Menu
EUR

Massey Ferguson 7615 tractor parts & technical data

More than 300 parts for the Massey Ferguson 7615 from the 7600 series, sorted by group, so you can go straight to trailer couplings, electrics or lighting.

331 parts found for Massey Ferguson 7615
Show:
Beacon H1 12 V, 55 W, Ø 149 mm, 285 mm, push-on pin
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. Diameter: 149 mm. Total height: 285 mm. Connection: Socket pipe. Colour: Yellow.... More
Nominal voltage: 12 V. Bulbs included: Yes. Light function: Rotating. ...
€90,28 €74,61 €81,65 €67,48
You save 10%
Walterscheid Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
Walterscheid
Hole pattern (mm): 140 x 80 | Colour: Black | D-value (kN): 89,3 | Guide width (mm): 30 | Hole (mm): M20 | Assembly notes: The vehicle part support di... More
Hole pattern (mm): 140 x 80 | Colour: Black | D-value (kN): 89,3 | Gui...
€790,57 €653,36 €621,15 €513,35
You save 21%
GRANIT Hydraulische Hubstrebe clevis / ball joint, 640 mm, Ø 92 mm
GRANIT
L (mm): 640 | C (mm): 40 | To fit: Massey Ferguson, Challenger | D (mm): 92 | Type: Gabelgelenk / Kugelgelenk | A (mm): 22 | S (mm): 45 More
L (mm): 640 | C (mm): 40 | To fit: Massey Ferguson, Challenger | D (mm...
€654,31 €540,75 €621,55 €513,68
You save 5%
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN): 97,1 | Lock: ball 80 | Load capacity (kg): 3000 | Description: Daiml... More
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-...
€3.271,95 €2.704,09
DANA Spicer Wheel hub final drive front axle 730
€408,25 €337,40
DANA Spicer Axial bearing washer central housing front axle 745, 142 g
€61,09 €50,49 €58,00 €47,93
You save 5%
Universal joint 30,18 x 106,3 mm, maintenance-free
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: Maintenance-free. More
A: 30,18 mm. B: 106,3 mm. Universal joint size: . Lubrication system: ...
€224,08 €185,19 €212,85 €175,91
You save 5%
GRANIT Valve cover gasket lower, two-piece valve cover
€36,93 €30,52 €35,00 €28,93
You save 5%
GRANIT Oil drain valve M18 x 1,5
GRANIT
Thread: M18 x 1.5. More
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
You save 5%
Tool box
€175,28 €144,86 €166,50 €137,60
You save 5%
ROCKINGER Drawbar K80 rail width 336 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Description: Manual ball hitch with height-adju... More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.414,07 €1.168,65 €1.082,75 €894,83
You save 23%
ROCKINGER Drawbar K80 rail width 311 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 105 kN. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.406,44 €1.162,35 €1.076,90 €890,00
You save 23%
HELLA Interior light K (10W), clear, 12 / 24 V, built-in
HELLA
Bulb: K (10W). Colour: Transparent. Installation location: Inner. Nominal voltage: 12 / 24 V. Switches: Yes. Test mark: E1 8728, ECE. Type: Bulb. Ligh... More
Bulb: K (10W). Colour: Transparent. Installation location: Inner. Nomi...
€15,25 €12,60
Oil pressure switch oil filter steering 12 / 24 V, with seal ring
Version: With sealing ring, operating voltage 12/24 V. Menke no.: 210021. More
Version: With sealing ring, operating voltage 12/24 V. Menke no.: 2100...
€222,19 €183,63 €211,00 €174,38
You save 5%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16, thread M20, black
Scharmüller
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg): 3000 | Lock: ball 80 | Colour: Black | Description: Compatible with CNH drawbar... More
D-value (kN): 118 | Thread: M20 | Hole (mm): M16 | Load capacity (kg):...
€1.855,80 €1.533,72
CARLISLE Master brake cylinder Fendt Ideal 7, Massey Ferguson 6614 - 7718
€831,00 €686,78 €789,45 €652,44
You save 5%
GRANIT Ball joint, complete right and left 420 mm, taper 23,5 - 26,5 mm
GRANIT
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. Taper: 23,5 - 26,5 mm. More
A: 420 mm. C: M20 x 1,5 mm. D: M22 x 1,5 mm. E: 23,5 mm. F: 26,5 mm. T...
€136,27 €112,62 €129,45 €106,98
You save 5%
Force sensor pin 60 kN Massey Ferguson
€395,80 €327,11 €376,00 €310,74
You save 5%
GRANIT Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
GRANIT
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€38,15 €31,53
Pivot
€560,71 €463,40 €532,65 €440,21
You save 5%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.364,41 €1.127,61 €1.149,20 €949,75
You save 16%
GRANIT Control panel for EHR operation (AST)
GRANIT
Version: For electronic linkage control (AST). More
Version: For electronic linkage control (AST).
€322,90 €266,86
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
Showing 25 - 48 of 331

Massey Ferguson 7615 parts for forced steering, cooling and drive

The 7615 is often seen pulling steered trailers and carrying heavy implements on the linkage. This page carries more than 300 Massey Ferguson 7615 parts: drawbars, drawbar frames, automatic hitches and hydraulic lifting struts at the rear, thermostats and sensors for the engine, and clutch plates and adjusting plates for the driveline. Brands are GRANIT, Scharmüller, Walterscheid, DANA Spicer and ROCKINGER.

Forced steering and hitching

For steered trailers there are forced steering parts such as a bar welded at both ends with a lock. You will also find rail drawbars, drawbar frames including versions for Challenger, automatic hitches and adapter plates. Every time you hitch up, check the balls and the lock on the forced steering bar. A bar that does not lock properly can let the trailer kick out in a bend. Hydraulic lifting struts are available for the three point linkage.

Engine and cooling

Under the bonnet there are thermostats and inductive transmission speed sensors, and work lamps for the cab. Always fit a thermostat with a new gasket and use the right type of coolant. If in doubt, drain fully rather than topping up with something different.

Driveline and front axle

The wet clutches, including the four wheel drive clutch, use external plates and internal plates. In the DANA Spicer front axle, adjusting plates set up the gear mesh. There are also O-rings, sealing rings and seals such as the cab door handle seal.

Hydraulic lifting struts and the PTO

A hydraulic lifting strut lets you level an implement from the seat, provided the strut holds its oil. If an implement slowly drops out of level with the engine off, the strut is often leaking internally. Check the hoses and quick couplers for dirt and leaks before replacing the strut itself, and when fitting it make sure the hoses neither stretch nor rub with the linkage fully raised or fully lowered. For the PTO there are O-rings. Renew them every time the PTO stub comes out, even if nothing was leaking, because a used ring seldom lasts long once it has been disturbed. The work lamps for the cab are worth a quick check too, as a flickering lamp is more often a corroded plug than a failed light.

Ordering the right part

The serial number on the type plate of your 7615 and the reference number on the old part give you the best certainty, and for drawbars and frames the measured rail width helps too. Every other model in the 7600 series has its own page: Massey Ferguson 7616, Massey Ferguson 7618, Massey Ferguson 7619, Massey Ferguson 7620 and Massey Ferguson 7624. All other tractors from the brand are under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart