Menu
EUR

Massey Ferguson 6613 tractor parts & technical data

If you work with a Massey Ferguson 6613, the matching parts are already sorted here: more than 250 parts, including trailer couplings, electrics and lighting.

261 parts found for Massey Ferguson 6613
Show:
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.414,07 €1.168,65 €1.082,75 €894,83
You save 23%
HELLA Interior light K (10W), clear, 12 / 24 V, built-in
HELLA
Bulb: K (10W). Colour: Transparent. Installation location: Inner. Nominal voltage: 12 / 24 V. Switches: Yes. Test mark: E1 8728, ECE. Type: Bulb. Ligh... More
Bulb: K (10W). Colour: Transparent. Installation location: Inner. Nomi...
€15,25 €12,60
Oil pressure switch oil filter steering 12 / 24 V, with seal ring
Version: With sealing ring, operating voltage 12/24 V. Menke no.: 210021. More
Version: With sealing ring, operating voltage 12/24 V. Menke no.: 2100...
€222,19 €183,63 €211,00 €174,38
You save 5%
GRANIT Hydraulische Hubstrebe clevis / ball joint, 640 mm, Ø 92 mm
GRANIT
L (mm): 640 | C (mm): 40 | To fit: Massey Ferguson, Challenger | D (mm): 92 | Type: Gabelgelenk / Kugelgelenk | A (mm): 22 | S (mm): 45 More
L (mm): 640 | C (mm): 40 | To fit: Massey Ferguson, Challenger | D (mm...
€654,31 €540,75 €621,55 €513,68
You save 5%
GRANIT Ball joint, complete right and left 420 mm, taper 23,5 - 26,5 mm
GRANIT
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€136,27 €112,62 €129,45 €106,98
You save 5%
Force sensor pin 60 kN Massey Ferguson
€395,80 €327,11 €376,00 €310,74
You save 5%
GRANIT Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
GRANIT
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€38,15 €31,53
Pivot
€560,71 €463,40 €532,65 €440,21
You save 5%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
Eaton Thrust washer transmission Massey Ferguson, Challenger
Eaton
Reference no.: 518414M1 More
Reference no.: 518414M1
€32,90 €27,19
HELLA Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, clockwise
€371,08 €306,68 €298,35 €246,57
You save 20%
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 kg. D-value: 17,2 kN. Overhang: 80 mm. Plate height: 90 mm. Hole: M16... More
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load cap...
€561,80 €464,30
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
You save 21%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
You save 18%
Rotary switch heating and air conditioning, 5 plug connections
Version: Without knob, 5 plug connections. More
Version: Without knob, 5 plug connections.
€65,45 €54,09
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal.
€8,90 €7,36
HELLA Relays changeover contact 12 V, 30 - 40 A, with holder, 5-pin, 6,3 mm
HELLA
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm, With resistor for suppressing inductive interference voltage peaks. Colour: Bla... More
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm,...
€21,85 €18,06
GRANIT Pressure switch vacuum gauge hydraulics, right-hand cover
GRANIT
Version: Hydraulics, right-hand cover. More
Version: Hydraulics, right-hand cover.
€94,74 €78,30 €90,00 €74,38
You save 5%
GRANIT Potentiometer for accelerator and clutch pedal
GRANIT
Version: For accelerator and clutch pedal. More
Version: For accelerator and clutch pedal.
€172,34 €142,43 €163,70 €135,29
You save 5%
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
Showing 25 - 48 of 261

Massey Ferguson 6613 parts for hitch, transmission and cab

At the back of the tractor

Drawbars, drawbar frames and forced steering parts for trailers make up the hitch side of this page. Think of a black drawbar with a K80 ball on a rail, or forced steering welded at both ends with a K50 lock. Before you order a new drawbar, measure the rail width and pin diameter on the frame already fitted to your Massey Ferguson 6613. Replace a pin that has worn oval at the same time, because play in the hitch grows with every pull away.

Because so much of the work on a 6613 happens at the hitch, it pays to keep an eye on the drawbar, the drivetrain and the cab together. A rattling hitch, a clutch that bites a little later than it used to or a door that lets in draughts are often the first signs. Dealing with them early saves bigger repairs later on.

In total there are more than 250 parts here that fit the 6613. Next to GRANIT you will find components from Scharmüller, DANA Spicer, HELLA and Walterscheid.

Clutch plates and front axle shims

Further inside the tractor there are internal and external clutch plates, adjusting plates for the bevel gear in the front axle, O-rings and sealing rings. Clutch plates are always replaced as a full pack. Soak the new plates in clean transmission oil before assembly, so the lining is fully saturated before the clutch takes its first load. The adjusting plates set the backlash between pinion and crown wheel, so reuse the exact thickness you removed or measure the backlash again if bearings or housing are renewed.

Cab, cooling and sensors

For the cab there are work lamps, control knobs, gas struts and seals, including the seal around the door handle. On the cooling side you get radiator hoses and temperature sensors, one of them for the air conditioning. A radiator hose that feels hard or spongy when squeezed is ready for replacement, even if it has not started leaking.

Getting the right fit

The type plate confirms you are working on a 6613 and not a close relative. A reference number on the old part is the safest thing to compare with. The tractor is part of the Massey Ferguson 6600 series, and the other types in that series have their own pages with parts that fit them: Massey Ferguson 6614, Massey Ferguson 6615 and Massey Ferguson 6616. For older or newer machines from the same make, go to Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart