Menu
EUR

Massey Ferguson 6455 tractor parts & technical data

Need parts for the Massey Ferguson 6455 from the 6400 Series? More than 450 items fit, including electrics, trailer couplings and lighting.

453 parts found for Massey Ferguson 6455
Show:
Brake disc Ø 343 mm, thickness 5,2 mm, 13 teeth Massey Ferguson
€192,77 €159,31 €183,10 €151,32
You save 5%
O-ring PTO shaft 104,37 x 3,53 mm Massey Ferguson
Version: Ø 104,37 x 3,53 mm. More
Version: Ø 104,37 x 3,53 mm.
€8,35 €6,90
GRANIT Piston ring front wheel drive Massey Ferguson 3050-5612
€44,07 €36,42 €41,85 €34,59
You save 5%
GRANIT PTO shaft end piece 1 3/8 inch, 6 splines, 286,5 mm, 540 rpm
GRANIT
Version: 1 3/8", 6 splines, 540 rpm. Length: 286,5 mm. More
Version: 1 3/8", 6 splines, 540 rpm. Length: 286,5 mm.
€235,08 €194,28 €223,30 €184,55
You save 5%
Nord-Lock detent edged washers 17 x 25,4 x 3,4 mm, DIN 88132 - 10 pieces
Description: With NORD - LOCK the bolt locks itself., The key to ensuring the best locking action lies in the different angles. The expansion of the N... More
Description: With NORD - LOCK the bolt locks itself., The key to ensur...
€37,50 €30,99
V-belt air conditioning Massey Ferguson 5445-6455
Version: For air conditioning system. More
Version: For air conditioning system.
€19,35 €15,99
GRANIT Water pump McCormick MC 115-130, Massey Ferguson 5445-7480
€234,90 €194,13 €223,15 €184,42
You save 5%
Radiator Massey Ferguson 3640, 5425-5455, 6445, 6455
To fit as: Massey Ferguson Serie 3000, 3640, Serie 5400 (5425, 5435, 5445, 5455 Tier 3), Serie 6400 (6445, 6455 Tier 3). More
To fit as: Massey Ferguson Serie 3000, 3640, Serie 5400 (5425, 5435, 5...
€820,51 €678,11 €779,45 €644,17
You save 5%
Tube vertical 1060 mm, inner-Ø 65 mm Massey Ferguson
Version: Length: 1060 mm, Inner Ø: 65 mm. Inner Ø: 65 mm. Length: 1060 mm. More
Version: Length: 1060 mm, Inner Ø: 65 mm. Inner Ø: 65 mm. Length: 10...
€96,85 €80,04 €92,00 €76,03
You save 5%
GRANIT Stop solenoid switch 12 V Massey Ferguson 80995, Case IH 80995
GRANIT
Nominal voltage: 12 V. More
Nominal voltage: 12 V.
€69,96 €57,82 €66,45 €54,92
You save 5%
Lift arm right Massey Ferguson series 5400, 6200, 6400
€278,07 €229,81 €264,15 €218,31
You save 5%
Lift arm left Massey Ferguson series 5400, 6200, 6400
€278,07 €229,81 €264,15 €218,31
You save 5%
Top link cat. 2, 495 - 710 mm, M30 x 3,5, threaded spindle / threaded spindle
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 360 mm. D: 495 / 710 mm. E: 80 mm. F: 80 mm. G: 51 mm. H: 51 mm. Type: Ball joint/ball joint. ... More
I: M30 x 3,5 mm. A cat.: 2 / 25,4. B cat.: 2 / 25,4. C: 360 mm. D: 495...
€291,63 €241,02 €277,00 €228,93
You save 5%
GRANIT Handle Fendt, Massey Ferguson
€36,65 €30,29
Pivot fender left Massey Ferguson 5460-8732
€440,08 €363,70 €418,00 €345,45
You save 5%
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
You save 5%
Walterscheid Drawbar frame System 80 335/22/30, 2000/3000 kg, 75,0/85,6/88,2 kN
Walterscheid
D-value: 75,0 ; 85,6 ; 88,2 kN. Detent pin Ø: 22 mm. Guide width: 30 mm. Rail width: 335 mm. Load capacity: 2000 / 3000 kg. Detent: 6. EC certificati... More
D-value: 75,0 ; 85,6 ; 88,2 kN. Detent pin Ø: 22 mm. Guide width: 30 ...
€4.954,95 €4.095,00 €4.087,80 €3.378,35
You save 18%
Scharmüller Drawbar K80 rail 330 mm, pin Ø 25 mm, 2000 kg, AGCO gray
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 2000 kg. D-value: 83,9 kN. Plate height: 175 mm. Colour: AGCO grey. Overh... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.610,53 €1.331,02 €1.356,50 €1.121,07
You save 16%
Scharmüller Drawbar K80 rail 320 mm, pin Ø 30 mm, 3000 kg, black
Scharmüller
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 190 mm. Colour: Black. Overhang:... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Load cap...
€1.392,54 €1.150,86 €1.172,90 €969,34
You save 16%
Scharmüller Drawbar manual rail width 330 mm, coupling pin 31 mm, 82,4 kN
Scharmüller
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 82,4 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€637,08 €526,51 €563,40 €465,62
You save 12%
Showing 241 - 264 of 453

Massey Ferguson 6455 parts for the PTO, electrics and hitch

If your MF 6455 spends long days driving implements through the PTO, sooner or later the PTO clutch and its switches will ask for attention. This page has more than 450 new Massey Ferguson 6455 parts from GRANIT, Scharmüller, DANA Spicer, HELLA and MAHLE.

Rebuilding the PTO clutch

The PTO clutch is covered with internal plates, external plates and adjusting plates for setting the clearance. Always replace the plates as a full pack, even if some still look usable, and soak the new plates in clean transmission oil for a while before assembly. Then measure the pack height and set the clearance with the correct adjusting plates. Too little clearance makes the clutch drag, too much lets it slip under load.

Switches, sensors and relays

The PTO is operated with push button switches, including the yellow external control on the fender. Sensors and relays make sure the signal gets through. If you suspect a relay, swap it with an identical one from another circuit. If the function then works, you have found the cause. Rocker switches, work lamps and mirrors are here as well.

Hitch, engine and fenders

At the rear there are rail-mounted drawbars. Under the bonnet there are alternators, and for the powershift and hydraulics O-rings, sealing rings and seals, including the seal for the fuel tank sensor. Fender pivots are available too, so a rattling fender can be made solid again.

With a rail-mounted drawbar, check the rail width and pin size so the new hitch fits the existing guide. If you smell diesel in or around the cab, look at the seal of the fuel sensor on top of the tank. A dried-out seal is quickly replaced and keeps dirt out of the fuel. A work lamp that mists up inside usually has a damaged seal and will not last long after that.

Picking the right part

Check the type plate to confirm it is a 6455. With clutch plates, compare the teeth and the count against the pack that comes out, and with an alternator compare the flange and plug. If there is a reference number on the old part, use it.

Within the Massey Ferguson range, this tractor sits in the 6400 line. The other models in that series each have a page of their own: Massey Ferguson 6460, Massey Ferguson 6465, Massey Ferguson 6470, Massey Ferguson 6475, Massey Ferguson 6480 and Massey Ferguson 6490. Every Massey Ferguson tractor can be reached through Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart