Menu
EUR

Massey Ferguson 3690 tractor parts & technical data

Steering and front axle parts, lighting or a trailer coupling for the Massey Ferguson 3690? This 3600 series tractor has more than 250 parts listed here.

271 parts found for Massey Ferguson 3690
Show:
Gas strut roof window 200 N, 215 mm
Newtons: 200. A: 215 mm. B: 105 mm. C: 6 mm. D: 8 mm. To fit: roof hatch. Form: 8. More
Newtons: 200. A: 215 mm. B: 105 mm. C: 6 mm. D: 8 mm. To fit: roof hat...
€32,35 €26,74
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.664,08 €1.375,27 €1.315,63 €1.087,30
You save 21%
HELLA Lens, left and right, indicator, brake light, rear light - 2 pieces
HELLA
Installation location: Left. Test mark: E12 3021 / E12 6077 / E12 7103. Light function: With indicator light/with brake light/with tail light. More
Installation location: Left. Test mark: E12 3021 / E12 6077 / E12 7103...
€33,15 €27,40
HELLA Relays relays make contact 12 V / 50 A, 4-pin, with holder
HELLA
Version: • With resistor for suppressing inductive interference voltage peaks. Colour: Black. Power rating max. 12 V: 50. Protection class: 54. Swit... More
Version: • With resistor for suppressing inductive interference volt...
€20,91 €17,28
Cobo Lens indicator/position light left / right
Cobo
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborghini, Landini, Massey Ferguson, Mc Cormick, Renault, Same More
To fit as: Case IH, Deutz-Fahr, Fiat, Hürlimann, John Deere, Lamborgh...
€14,73 €12,17
Cobo Indicator/position light left / right 120 x 80 x 56 mm, P21W, R5W
Cobo
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90 F/S, AgroPrima 4.31, 4.51, 4.56, 6.06, 6.16, AgroXtra 3.57, 4.07, 4.17, 4, 47, ... More
To fit as: Deutz-Fahr AgroCompact 3.30 F/V, 3.50 V/F/S, 3.70 F/V, 3.90...
€37,21 €30,75
Ball joint 200 mm, taper 27 - 30 mm, M24 x 1,5 / M24 x 1,5
A: 200 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 27 mm. F: 30 mm. Taper: 27 - 30 mm. More
A: 200 mm. C: M24 x 1,5 mm. D: M24 x 1,5 mm. E: 27 mm. F: 30 mm. Taper...
€88,45 €73,10 €81,37 €67,25
You save 8%
Brake disc foot brake outer-Ø 135,5 mm, inner-Ø 44 mm, thickness 3,3 mm
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.088,39 €899,50 €838,59 €693,05
You save 23%
V-belt for air conditioning Massey Ferguson 3075-8280
Version: For air conditioning. More
Version: For air conditioning.
€12,28 €10,14
V-belt set AV 13 x 1600 mm Massey Ferguson, Deutz-Fahr
Dimensions: AV 13 x 1600 mm. More
Dimensions: AV 13 x 1600 mm.
€34,14 €28,21
Optibelt V-belt air conditioning Fendt, Massey Ferguson, Case IH, Steyr, New Holland
Optibelt
Description: For air conditioning system. More
Description: For air conditioning system.
€24,46 €20,22
Turbocharger mounting kit Massey Ferguson 31-38, Series 400-8110
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil inlet gasket, 1x oil outlet gasket, 6x copper-plated nuts, 4x copper-plated nuts, ... More
Contents: 1x turbine inlet gasket, 1x turbine outlet gasket, 1x oil in...
€125,78 €103,95 €115,72 €95,63
You save 8%
Injection nozzle engine 620DSL, 612DS Valtra, Massey Ferguson
€224,74 €185,74 €206,76 €170,88
You save 8%
Injection nozzle Case IH CS 110-150
Type formula: DLLA150S620. More
Type formula: DLLA150S620.
€91,16 €75,34 €83,87 €69,31
You save 8%
Connecting rod bolt 85 mm Valtra-Valmet, Case IH, Steyr
Dimensions: 85 mm long. More
Dimensions: 85 mm long.
€42,51 €35,13 €39,11 €32,32
You save 8%
Hydraulic pump Massey Ferguson 2620-8160
Menke no.: 95146. More
Menke no.: 95146.
€968,09 €800,07 €890,64 €736,07
You save 8%
Gas strut roof window 180 N, 215 mm, stroke 70 mm Massey Ferguson
suitable for: Dachluke. Newtons: 180. A: 215 mm. B: 105 mm. C: 6 mm. D: 8 mm. Form: 8. d1: 8 mm. d2: 18 mm. Stroke: 70 mm. To fit: Roof hatch. More
suitable for: Dachluke. Newtons: 180. A: 215 mm. B: 105 mm. C: 6 mm. D...
€36,16 €29,89
Gas strut rear window 150 N, 785 mm, stroke 350 mm Massey Ferguson
suitable for: Heckscheibe. Newtons: 150. A: 785 mm. B: 400 mm. C: 8 mm. D: 8 mm. Form: 2. d1: 10 mm. d2: 22 mm. Stroke: 350 mm. To fit: Rear screen. More
suitable for: Heckscheibe. Newtons: 150. A: 785 mm. B: 400 mm. C: 8 mm...
€33,75 €27,89
Gas strut door 300 N, 255 mm, stroke 80 mm Massey Ferguson
suitable for: Tür. Newtons: 300. A: 255 mm. B: 125 mm. C: 10 mm. D: 10 mm. Form: 6. d1: 8 mm. d2: 18 mm. Stroke: 80 mm. To fit: Door. More
suitable for: Tür. Newtons: 300. A: 255 mm. B: 125 mm. C: 10 mm. D: 1...
€36,00 €29,75
Hinge half for rear screen Massey Ferguson Series 307-3690
€50,63 €41,84 €46,58 €38,50
You save 8%
Replacement key lock number S588 Massey Ferguson Series 3000-3690
€28,09 €23,21
Position sensor Massey Ferguson 3050-3690, Fendt Farmer 306-312
€375,70 €310,50 €345,64 €285,66
You save 8%
PROBOSS Seat PROBOSS AS4550 Massey Ferguson air suspended 12 V, 550 mm
PROBOSS
To fit: MF. On-board voltage: 12 V. Upholstery type: Fabric. Seat contact switch: Yes. Track gauge: 260 mm. Seat width: 550 mm. Joystick console: Ja. ... More
To fit: MF. On-board voltage: 12 V. Upholstery type: Fabric. Seat cont...
€2.301,78 €1.902,30 €2.255,83 €1.864,32
You save 2%
Bearing for lift shaft 82,5 x 73 x 76 mm Massey Ferguson 2620-8160
Dimensions: 82.5 x 73 x 76 mm. More
Dimensions: 82.5 x 73 x 76 mm.
€299,55 €247,56
Cobo Rear light left / right 300 x 63 x 63 mm, 12 V
Cobo
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Blade terminal connection. Form: Rectangular. Cable length: 0.30 m. Dimensions W x H x D: 300 x ... More
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Connection: Blade terminal c...
€69,70 €57,60 €64,12 €53,00
You save 8%
Seal for tank sensor
Pressure switch vacuum gauge hydraulics, right-hand cover
Version: Hydraulics, right-hand cover. More
Version: Hydraulics, right-hand cover.
€98,86 €81,70 €90,95 €75,17
You save 8%
Temperature sensor transmission oil temperature
Version: Transmission oil temperature. More
Version: Transmission oil temperature.
€37,53 €31,02 €34,53 €28,54
You save 8%
Number plate light 12V5WK / R5W
To fit as: Case IH 238, 248, 258, 268, 288, 433, 533, 633, 733, 833, 933, 440, 540, 640, 740, 840, 940, 743, 745 S, 844 S, 845, 1255, 1455, 956, 1056,... More
To fit as: Case IH 238, 248, 258, 268, 288, 433, 533, 633, 733, 833, 9...
€23,68 €19,57
Alternator 14 V / 70 A, form A, flange 80,5 mm
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguson More
To fit as: Case IH, David Brown, JCB, Landini, Lindner, Massey Ferguso...
€192,96 €159,47 €177,52 €146,71
You save 8%
Flame glow plugs 12 V, 18 A, thread 7/8" - 14 UNF Massey Ferguson 25-8780
To fit as: Massey Ferguson 133, 135, 148, 165, 168, 175, 178, 185, 188, 595, 1014, 1080, 1104, 1200, serie: 100, 200, 300, 500, 1000, 3000, 4000, 6000... More
To fit as: Massey Ferguson 133, 135, 148, 165, 168, 175, 178, 185, 188...
€29,20 €24,13
MAHLE Starter motor 12 V, 2,8 kW, 10 teeth, 237 mm, clockwise
€441,43 €364,82 €264,39 €218,50
You save 40%
Sealing ring drive shaft 93 x 105 x 6 mm Massey Ferguson 3050-8240
Cardan shaft bearing Massey Ferguson 3050-6470
€83,91 €69,35 €77,20 €63,80
You save 8%
Ball joint 77 mm, M18 x 1,5, M24 x 1,5 L, taper 19,7 - 22,2 mm
A: 77 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 19,7 mm. F: 22,2 mm. Taper: 19,7 - 22,2 mm. More
A: 77 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 19,7 mm. F: 22,2 mm. ...
€52,42 €43,32 €48,23 €39,86
You save 8%
Master brake cylinder Massey Ferguson PMM114, Series 3000-8280
€250,60 €207,11 €230,55 €190,54
You save 8%
Repair set brake cylinder Massey Ferguson MIN531, Series 3000-8280
Brake disc foot brake Massey Ferguson 3670-8260
€226,24 €186,98 €208,14 €172,02
You save 8%
Repair set brake cylinder Massey Ferguson, Case IH
€37,99 €31,40 €34,95 €28,89
You save 8%
Sealing ring hollow shaft Ø 48 x 72 x 10 mm Massey Ferguson 3050-8250
Material: FPM (fluorine rubber). Inner Ø d1: 48 mm. Height 1: 10 mm. More
Material: FPM (fluorine rubber). Inner Ø d1: 48 mm. Height 1: 10 mm.
€41,53 €34,32 €38,21 €31,58
You save 8%
Showing 97 - 144 of 271

Massey Ferguson 3690 parts

Most people who need Massey Ferguson 3690 parts are dealing with something specific: a four-wheel drive button that no longer locks, a seat whose air suspension has given up, or an alternator that cannot keep the battery charged. More than 250 parts on this page fit the 3690, from makers including GRANIT, Cobo, HELLA, GRAMMER and DANA Spicer.

Where the parts go

In the cab you can renew the door gas struts, the sealing ring for the rear window lock and the work lamps. For the driver there are several tractor seats, among them an air suspended Maximo Professional from GRAMMER. On the dash there are push button switches, for instance the green four-wheel drive button with its lock. At the rear you will find ball type drawbars. The driveline side covers bushes as well as internal and external clutch plates, while the engine bay brings air conditioning V-belts, alternators, O-rings for the oil filler cap, sealing rings and seals for the fuel tank sensors.

Confirming it is a 3690

Massey Ferguson made plenty of tractors with nearly identical numbers, and within the 3600 range a single digit can make the difference. Read the type plate and write down the serial number too, as some components changed during the production run of a model. If the old part carries an engraved number or a label, use it as a cross check. With plates and bushes, count and measure the part you removed before it goes in the scrap bin so you can compare the splines and length with the description of the new one.

The other tractors from the brand, each with its own page, are listed under Massey Ferguson parts, handy if your yard has more than one MF.

Tip for the air con belt

A V-belt that squeals as the air conditioning compressor kicks in is almost always slipping already. When you change it, inspect the pulleys for grooves, rust and bearing play, because a damaged pulley will chew through a fresh belt in no time. Tension the belt to the compressor setting and check it again after the first few hours of work, as a new belt beds in and loosens slightly. If the compressor itself feels stiff or the clutch makes a noise as it engages, the belt is not the root cause and swapping it alone will not cure the problem, so have the compressor and its clutch checked first.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart