Menu
EUR

Massey Ferguson 3635 tractor parts & technical data

For the Massey Ferguson 3635 from the 3600 series, choose from more than 350 items here. Lighting, trailer couplings and steering are well covered.

379 parts found for Massey Ferguson 3635
Show:
LED main headlight 12/24 V, 168 x 107 x 81,5 mm, H4
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection: H4 | Power consumption (W): 55 | Light colour (K): 6000 | Housing material: Al... More
Voltage range (V): 10 - 30 | Nominal voltage (V): 12 / 24 | Connection...
€119,54 €98,79 €113,55 €93,84
You save 5%
FEBI Engine oil filter Ø 93 mm, height 177 mm, thread 3/4"-16 UNF
€19,80 €16,36 €12,18 €10,07
You save 38%
FEBI Engine oil filter Ø 93 mm, height 177 mm, thread 3/4"-16 UNF
€26,68 €22,05 €8,08 €6,68
You save 70%
GRANIT Cardan shaft bearing 38 x 80 x 49 mm Massey Ferguson 3635-8280
€137,31 €113,48 €130,40 €107,77
You save 5%
GRANIT Seal kit hydraulic steering Massey Ferguson Series 3100-8160
€94,40 €78,02 €89,65 €74,09
You save 5%
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm. More
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
Radiator Massey Ferguson 3615-3650, 3625-3645
To fit as: Massey Ferguson Serie 3000, 3640, Serie 3600 (3615, 3630, 3650), Serie 3600 (2nd generation) (3625, 3635, 3640, 3645). More
To fit as: Massey Ferguson Serie 3000, 3640, Serie 3600 (3615, 3630, 3...
€675,28 €558,08 €641,50 €530,17
You save 5%
Radiator cap Ø 58 mm, height 26 mm, 0,5 bar
Neck Ø: 58 mm. Height: 26 mm. Opening pressure: 0,5 bar. More
Neck Ø: 58 mm. Height: 26 mm. Opening pressure: 0,5 bar.
€12,65 €10,45
Force sensor pin 60 kN Massey Ferguson
€395,80 €327,11 €376,00 €310,74
You save 5%
Scharmüller Top drawbar rail 330 mm, pin Ø 25 mm, coupling pin 31 mm
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.108,13 €915,81 €933,36 €771,37
You save 16%
Scharmüller Adaptor plate height adjustable 330 mm, hole pattern 140 x 80 mm
Scharmüller
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 140 x 80 mm. Guide width: 32 mm. Plate height: 150 mm. Thread: M20. Colour... More
Load capacity: 3000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
€704,78 €582,46 €623,25 €515,08
You save 12%
HELLA Oil pressure switch engine open function (NO) 1/8 inch NPT, 0,4 - 0,6 bar
HELLA
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: black. Pressure range: 0,4 - 0,6 bar. Thread: ... More
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade te...
€10,75 €8,88
Replacement key blank
Version: To fit: Ford, David Brown, Massey Ferguson. To fit: Types:, Case IH 385, 395, 454, 474, 475, 484, 485, 495, 574, 584, 585, 595, 674, 684, 685... More
Version: To fit: Ford, David Brown, Massey Ferguson. To fit: Types:, C...
€3,16 €2,61
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
GRANIT Sensor 1-pin, 1/8 inch NPT conical
GRANIT
Version: 1-pin. Thread: 1/8” NPT, tapered. More
Version: 1-pin. Thread: 1/8” NPT, tapered.
€10,95 €9,05
Alternator 14 V / 70 A, form A, flange 80,5 mm
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguson More
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguso...
€194,16 €160,46 €175,65 €145,17
You save 10%
LUK Clutch kit without release bearing Landini, Massey Ferguson
LUK
Supplementary set: Without release bearing | Contents: Pressure plate 458135022110, clutch plate 458335015010 More
Supplementary set: Without release bearing | Contents: Pressure plate ...
€1.159,05 €957,89 €1.048,65 €866,65
You save 10%
Scharmüller Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Scharmüller
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour: Schwarz | Guide width (mm): 32 | D-value (kN): 112 | Dc-value (kN): 106 | V-val... More
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour:...
€1.287,16 €1.063,77
PROBOSS Seat air suspended AS3520 520 mm, 12 V Massey Ferguson
PROBOSS
Seat width (mm): 520 | Restraint system: Optional | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control... More
Seat width (mm): 520 | Restraint system: Optional | Included in delive...
€1.577,80 €1.303,97
GRANIT Central axle washer drive shaft Massey Ferguson 5425-6455
€46,62 €38,53 €44,25 €36,57
You save 5%
GRANIT Repair set brake cylinder Massey Ferguson, Case IH
€36,41 €30,09 €34,55 €28,55
You save 5%
GRANIT Threaded adaptor outer-Ø conical 1 1/4 inch, female thread 3/4 inch
€34,36 €28,40 €32,60 €26,94
You save 5%
Radiator cap Ø 58 mm, height 25 mm, 0,7 bar
Neck Ø: 58 mm. Height: 25 mm. Opening pressure: 0,7 bar. More
Neck Ø: 58 mm. Height: 25 mm. Opening pressure: 0,7 bar.
€9,45 €7,81
Showing 49 - 72 of 379

Massey Ferguson 3635 parts by system

More than 350 parts on this page fit the Massey Ferguson 3635, with brands including GRANIT, HELLA, GRAMMER, Cobo and Scharmüller. Rather than one long list, here is how they break down by system, so you can go straight to the job in front of you.

Charging and belts

Alternators for the charging circuit and a V-belt for the air conditioning cover the front of the engine. If the battery light flickers at idle, check belt tension and the earth strap before you condemn the alternator. A slipping belt or a poor earth can produce the same symptom.

Engine sealing and cooling

Thermostats with matching gaskets, cylinder head bolts, seals for the fuel tank sensor and O-rings, for example for the feed pump, deal with leaks and temperature problems. Bushes and sealing rings round off this group. If the cylinder head has been off, use new head bolts. They are normally stretch bolts, so a used one no longer delivers the same clamping force. Tighten them in the specified sequence and in stages.

Cab, seat and controls

For the driving position there are tractor seats and separate seat units, push button switches such as the one for engaging four wheel drive, and gas struts for the door. A sealing ring for the rear window lock stops it from rattling. Fit gas struts with the rod pointing down so the internal seal stays lubricated, and replace them in pairs where two support the same door or window.

Rear and fuel

Drawbars for the rear and a lockable tank cap complete the picture. The lockable cap is a small thing that pays for itself when the tractor is left at the edge of a field overnight. Before ordering a drawbar, measure the rail width and the pin on the one you have, so the new part drops into the existing mounting. With a seat, check the mounting points underneath against the console in your cab.

Finding the right Massey Ferguson 3635 part

Start with the rating plate to confirm the exact type. The 3635 belongs to the Massey Ferguson 3600 series, and two other types from it have their own pages: the Massey Ferguson 3645 and the Massey Ferguson 3640. Even so, always order for the type you actually run. The quickest route is the reference number on the old part, for instance on the alternator housing or under the seat. Everything else from this make is on the Massey Ferguson parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart