Three-point linkage parts, trailer couplings and electrics for the Massey Ferguson 3640 are collected here: more than 90 parts for this 3600 series tractor.
Valves that no longer seat properly, a weeping crankshaft seal or a thermostat that sticks: on a Massey Ferguson 3640 with a lot of hours, the engine eventually needs work. This page has more than 90 replacement parts for the type, from GRANIT, ROCKINGER, Scharmüller, Cobo and BOSCH.
For an overhaul there are inlet valves, outlet valves, connecting rod bearings and a crankshaft seal. On the fuel side you will find injection lines, feed pump seals, sealing rings for the fuel line and a pressure switch for the fuel filter head. Cooling is covered by thermostats with matching gaskets and seals for the water circuit.
Always fit a fresh gasket with a new thermostat, even if the old one looks fine, because a flattened gasket starts dripping on the first warm day. Before fitting, hang the new thermostat in a pan of water and heat it slowly. That way you see with your own eyes that it opens before it disappears into the housing. Never bend injection lines to make them fit. A kinked or tightly bent line narrows the bore, and you notice that as a cylinder that lags behind the rest.
For work behind the tractor there are drawbars and trailer couplings from ROCKINGER and Scharmüller, Piton Fix parts and hydraulic top links. For trailers with forced steering you will find, among other things, a welded rod with a lock. Check the drawbar pin and the hole in the towing eye regularly. Once the pin has worn oval, replace it before play builds up in the drawbar and the wear spreads.
A hydraulic top link has the same enemy as any cylinder, which is dirt on the piston rod. Do not leave the rod extended longer than needed, and wipe it clean before retracting it. That keeps the seal intact and stops the top link from leaking. Check that the hose couplings are clean before connecting them, and fit a dust cap whenever the top link is off the tractor.
The type plate tells you if you are really looking at a 3640. Engine parts often carry a reference number stamped by the manufacturer, and for bearings and valves that is the surest way to compare. In the Massey Ferguson line-up, the 3640 sits in the 3600 series. The Massey Ferguson 3635 and Massey Ferguson 3645 come from the same series and each have their own page, so you can see per tractor what fits. All other models from the brand are under Massey Ferguson parts.