Menu
EUR

Massey Ferguson 390 tractor parts & technical data

Electrics, lighting, and brake and transmission components stand out among more than 400 parts for the Massey Ferguson 390 from the 300 Series on this page.

401 parts found for Massey Ferguson 390
Show:
Perkins Valve cover gasket Perkins engine 4.236, 4.248
€70,68 €58,41 €66,25 €54,75
You save 6%
GRANIT Threaded adaptor outer-Ø conical 1 1/4 inch, female thread 3/4 inch
€34,36 €28,40 €32,60 €26,94
You save 5%
GRANIT Frost plug Ø 35,4 mm
€2,16 €1,79
GRANIT Mass balancing Massey Ferguson, Perkins
€1.388,77 €1.147,74 €1.319,30 €1.090,33
You save 5%
Piston ring set Ø 101,05 mm, 2,5 mm / 2,5 mm / 5 mm
Dimensions: 3 rings, Ø 101.05 mm, 2.5 mm / 2.5 mm / 5 mm. More
Dimensions: 3 rings, Ø 101.05 mm, 2.5 mm / 2.5 mm / 5 mm.
€22,85 €18,88
GRANIT Valve set steering valve 3596140M91 Massey Ferguson 200-5300
€109,21 €90,26 €103,70 €85,70
You save 5%
GRAMMER Seat Compacto Basic S MSG83/511, mechanical, PVC, 400 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 400 mm. Fore/aft isolator: Optional. Sea... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.010,89 €835,45 €960,30 €793,64
You save 5%
Handle for side window, left Massey Ferguson Series 5S-8400
€58,56 €48,40 €55,60 €45,95
You save 5%
Gas strut door 350 N, 280 mm, C 13 mm, D 13 mm
Newtons: 350. A: 280 mm. B: 130 mm. C: 13 mm. D: 13 mm. To fit: door. Form: 6. More
Newtons: 350. A: 280 mm. B: 130 mm. C: 13 mm. D: 13 mm. To fit: door. ...
€45,98 €38,00 €43,65 €36,07
You save 5%
Gaiter inner-Ø upper 12 mm Massey Ferguson
To fit as: Massey Ferguson 35, 65, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 185, 188, 230, 235, 240, 245, 250, 253, 255, 260, 265, 275, ... More
To fit as: Massey Ferguson 35, 65, 135, 140, 145, 148, 152, 155, 158, ...
€1,82 €1,50
LUK Clutch plate 330TDCA 25,5 x 29,4 mm, 21 splines, sintered
LUK
Dimensions (mm): 25.5 x 29.4 21 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 25.5 x 29.4 21 grooves | Material specifications: Sin...
€374,94 €309,87 €356,15 €294,34
You save 5%
LUK Clutch plate 330TDCN 25 x 29 mm, 21 splines, sintered Massey Ferguson
LUK
Material specifications: Sintered clutch lining | Dimensions (mm): 25 x 29 21 grooves More
Material specifications: Sintered clutch lining | Dimensions (mm): 25 ...
€466,63 €385,64 €422,15 €348,88
You save 10%
Clutch plate single clutch 38 x 41 mm, flywheel 40 mm
Dimensions (mm): 38 x 41 | Flywheel dimension (mm): 40 (tief) | Additional information: Made in Germany More
Dimensions (mm): 38 x 41 | Flywheel dimension (mm): 40 (tief) | Additi...
€407,96 €337,16 €369,10 €305,04
You save 10%
Steering cylinder Massey Ferguson 365 - 399
€402,69 €332,80 €382,55 €316,16
You save 5%
Cobo Rear light left / right 184 x 76 x 70 mm, 12 V Massey Ferguson
Cobo
Nominal voltage (V): 12 | Cable length (mm): 200 | Type: Bulb | Connection: 9-way round plug-in coupling, 4-way configuration | Installation location:... More
Nominal voltage (V): 12 | Cable length (mm): 200 | Type: Bulb | Connec...
€79,01 €65,30 €75,00 €61,98
You save 5%
Showing 121 - 144 of 401

Massey Ferguson 390 parts for the linkage, clutch and engine

The MF 390 is still a working tractor on many farms, and with a machine that has done this many hours the repairs tend to come back to the same places. This page carries more than 400 Massey Ferguson 390 parts, from small sealing rings to clutch plates.

Linkage that drops under load

If the linkage slowly sinks with an implement on, the lift cylinder seals are usually the first suspect. For the 390 there are lift cylinder sealing rings, lift shaft seals, gear wheels for the linkage and repair kits. Yokes for the three point linkage, ball joints, shafts and thrust washers are also on this page. When you reseal the lift cylinder, inspect the bore carefully. Score marks or rust pitting will cut new seals straight away and you will be doing the job twice.

Clutch, engine and electrics

For the driveline there are clutch plates, including LUK. With the clutch apart, renew the release bearing and check the flywheel face for hot spots, scoring and fine cracks. A new plate on a glazed flywheel will not last. Make sure the plate slides freely on the input shaft splines, with just a trace of grease. On the engine side you will find alternators, starter motors, V-belts and gaskets, such as the exhaust gasket. Other brands here include GRANIT, Eaton, Cobo and MAHLE.

Do not overlook the V-belt. A slipping belt undercharges the battery and slows the water pump, and you often only notice when the battery is flat or the temperature gauge climbs. Shiny flanks or cracks on the inside mean it is time for a new one. Retension a new belt after the first day of work, because it stretches a little as it beds in.

Cab parts

Inside the cab, what wears is what you move every day. There are door gas struts, so the door stays open again, and Compacto seat cushions. Fit a gas strut with the rod pointing down, which keeps the seal inside the body lubricated and makes it last longer.

Confirming the model and the rest of the 300 series

The rating plate tells you if you have a 390 or a 390T, which is a separate model with its own page. Older Massey Ferguson parts often carry a reference number on the part itself or in the description, which makes comparing easy. These tractors from the same 300 series have their own pages:

Every other model is listed on the main Massey Ferguson parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart