Menu
EUR

Massey Ferguson 5613 tractor parts & technical data

This page covers the Massey Ferguson 5613 from the 5600 series with more than 170 items, including trailer couplings, electrics and lighting.

166 parts found for Massey Ferguson 5613
Show:
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
Scharmüller Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Scharmüller
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour: Schwarz | Guide width (mm): 32 | D-value (kN): 112 | Dc-value (kN): 106 | V-val... More
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour:...
€1.287,16 €1.063,77
Wabco Trailer control valve 0 - 0,5 bar activation, 14 bar final pressure, 2 m³
Wabco
Set pressure (bar): 0-0,5 | Displacement (m³): 2 | End pressure (bar): 14 More
Set pressure (bar): 0-0,5 | Displacement (m³): 2 | End pressure (bar)...
€1.765,39 €1.459,00 €1.677,10 €1.386,03
You save 5%
Scharmüller Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.160,61 €959,18 €1.026,40 €848,26
You save 12%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
Scharmüller Ball 80® ball inserts gray cast iron, rail width 311 mm, 4000 kg
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: AGCO grey. Overh... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.122,52 €927,70 €992,75 €820,45
You save 12%
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
You save 21%
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 60 mm, 415 mm
Scharmüller
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Version: ball 80. Colour: Pöttinger red. Dimensions: shaft height x width: 60 x 6... More
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Ve...
€1.865,61 €1.541,83 €1.649,95 €1.363,60
You save 12%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
You save 18%
Rotary switch heating and air conditioning, 5 plug connections
Version: Without knob, 5 plug connections. More
Version: Without knob, 5 plug connections.
€65,45 €54,09
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal.
€8,90 €7,36
HELLA Relays changeover contact 12 V, 30 - 40 A, with holder, 5-pin, 6,3 mm
HELLA
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm, With resistor for suppressing inductive interference voltage peaks. Colour: Bla... More
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm,...
€21,85 €18,06
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
LED work lights spotlight 4400 lm, 56 W, 10 - 30 V, 160 x 100 x 68 mm
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 class 4 | Width (mm): 160 | Theoretical luminous flux (lm): 5320 | Housing materia... More
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 cl...
€76,82 €63,49 €72,95 €60,29
You save 5%
Scharmüller Drawbar rail 311 mm, coupling pin 31 mm, AGCO gray
Scharmüller
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2500 kg. D-value: 89,3 kN. Colour: AGCO grey. Desc... More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.114,70 €921,24
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C. More
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
You save 5%
Cylinder head gasket engine Sisu 420
€146,11 €120,75 €138,80 €114,71
You save 5%
Handle for side window, left Massey Ferguson Series 5S-8400
€58,56 €48,40 €55,60 €45,95
You save 5%
Push button switch front linkage lift / lower
Version: Front power lift: lift/lower. More
Version: Front power lift: lift/lower.
€76,15 €62,93
Knob black switch, heating / air conditioning
Version: For switch, heater/air conditioning. More
Version: For switch, heater/air conditioning.
€19,10 €15,79
HELLA Multifunction relay changeover contact 12 V, 30 - 40 A, 5-pin
HELLA
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 mm, With parallel resistor for suppressing inductive interference voltage peaks.... More
Version: 12 V / 30 - 40 A, Without bracket, 5-pin, blade terminal 6.3 ...
€15,85 €13,10
Temperature sensor transmission oil temperature
Version: Transmission oil temperature. More
Version: Transmission oil temperature.
€35,96 €29,72 €34,15 €28,22
You save 5%
GRANIT Horn 12 V with bracket, Ø 97 mm, blade terminal 2 x 6,3 mm
GRANIT
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270, 275, 283, 290, 298, 340, 342, 350, 352, 355, 360, 362, 365, 375, 383, 390, 393... More
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270...
€23,70 €19,59
Showing 25 - 48 of 166

Massey Ferguson 5613 parts for the cab, cooling and clutch

Climb into a 5613 and the small things show first. A heater knob that spins without doing anything, a roof hatch that no longer stays up, a loose grab handle. This page lists more than 170 replacement parts for this Massey Ferguson, from GRANIT, Scharmüller, Walterscheid, HELLA and ROCKINGER, covering those small cab items as well as clutch components.

Inside the cab

There are knobs for the heater control switch, handles, mirrors and gas struts for the roof window. Fit a gas strut with the rod pointing down so the oil inside keeps the seal lubricated. Relays, flood beam work lamps and seals such as the door handle seal complete this part of the tractor.

Fender switches and wiring

The push button switches for the hydraulics, for example to lower the linkage, sit on the fender in all weathers and take the pressure washer as well. A little dielectric grease in the connector during fitting keeps moisture away from the contacts and saves you chasing intermittent faults later.

Thermostat and air conditioning

For cooling there are thermostats, and for the air conditioning there are temperature sensors. Not sure whether a thermostat still opens properly? Hang it in a pan of water on the stove with a thermometer next to it, and you will see when it starts to open and whether it opens fully. A new gasket for the housing is part of the job every time. A thermostat stuck open keeps the engine cold in winter, one stuck shut sends the temperature climbing.

Clutch plates and the drawbar

Internal and external plates for the clutch are on this page. Replace them as a full set and soak new plates in the correct oil before assembly, so they do not grab dry the first time you engage. While the pack is open, look for grooves worn into the carrier, since a stepped carrier makes plates hang up. At the rear you will find drawbar balls, drawbar frames and adapter plates. Measure the rail width and pin diameter on your own frame before choosing a drawbar ball, because that is what decides the fit.

Start with the serial number on the rating plate, then compare any reference number on the old part with the product details. The 5613 sits in the Massey Ferguson 5600 series, and the other models in that line each have their own page: Massey Ferguson 5608, Massey Ferguson 5609, Massey Ferguson 5610, Massey Ferguson 5611 and Massey Ferguson 5612. The full list for the brand is on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart