Menu
EUR

Massey Ferguson 5611 tractor parts & technical data

Everything that fits the Massey Ferguson 5611 from the 5600 series is collected here: more than 160 parts, such as trailer couplings, electrics and lighting.

165 parts found for Massey Ferguson 5611
Show:
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Ø: 67 mm. Temperature: 83 °C.
€39,96 €33,03
 
Crankshaft Massey Ferguson 5611-5713, Valtra-Valmet A 104 - A 134
4%
Crankshaft Massey Ferguson 5611-5713, Valtra-Valmet A 104 - A 134
€1.249,11 €1.032,32 €1.199,18 €991,06
 
Water pump Massey Ferguson 4607-5713, Valtra-Valmet A 74 - A 134
8%
Water pump Massey Ferguson 4607-5713, Valtra-Valmet A 74 - A 134
€593,64 €490,61 €546,15 €451,36
 
Handle side window, right Massey Ferguson Series 5S-8400
8%
Handle side window, right Massey Ferguson Series 5S-8400
€61,11 €50,50 €56,22 €46,46
 
Nut Massey Ferguson Series 300-8400
Nut Massey Ferguson Series 300-8400
€32,85 €27,15
 
Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. For...
€39,83 €32,91
 
Push button switch hydraulics lower, outer shifting on the fender
Push button switch hydraulics lower, outer shifting on the fender
Version: Lower control hydraulics, external switch on mudguard. Menke no.: 80904...
€37,60 €31,07
 
Heating flange Fendt, Massey Ferguson
Heating flange Fendt, Massey Ferguson
€189,64 €156,73
 
Oil drain valve M18 x 1,5
8%
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€68,16 €56,33 €62,71 €51,82
 
Main bearing standard Ø 85 mm
8%
Main bearing standard Ø 85 mm
€50,48 €41,72 €46,44 €38,38
 
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Replacement glass curved 315 x 225 mm, unheated Massey Ferguson, Case IH
Dimensions: 315 x 225 mm. Version: Unheated. Installation location: Right/left.
€16,84 €13,92
 
Push button switch hydraulics lift, outer shifting on fender
8%
Push button switch hydraulics lift, outer shifting on fender
Version: Raise control hydraulics, External switch on mudguard.
€35,47 €29,31 €32,63 €26,97
 
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal.
€9,31 €7,70
 
HELLA Relays changeover contact 12 V, 30 - 40 A, with holder, 5-pin, 6,3 mm
HELLA
Relays changeover contact 12 V, 30 - 40 A, with holder, 5-pin, 6,3 mm
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm, With resi...
€22,81 €18,85
 
Contact switch transmission 50 km/hour safety switch black
Contact switch transmission 50 km/hour safety switch black
Version: Safety switch, mechanical with plug connection (black).
€71,24 €58,88
 
Oil pressure switch oil filter steering 12 / 24 V, with seal ring
8%
Oil pressure switch oil filter steering 12 / 24 V, with seal ring
Version: With sealing ring, operating voltage 12/24 V. Menke no.: 210021.
€231,86 €191,62 €213,31 €176,29
 
Temperature sensor for common rail systems Sisu-engines
8%
Temperature sensor for common rail systems Sisu-engines
Version: For common rail systems, to fit Sisu engines.
€174,05 €143,84 €160,13 €132,34
 
Showing 145 - 165 of 165

Massey Ferguson 5611 parts

This page gathers more than 160 Massey Ferguson 5611 parts from GRANIT, Scharmüller, Walterscheid, HELLA and ROCKINGER. They cover the hitch, the clutch, cooling and a long list of cab fittings.

At the rear

Drawbars with a ball, complete drawbar frames and adapter plates take care of towing. Check the ball and the locking mechanism for wear at regular intervals and keep the sliding face lightly greased. A worn ball lets the drawbar knock and speeds up wear on both the hitch and the trailer eye.

Clutch and cooling

For the clutch there are internal plates and external plates. Before fitting new friction plates, soak them for a while in the same oil they will run in. Put them in dry and they risk wear from the very first engagement. Rebuild the pack in the same order as the old one, alternating inner and outer.

The cooling side is covered by thermostats and temperature sensors, including a sensor for common rail Sisu engines.

When you change a thermostat, always renew the housing gasket or O-ring and clean the mating faces. Refill the cooling system slowly with the engine idling, and if the thermostat has a bleed hole, fit it at the top so no air stays trapped in the block. It is worth testing the temperature sensor at the same time, since a faulty reading is easily mistaken for a sticking thermostat.

In the cab

Handles, knobs, mirrors, relays and push button switches are all here, such as the switch for lowering the hydraulics on the fender. A seal for the door handle keeps draughts and dust out. Gas struts hold the roof window open again, and a flood beam work lamp lights up the work area after dark.

Checking the fit

The 5611 is part of the Massey Ferguson 5600 series. Models in this series look alike, but parts can differ. Check the type plate first, then the reference number on the old part. On clutch plates it is sometimes on the edge, and on a thermostat on the flange. Only order once that number agrees with the information listed for the part.

The other models in the series each have a page of their own:

Each one shows only the parts that fit that tractor. Parts for every other Massey Ferguson model are collected on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart