Menu
EUR

Massey Ferguson 4707 tractor parts & technical data

Here are more than 50 parts for the Massey Ferguson 4707, among them trailer couplings, three-point linkage parts and electrics for this 4700 series model.

46 parts found for Massey Ferguson 4707
Show:
Knorr Bremse Antifreeze pump air pressure- / brake system, 684 g
5%
Knorr Bremse
Antifreeze pump air pressure- / brake system, 684 g
€268,44 €221,85 €255,00 €210,74
 
SANDEN Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PV6 Massey Ferguson
5%
SANDEN
Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PV6 Massey Ferguson
Pulley Ø (mm): 119 | Nominal voltage (V): 12 | Reference no.: 8244 | For compres...
€627,09 €518,26 €595,70 €492,31
 
MAHLE Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32,5 mm
38%
MAHLE
Gear reduction starter 12 V, 3,2 kW, 10 teeth, Ø 82,5 mm, flange 32,5 mm
€526,37 €435,02 €328,95 €271,86
 
Filler cap for expansion tank
5%
Filler cap for expansion tank
Version: For expansion tank.
€49,42 €40,84 €46,90 €38,76
 
Thermostat Ø 67 mm, 83 °C
5%
Thermostat Ø 67 mm, 83 °C
Ø: 67 mm. Temperature: 83 °C.
€37,90 €31,32 €36,00 €29,75
 
Outlet valve Fendt, Massey Ferguson
Outlet valve Fendt, Massey Ferguson
€58,25 €48,14
 
GRANIT Water pump Massey Ferguson 4607-5713, Valtra-Valmet A 74 - A 134
5%
GRANIT
Water pump Massey Ferguson 4607-5713, Valtra-Valmet A 74 - A 134
€568,89 €470,16 €540,40 €446,61
 
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
5%
Mirror 195 x 143 mm, unheated, rod-Ø 10 - 22 mm
Dimensions: 195 x 143 mm. Height: 195 mm. Width: 143 mm. Version: Unheated. Rod ...
€46,86 €38,73 €44,50 €36,78
 
Pivot fender left Massey Ferguson 5460-8732
5%
Pivot fender left Massey Ferguson 5460-8732
€440,08 €363,70 €418,00 €345,45
 
MAHLE Alternator 14 V, 120 A, pulley Ø 60 mm, Poly pulley 6 ribs
38%
MAHLE
Alternator 14 V, 120 A, pulley Ø 60 mm, Poly pulley 6 ribs
Version: With V-ribbed belt pulley (6 ribs) | Mounting hole Ø / R (mm): 10,2 | P...
€497,24 €410,94 €310,75 €256,82
 
Walterscheid Top drawbar rail 311 mm, pin Ø 22 mm, coupling pin 38 mm
18%
Walterscheid
Top drawbar rail 311 mm, pin Ø 22 mm, coupling pin 38 mm
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€2.209,02 €1.825,64 €1.822,40 €1.506,12
 
Gas strut rear window 150 N, 485 mm, stroke 200 mm Massey Ferguson
5%
Gas strut rear window 150 N, 485 mm, stroke 200 mm Massey Ferguson
Newtons: 150. A: 485 mm. Stroke: 200 mm. d1: 8 mm. d2: 19 mm. To fit: Rear windo...
€62,07 €51,30 €58,95 €48,72
 
Mirror unheated 263 x 160 mm, rod Ø 10 - 22 mm Massey Ferguson
10%
Mirror unheated 263 x 160 mm, rod Ø 10 - 22 mm Massey Ferguson
Tractor type: Massey Ferguson 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 43...
€50,72 €41,92 €45,85 €37,89
 
MAHLE Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PAD Massey Ferguson
38%
MAHLE
Aircon compressor 12 V, pulley Ø 119 mm, 6 grooves, PAD Massey Ferguson
Refrigerant: R 134a | Reference no.: ACP 1047 000S | Pulley Ø (mm): 119 | Suitab...
€639,45 €528,47 €399,60 €330,25
 
Mirror 260 x 180 mm, unheated, rod Ø 10 mm
10%
Mirror 260 x 180 mm, unheated, rod Ø 10 mm
Dimensions: 260 x 180 mm. Rod Ø: 10 mm.
€57,84 €47,80 €52,30 €43,22
 
Showing 25 - 46 of 46

Massey Ferguson 4707 parts for road work, hitch and cooling

Taking a Massey Ferguson 4707 on the road means you want clear mirrors, a working beacon and a trailer that brakes properly. This page lists more than 50 parts for the 4707, from mirrors and air brake coupling heads to thermostats and aircon compressors. Brands include Walterscheid, GRANIT, MAHLE, Scharmüller and SANDEN.

Mirrors come in several versions for the 4707. A mirror that shakes is often loose on its rod clamp rather than in the glass, so check the mounting before ordering a new one. There is also a beacon for road travel. If you pull equipment with air brakes, you will find coupling heads for the supply line here. Keep the dust caps closed whenever nothing is hooked up, so dirt does not settle in the seal.

Hitch and top link

At the back it comes down to the drawbar frame, top drawbar, ball hitch and a ball insert, based on Scharmüller and Walterscheid systems. There is also a hydraulic top link. If it slowly creeps in, check the hoses and couplings before you start on the cylinder itself.

Cooling, air con and fenders

For the engine there are thermostats and a water pump seal. A pump that drips from its weep hole is an early sign the seal has had it. The cab is covered by aircon compressors, including SANDEN, and a gas strut. The fenders hang on pivots with a spring, and a tank cap is on the page as well.

A new aircon compressor needs the right oil in the right quantity. If the system has been open for a long time, have it evacuated before charging so no moisture stays behind. The gas strut holds the window or door open and slowly loses pressure over the years, so a window that sinks back halfway is a clear sign it is due. With the fender springs and pivots, check the mounting bolts as well, since a loose fender can touch the tyre on full lock. The tank cap keeps dirt out of the fuel, so replace it once its seal has cracked.

Type plate and reference number

From the outside the 4707 looks much like its siblings in the 4700 series, so the type plate settles it. With an aircon compressor or thermostat, then compare the number on the old part with the reference number shown for the product, and with fender parts check left or right.

From the same series, the Massey Ferguson 4708 and the Massey Ferguson 4709 also have their own pages, each showing what fits that model. For a different Massey Ferguson, start from Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart