Menu
EUR

Massey Ferguson 7475 tractor parts & technical data

The Massey Ferguson 7475 belongs to the 7400 series, and this page offers more than 350 parts for it, including electrics, lighting and engine components.

394 parts found for Massey Ferguson 7475
Show:
Electric cooling fan Massey Ferguson 6475-7495
To fit as: Massey Ferguson 6480 (from engine no. N285074), 6485, 6490, 6495, 7480, 7485, 7490, 7495 (from engine no. 04-OCT-2004) More
To fit as: Massey Ferguson 6480 (from engine no. N285074), 6485, 6490,...
€497,64 €411,27 €472,75 €390,70
You save 5%
Walterscheid Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
Walterscheid
Hole pattern (mm): 140 x 80 | Colour: Black | D-value (kN): 89,3 | Guide width (mm): 30 | Hole (mm): M20 | Assembly notes: The vehicle part support di... More
Hole pattern (mm): 140 x 80 | Colour: Black | D-value (kN): 89,3 | Gui...
€790,57 €653,36 €621,15 €513,35
You save 21%
GRANIT Alternator 14 V / 150 A, flange 56 mm
GRANIT
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction of rotation: ↻ | Mounting hole Ø / R (mm): 10.3 / 90.0 | Nominal values (V /... More
Nominal voltage (V): 14 | Flange size (mm): 56.0 | Form: B | Direction...
€280,91 €232,16 €266,85 €220,54
You save 5%
DANA Spicer Wheel hub final drive front axle 730
€408,25 €337,40
DANA Spicer Axial bearing washer central housing front axle 745, 142 g
€61,09 €50,49 €58,00 €47,93
You save 5%
Sealing ring 48 x 75 x 14/17 mm Massey Ferguson
€76,67 €63,36 €72,80 €60,17
You save 5%
Universal joint 30,18 x 106,3 mm, maintenance-free
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: ...
€224,08 €185,19 €212,85 €175,91
You save 5%
GRANIT Tank cap engine cooling
€44,24 €36,56 €42,00 €34,71
You save 5%
GRANIT Valve cover gasket lower, two-piece valve cover
€36,93 €30,52 €35,00 €28,93
You save 5%
GRANIT Oil drain valve M18 x 1,5
GRANIT
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
You save 5%
ROCKINGER Drawbar K80 rail width 311 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.406,44 €1.162,35 €1.076,90 €890,00
You save 23%
GRANIT Rocker switch hydraulics linkage rear, lift / lower
GRANIT
Version: Rear power lift: lift/lower, if 3782020M2 or 4270970M2 was originally installed, 1573013524X91 must also be ordered.. More
Version: Rear power lift: lift/lower, if 3782020M2 or 4270970M2 was or...
€120,02 €99,19 €108,55 €89,71
You save 10%
HELLA Interior light K (10W), clear, 12 / 24 V, built-in
HELLA
Bulb: K (10W). Colour: Transparent. Installation location: Inner. Nominal voltage: 12 / 24 V. Switches: Yes. Test mark: E1 8728, ECE. Type: Bulb. Ligh... More
Bulb: K (10W). Colour: Transparent. Installation location: Inner. Nomi...
€15,25 €12,60
Stabilus Gas strut 220 N, 215 mm, form 8 Massey Ferguson
Stabilus
d2 (mm): 18 | Form: 8 | d1 (mm): 8 | A (mm): 215 | Newtons: 220 | B (mm): 112 | D (mm): 8,3 | C (mm): M6x2 More
d2 (mm): 18 | Form: 8 | d1 (mm): 8 | A (mm): 215 | Newtons: 220 | B (m...
€168,04 €138,88 €159,60 €131,90
You save 5%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
Scharmüller
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lock: ball 80 | Colour: Black | Description: Compatible with CNH drawbar... More
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg):...
€1.855,80 €1.533,72
SANDEN Aircon compressor 12 V, R134a, pulley Ø 112 mm, PV4 Massey Ferguson
SANDEN
Suitable oil: SP - 10 | For compressor: SD7H15 | Oil quantity (ccm): 190 | Nominal voltage (V): 12 | Reference no.: 8147 | Refrigerant: R134a | Additi... More
Suitable oil: SP - 10 | For compressor: SD7H15 | Oil quantity (ccm): 1...
€674,15 €557,15 €640,40 €529,26
You save 5%
MAHLE Starter motor with reduction 12 V, 3,2 kW, 10 teeth, Ø 89 mm, angle r 50
€502,92 €415,64 €314,30 €259,75
You save 38%
GRANIT Ball joint, complete right and left 420 mm, taper 23,5 - 26,5 mm
GRANIT
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€136,27 €112,62 €129,45 €106,98
You save 5%
Elbow exhaust Massey Ferguson 5465-7499
€814,51 €673,15 €773,75 €639,46
You save 5%
Force sensor pin 60 kN Massey Ferguson
€395,80 €327,11 €376,00 €310,74
You save 5%
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
GRANIT
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€55,61 €45,96 €52,80 €43,64
You save 5%
GRANIT Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
GRANIT
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€38,15 €31,53
Pivot
€560,71 €463,40 €532,65 €440,21
You save 5%
Showing 25 - 48 of 394

Massey Ferguson 7475 parts for the cab, electrics and turbo

The rear window of a 7475 is opened and shut many times a day when hitching, and the gas struts and catch feel it. For this tractor from the 7400 series there are more than 350 new replacement parts on this page, from GRANIT, HELLA, Scharmüller, MAHLE and DANA Spicer.

Rear window and cab fittings

Listed here are rear window gas struts, sealing rings for the rear window lock, handles and mirrors. Fit a gas strut with the rod pointing down so the internal seal stays lubricated and lasts longer. Replace struts in pairs so the window is not loaded on one side.

Charging and switches

An alternator keeps the battery charged, and relays with holders handle the circuits. On the dashboard there are rocker switches, such as the one for four-wheel drive, and push button switches. HELLA work lamps light up the area around the tractor. If a function cuts in and out, look at the relay and its holder first, since a loose blade terminal causes exactly that.

Engine and turbocharger

Engine parts include V-belts, thermostats, O-rings and gaskets, among them the one for the turbocharger oil feed line. Renew those gaskets every time the oil line is undone. When reconnecting, add a little clean oil to the turbo and let the engine idle gently first so the bearings are lubricated before you put load on it. Seals for the tank sensor are listed as well.

If the battery is not charging well, check the V-belt tension and the cable lugs before replacing the alternator. A belt that squeals on a cold start also slips under load. Do not overtighten it either, because that wears out the alternator and water pump bearings.

Towing

A replacement drawbar is available for hitching trailers.

Type plate and the rest of the 7400 series

Check the type plate to confirm it is a 7475. A reference number on the old part, for instance on the alternator or a relay, can be compared with the number shown with the product. Do not measure a used V-belt, as it will have stretched. Read the number printed on its side instead.

The other tractors in the 7400 series have their own page:

Every model of the brand is listed under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart