season.

More from the 100 series

If you also run another tractor from the same range, see the pages for the Massey Ferguson 148, Massey Ferguson 152, Massey Ferguson 175, Massey Ferguson 178 or Massey Ferguson 188. Each of those pages shows the parts listed for that model. The full overview is under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart