Menu
EUR

Massey Ferguson 4355 tractor parts & technical data

Electrics, lighting, steering and the front axle form the core of the more than 300 parts for the Massey Ferguson 4355 from the 4300 series.

350 parts found for Massey Ferguson 4355
Show:
Aircon compressor 12 V, pulley Ø 140 mm, 2 grooves, 190 ccm oil
Suitable oil: PAG 46 | Fixing: EM | Pulley Ø (mm): 140 | Oil quantity (ccm): 190 | Nominal voltage (V): 12 | Refrigerant: R 134a | No. of grooves: 2 More
Suitable oil: PAG 46 | Fixing: EM | Pulley Ø (mm): 140 | Oil quantity...
€412,31 €340,75 €391,65 €323,68
You save 5%
MAHLE Alternator 14 V, 80 A, flange 82 mm Massey Ferguson 4225 - 4370
MAHLE
Nominal values (V / A): 14 / 80 | Belt width (mm) / type: - | Installation angle (°): l 60 | Direction of rotation: ↻ | Charging current (A): 80 | ... More
Nominal values (V / A): 14 / 80 | Belt width (mm) / type: - | Installa...
€357,57 €295,51 €223,45 €184,67
You save 38%
GRANIT Alternator 14 V, 120 A, flange 82 mm, Massey Ferguson
GRANIT
Nominal voltage (V): 14 | Mounting L / d / R (mm): 82,0 / 8,3 / 86,0 | Nominal values (V / A): 14 / 120 | Flange size (mm): 82,0 | Form: A | Additiona... More
Nominal voltage (V): 14 | Mounting L / d / R (mm): 82,0 / 8,3 / 86,0 |...
€262,27 €216,75 €249,15 €205,91
You save 5%
DANA Spicer O-ring differential front axle 710, 2 g
Eaton As transmission Massey Ferguson, 4,16 kg
Eaton
Reference no.: 1687642M1 More
Reference no.: 1687642M1
€204,01 €168,60 €193,80 €160,17
You save 5%
Eaton Thrust washer transmission 112 g Challenger, Massey Ferguson
Eaton
Reference no.: 1866545M2 More
Reference no.: 1866545M2
€35,15 €29,05
GRAMMER Tractor seat Maximo Comfort Plus 530 mm Massey Ferguson
GRAMMER
Lordosenstütze: Mechanical | Included in delivery: Seat supplied with seat contact switch and bracket for your existing control armrest. The bracket ... More
Lordosenstütze: Mechanical | Included in delivery: Seat supplied with...
€2.177,55 €1.799,63
Ball joint 290 mm, taper 24 - 26 mm, M18 x 1,5, M18 x 1,5
A: 290 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 290 mm. C: M18 x 1,5 mm. D: M18 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€84,47 €69,81 €80,20 €66,28
You save 5%
GRANIT Needle central transmission 3,20 x 19,30 mm Massey Ferguson
GRANIT
Dimensions: 3.20 x 19.30 mm. Outer Ø: 19.05 mm. Inner Ø: 3,2 mm. More
Dimensions: 3.20 x 19.30 mm. Outer Ø: 19.05 mm. Inner Ø: 3,2 mm.
€0,96 €0,79
GRANIT Gear lever knob Massey Ferguson 290-5365
GRANIT Needle bearing reversing clutch input shaft Ø 41,3 x 31,75 x 19,05 mm
GRANIT
Dimensions: 31,75 x 41,3 x 19,05 mm. Outer Ø: 41,3 mm. Inner Ø: 31.75 mm. Height 1: 19.05 mm. More
Dimensions: 31,75 x 41,3 x 19,05 mm. Outer Ø: 41,3 mm. Inner Ø: 31.7...
€30,20 €24,96
GRANIT Flywheel 115 teeth Massey Ferguson 390-4365, Perkins 1004.4T
GRANIT
Number of teeth: 115. More
Number of teeth: 115.
€455,82 €376,71 €433,00 €357,85
You save 5%
GRANIT Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
GRANIT
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€216,46 €178,89 €205,60 €169,92
You save 5%
Showing 169 - 192 of 350

Massey Ferguson 4355 parts for axles, engine and cab

On a Massey Ferguson 4355 with a few years behind it, the work is often the kind you do not see straight away: leaking sealing rings on the axles, a gear in the final drive, or a turbo gasket letting oil through. This page has more than 300 new parts that fit this tractor, from brands such as GRANIT, Eaton, Cobo, DANA Spicer and GRAMMER.

Axles and drive

For the rear axle there is a gear wheel for the planetary drive, and for the front axle adjusting plates for the bevel gear. Those plates set how the pinion meshes with the crown wheel. Measure the old shims before replacing them and keep to the same total thickness, unless the contact pattern on the teeth tells you otherwise. Sealing rings and O-rings should always be renewed once an axle has been opened. Wipe them lightly with the same oil that runs in the housing before fitting, so they do not roll or tear as you press them in.

Engine and fuel

For the engine there are gaskets, such as the one for the oil pressure line to the turbocharger, and a seal for the fuel tank sensor. A leaking turbo line usually shows itself first as an oily film on the block. Renew the gasket straight away and check that the line itself is not cracked.

Lights, switches and cab

Lighting covers work lamps, headlights for left and right, and rocker switches, including ones for the work lamps. In the cab, air-suspended GRAMMER tractor seats, PROBOSS seats, mirrors and gas struts will fit. When the 4355's steering feels loose, the ball joints are the first thing to check.

A ball joint with play shows up as steering that no longer responds crisply. Replace it together with the split pin and have the tracking checked afterwards, otherwise the front tyres will wear unevenly.

Finding the right Massey Ferguson 4355 parts

Start with the type plate so you are sure it is a 4355. For axle parts, the plate or stamping on the axle housing itself often helps too, and the old part usually carries a reference number. With those details you can compare the products on this page.

Massey Ferguson placed this 4355 in its 4300 line. The Massey Ferguson 4325, Massey Ferguson 4335 and Massey Ferguson 4345 each have their own page as well, handy when there are several tractors from this line on the farm. Every other model from the brand is under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart