Menu
EUR

Massey Ferguson 7490 tractor parts & technical data

From electrics and lighting to engine parts, the Massey Ferguson 7490 in the 7400 series is covered here with more than 350 parts that fit this model.

339 parts found for Massey Ferguson 7490
Show:
GRANIT Mirror 330 x 240 mm, rod-Ø 19 mm Massey Ferguson Series 4200-8400
5%
GRANIT
Mirror 330 x 240 mm, rod-Ø 19 mm Massey Ferguson Series 4200-8400
Dimensions: 330 x 240 mm. Height: 330 mm. Width: 240 mm. Rod Ø: 19 mm.
€70,12 €57,95 €66,60 €55,04
 
Base plate fender pin Ø 25 mm Case IH, New Holland
5%
Base plate fender pin Ø 25 mm Case IH, New Holland
€118,52 €97,95 €112,55 €93,02
 
GRANIT Pivot fender bracket right Massey Ferguson
10%
GRANIT
Pivot fender bracket right Massey Ferguson
€567,36 €468,89 €513,30 €424,21
 
Spring right fender Fendt, Massey Ferguson
Spring right fender Fendt, Massey Ferguson
Version: Suitable for Fendt pivoting mudguards.
€36,40 €30,08
 
Walterscheid Ball hitch K80 311 / 22 / 30 mm, 84,3 kN
21%
Walterscheid
Ball hitch K80 311 / 22 / 30 mm, 84,3 kN
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. D-value: 84.3 kN. C...
€2.095,05 €1.731,45 €1.646,10 €1.360,41
 
ROCKINGER Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
23%
ROCKINGER
Drawbar KS80 rail width 311 mm, nose weight 3000 kg, AGCO gray Fendt
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.394,15 €1.152,19 €1.067,51 €882,24
 
GRANIT Telescopic mirror bracket right and left 550 - 840 mm
10%
GRANIT
Telescopic mirror bracket right and left 550 - 840 mm
Hole spacing: 52 mm. PCD: 10 mm. Length min./max.: 550 - 840 mm.
€181,99 €150,41 €164,65 €136,07
 
Push button switch PTO shaft, yellow, outer shifting on the fender
Push button switch PTO shaft, yellow, outer shifting on the fender
Version: Yellow button, external switch on mudguard.
€30,90 €25,54
 
HELLA Work lamp flood beam H3 55 W, 160 x 100 x 78 mm, 12 / 24 V, upright
HELLA
Work lamp flood beam H3 55 W, 160 x 100 x 78 mm, 12 / 24 V, upright
Bulb: H3. Bulbs included: Yes. Light function: Close-range illumination. Install...
€69,15 €57,15
 
Main headlights left / right 12 V, H4, built-in vrijzichtmotorkap
Main headlights left / right 12 V, H4, built-in vrijzichtmotorkap
Bulb: 12V60, 55W/H4. Installation location: Left/right. Nominal voltage: 12 V. L...
€116,95 €96,65
 
Contact switch clutch M14 x 1,5, blade connection
5%
Contact switch clutch M14 x 1,5, blade connection
Version: Thread M14 x 1.5, Mechanical with blade terminal connection.
€89,47 €73,94 €84,95 €70,21
 
Tank sender 12 volt
10%
Tank sender 12 volt
€130,21 €107,61 €117,80 €97,36
 
GRANIT Sensor pressure fuel system engine
10%
GRANIT
Sensor pressure fuel system engine
Version: Pressure sensor - fuel system.
€35,55 €29,38 €32,15 €26,57
 
GRANIT Number plate light 12V5WK / R5W
GRANIT
Number plate light 12V5WK / R5W
To fit as: Case IH 238, 248, 258, 268, 288, 433, 533, 633, 733, 833, 933, 440, 5...
€22,65 €18,72
 
Walterscheid Inner part ball 80 rail width 311 mm, pin Ø 22 mm, 3000 kg
18%
Walterscheid
Inner part ball 80 rail width 311 mm, pin Ø 22 mm, 3000 kg
Description: This product is a ball support with two locking bolts. The hitch ba...
€2.129,60 €1.760,00 €1.756,90 €1.451,98
 
HELLA Work lamp flood beam Oval 100 H3 55 W, 12 V, 165 x 105 x 74 mm
HELLA
Work lamp flood beam Oval 100 H3 55 W, 12 V, 165 x 105 x 74 mm
Bulbs included: Yes | Form: Oval | Hole spacing (mm): 120 | Light aperture (mm):...
€57,00 €47,11
 
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm...
€1.114,70 €921,24
 
External plate PTO shaft 1,8 mm, inner 98,5 mm, outer 139,1 mm
5%
External plate PTO shaft 1,8 mm, inner 98,5 mm, outer 139,1 mm
Version: Stärke = 1,8 mm innen = 98,5 mm außen = 139,1 mm 54 teeth
€16,49 €13,63 €15,65 €12,93
 
GRANIT External plate 4wd clutch 2 mm, inner 140 mm, outer 188 mm
5%
GRANIT
External plate 4wd clutch 2 mm, inner 140 mm, outer 188 mm
Version: thickness = 2 mm inner = 140 mm outer = 188 mm
€38,09 €31,48 €36,15 €29,88
 
MAHLE Alternator 14 V, 120 A, 5,53 kg Massey Ferguson
38%
MAHLE
Alternator 14 V, 120 A, 5,53 kg Massey Ferguson
Nominal voltage (V): 14 | Charging current (A): 120 | Nominal values (V / A): 14...
€461,93 €381,76 €288,70 €238,60
 
MAHLE Alternator 14 V, 120 A, flange 82 mm, form A Massey Ferguson
38%
MAHLE
Alternator 14 V, 120 A, flange 82 mm, form A Massey Ferguson
Belt width (mm) / type: - | Nominal values (V / A): 14 / 120 | Direction of rota...
€559,93 €462,75 €349,90 €289,17
 
DANA Spicer Wheel bolt final drive front axle 750, 290 g
DANA Spicer
Wheel bolt final drive front axle 750, 290 g
€19,00 €15,70
 
FEBI Electric cooling fan Massey Ferguson 6480 - 6495, 7480 - 7495
42%
FEBI
Electric cooling fan Massey Ferguson 6480 - 6495, 7480 - 7495
To fit as: Massey Ferguson 6480 (from engine no. N285074), 6485, 6490, 6495, 748...
€955,90 €790,00 €550,18 €454,69
 
FEBI Engine oil filter Ø 108 mm, height 144,2 mm, thread M24 x 1,5
59%
FEBI
Engine oil filter Ø 108 mm, height 144,2 mm, thread M24 x 1,5
€34,35 €28,39 €14,07 €11,63
 
Showing 121 - 144 of 339

Massey Ferguson 7490 parts for electrics, cooling and the cab

There is a lot of wiring on a Massey Ferguson 7490, and switches, relays and alternators are typically what starts to play up with age. More than 350 replacement parts for this 7400 series tractor are gathered on this page, from suppliers such as GRANIT, HELLA, Scharmüller, GRAMMER and MAHLE.

Tracing electrical faults

A rocker switch for four wheel drive, a push button for the PTO on the fender and relays with holders are small parts, yet a function stops working without them. Before replacing a switch, check with a meter that power is actually reaching it. A suspect relay is easiest to test by swapping it with an identical one from the same fuse box. When the problem follows the relay to its new slot, the culprit is clear.

For charging there is an alternator. Cooling is handled by an electric cooling fan and a fan clutch, and a clutch that no longer engages properly lets the engine run hot under heavy draft work.

A fan clutch is best checked with the engine cold and stopped. If the fan spins on freely by hand with no resistance at all, or has noticeable play, the clutch is worn.

Cab, linkage and ordering the right item

Work lamps, including HELLA units, light up the field after dark. Mirrors, a handle and gas struts for the rear window are here as well, along with a sealing ring for the rear window catch that keeps draughts and dust out. A tractor seat is available for operators who put in long hours.

Replace the rear window gas struts as a pair, even if only one has gone weak, since the other is just as old and will follow soon. Fit them with the piston rod pointing down so the internal seal stays lubricated.

At the rear there are drawbars, and the linkage is covered by hydraulic lifting parts. Seals and sealing rings, for instance for the tank sensor, complete the picture.

Check the identification plate to confirm it is a 7490. For switches, compare the symbol and the rocker colour, and for relays count the pins. Alternators and gaskets usually carry a reference number, so compare it with the product details before you order.

Other 7400 series models

Each of these related tractors has its own page, so you only see parts listed for that specific model:

The rest of the brand is listed under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart