Menu
EUR

Massey Ferguson 5450 tractor parts & technical data

The 5400 series page for the Massey Ferguson 5450 runs to more than 190 parts. Electrics, trailer couplings and lighting are three of the groups you can browse.

195 parts found for Massey Ferguson 5450
Show:
Sealing ring fuel line Ø 8 x 4,6 mm, tube-Ø 3/16 inch
Sealing ring fuel line Ø 8 x 4,6 mm, tube-Ø 3/16 inch
Dimensions: Height 6, Outer Ø 8, Inner Ø 4.6, For pipe Ø 3/16" mm.
€1,00 €0,83
 
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Tank cap with ventilation, thread Ø 60 / 64 mm, tank collar Ø 65 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€27,80 €22,98
 
LED work lights spotlight 23 W, 3071 lm, 183 x 101 x 67 mm, 12 / 24 V
5%
LED work lights spotlight 23 W, 3071 lm, 183 x 101 x 67 mm, 12 / 24 V
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included:...
€61,09 €50,49 €58,00 €47,93
 
GRANIT Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
GRANIT
Oil pressure switch engine 1/8" NPT, 0,4 - 0,7 bar, open function
Version: Thread: 1/8" NPT, Measuring range: 0.4 - 0.7 bar, normally closed, Blad...
€10,95 €9,05
 
Seal kit hydraulic steering Massey Ferguson Series 5400-5610
5%
Seal kit hydraulic steering Massey Ferguson Series 5400-5610
€122,68 €101,39 €116,50 €96,28
 
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
21%
Walterscheid
Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg,...
€2.124,41 €1.755,71 €1.669,15 €1.379,46
 
Walterscheid Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
21%
Walterscheid
Piton Fix rail width 335 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.863,82 €1.540,35 €1.464,40 €1.210,25
 
Walterscheid Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
18%
Walterscheid
Ball hitch K80 335 / 22 / 30 mm, 97,1 kN
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 97,1 kN. C...
€1.871,87 €1.547,00 €1.544,25 €1.276,24
 
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
Length (mm): 60 | Thread: M18 X 1,5
€15,55 €12,85
 
ROCKINGER Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
20%
ROCKINGER
Drawbar without sensor rail 336 mm, coupling pin 38 mm, black
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.043,02 €862,00 €838,55 €693,02
 
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
21%
Walterscheid
Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 ...
€1.175,21 €971,25 €923,35 €763,10
 
HELLA Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
HELLA
Work lamp spotlight H3, 12 / 24 V, square, 182 x 102 x 95 mm, built-in
Bulb: H3. Connection: Open cable ends. Form: Rectangular. Hole spacing: 160 mm. ...
€80,85 €66,82
 
GRANIT Tie rod and left 224 mm, M20 x 1,5, taper 23,5 - 26,4 mm
5%
GRANIT
Tie rod and left 224 mm, M20 x 1,5, taper 23,5 - 26,4 mm
A: 224 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 23,5 mm. F: 26,4 mm. Taper: 23,5...
€158,43 €130,93 €150,50 €124,38
 
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
5%
Tank cap with ventilation Lockable, thread Ø 60 / 64 mm
Thread Ø mm: 60 / 64. Filler neck Ø: 65 mm.
€35,37 €29,23 €33,60 €27,77
 
Walterscheid Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
21%
Walterscheid
Drawbar ball 80 rail 330 mm, pin Ø 25 mm, 4000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000...
€2.166,20 €1.790,25 €1.702,00 €1.406,61
 
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
10%
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: ...
€90,28 €74,61 €81,65 €67,48
 
GRANIT Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
GRANIT
Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
Version: 12 V / 50 A, With bracket, 4-pin, blade terminal 6.3 mm.
€31,60 €26,12
 
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Drawbar frame standard 97,1 kN, 330 mm, ball 80
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN)...
€3.271,95 €2.704,09
 
DANA Spicer Wheel hub final drive front axle 730
DANA Spicer
Wheel hub final drive front axle 730
€408,25 €337,40
 
GRANIT Tank cap engine cooling
5%
GRANIT
Tank cap engine cooling
€44,24 €36,56 €42,00 €34,71
 
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
23%
ROCKINGER
Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.414,07 €1.168,65 €1.082,75 €894,83
 
Loctite / Teroson Glass kit BOND 120 black - 310 ml cartridge
Loctite / Teroson
Glass kit BOND 120 black - 310 ml cartridge
Colour: Black. Description: TEROSON® BOND 120 is a high-performance glass adhesi...
€28,25 €23,35
 
Rocker switch hydraulics linkage rear, 6 connections
10%
Rocker switch hydraulics linkage rear, 6 connections
Version: Rear power lift: lift/lower, 6 blade terminals.
€208,61 €172,41 €188,70 €155,95
 
Showing 1 - 24 of 195

Clutch, drawbar and cab parts for the Massey Ferguson 5450

Pulling heavy trailers with a Massey Ferguson 5450 loads two places harder than the rest: the clutch pack and the drawbar. That is where this page begins. There are more than 190 parts here that fit this type, with brands such as Walterscheid, ROCKINGER, GRANIT, HELLA and Scharmüller.

Clutch plates

Internal plates and external plates for the clutch are both available. Before fitting new friction plates, soak them in the correct oil for a while so the lining is fully saturated. Plates assembled dry can slip or glaze in their first hours of work. Replace the pack as a set and inspect the steel plates for blue heat marks or distortion.

Drawbar and frame

At the rear there are drawbar balls and complete drawbar frames from Walterscheid and ROCKINGER among others. A worn ball shows itself as slack and knocking when you pull away or brake. Check the locking mechanism and keep the ball lightly greased. After fitting a new drawbar frame, go over the mounting bolts again after the first few days of work and bring them back to the specified torque, because the mating faces settle under load.

Cab, lights and air conditioning

For the cab you will find handles, knobs, mirrors and gas struts for the rear window, plus a sealing ring for the rear window lock. On the electrical side there are work lamps, rocker switches with an illumination indicator, push button switches and relays. An aircon compressor and a tank cap complete the list.

Before the compressor comes out, the refrigerant has to be recovered by someone with the proper equipment. It must not be vented, and a new compressor lasts longer when the system is evacuated and recharged properly afterwards.

Confirming your 5450 and choosing the part

Read the type from the rating plate and keep the reference number of the old part to hand. With clutch plates, note the number and order of plates in the pack, and with a drawbar, the rail width.

Massey Ferguson placed the 5450 in its 5400 family alongside several sister models. These types from that series also have their own page: 5425, 5435, 5445, 5455, 5460 and 5465. The 5430 and the 5470 are in the series too. Do not assume parts are shared between these types, but order for the tractor in your yard. The rest of the make is on the Massey Ferguson parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart