Menu
EUR

Massey Ferguson 7615 tractor parts & technical data

More than 300 parts for the Massey Ferguson 7615 from the 7600 series, sorted by group, so you can go straight to trailer couplings, electrics or lighting.

331 parts found for Massey Ferguson 7615
Show:
GRANIT Hydraulische Hubstrebe clevis / clevis, 680 mm, Ø 90 mm
5%
GRANIT
Hydraulische Hubstrebe clevis / clevis, 680 mm, Ø 90 mm
C (mm): 45 | S (mm): 51 | S1 (mm): 39 | Type: Gabelgelenk / Gabelgelenk | L (mm)...
€685,47 €566,50 €651,15 €538,14
 
Hydraulische Hubstrebe clevis / ball joint, 620 mm, Ø 92 mm
5%
Hydraulische Hubstrebe clevis / ball joint, 620 mm, Ø 92 mm
D (mm): 92 | Type: Gabelgelenk / Kugelgelenk | A (mm): 22 | L (mm): 620 | C (mm)...
€654,31 €540,75 €621,55 €513,68
 
Scharmüller Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
Scharmüller
Schroefkogeladapter K80 3000 kg, 118 kN, bore M16 / M20, black
V-value (kN): 83 | Hole (mm): M16 / M20 | Version: Threaded ball adapter K80 | D...
€1.855,80 €1.533,72
 
Eaton Thrust washer transmission Massey Ferguson, Challenger
Eaton
Thrust washer transmission Massey Ferguson, Challenger
Reference no.: 518414M1
€32,90 €27,19
 
HELLA Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, clockwise
20%
HELLA
Starter motor 12 V, 3,0 kW, 10 teeth, Ø 89 mm, clockwise
€371,08 €306,68 €298,35 €246,57
 
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Thermostat Ø 54 mm, 80 °C Massey Ferguson, Valtra, Fendt, Challenger
Ø: 54 mm. Temperature: 80 °C.
€25,00 €20,66
 
Scharmüller Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Scharmüller
Drawbar ball 50, rail 200 mm, pin Ø 16 mm, 150 kg
Rail width: 200 mm. Guide width: 25 mm. Detent pin Ø: 16 mm. Load capacity: 150 ...
€561,80 €464,30
 
Scharmüller Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
12%
Scharmüller
Drawbar inner part 311 mm, coupling pin 38 mm, 2500 kg
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€1.160,61 €959,18 €1.026,40 €848,26
 
Scharmüller Ball 80® ball inserts gray cast iron, rail width 311 mm, 4000 kg
12%
Scharmüller
Ball 80® ball inserts gray cast iron, rail width 311 mm, 4000 kg
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000...
€1.122,52 €927,70 €992,75 €820,45
 
Walterscheid Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
21%
Walterscheid
Drawbar ball 80, rail 335 mm, pin Ø 22 mm, 3000 kg, black
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€2.361,86 €1.951,95 €1.855,70 €1.533,64
 
Scharmüller Pick-Up Hitch einsätze 80 shank 60 x 60 mm, 415 mm
12%
Scharmüller
Pick-Up Hitch einsätze 80 shank 60 x 60 mm, 415 mm
suitable for: Claas. Series: Ares 500/600. Category: Pick-up hitch. Version: bal...
€1.865,61 €1.541,83 €1.649,95 €1.363,60
 
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
18%
Walterscheid
Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 ...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
 
Rotary switch heating and air conditioning, 5 plug connections
Rotary switch heating and air conditioning, 5 plug connections
Version: Without knob, 5 plug connections.
€65,45 €54,09
 
Cobo Lamp glass right, left
Cobo
Lamp glass right, left
Installation location: Right, left.
€15,70 €12,98
 
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Relays changeover contact 12 V, 20 - 30 A, 5-pin, without bracket
Version: 12 V / 20 - 30 A, Without bracket, 5-pin, blade terminal.
€8,90 €7,36
 
HELLA Relays changeover contact 12 V, 30 - 40 A, with holder, 5-pin, 6,3 mm
HELLA
Relays changeover contact 12 V, 30 - 40 A, with holder, 5-pin, 6,3 mm
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm, With resi...
€21,85 €18,06
 
GRANIT Pressure switch vacuum gauge hydraulics, right-hand cover
5%
GRANIT
Pressure switch vacuum gauge hydraulics, right-hand cover
Version: Hydraulics, right-hand cover.
€94,74 €78,30 €90,00 €74,38
 
GRANIT Potentiometer for accelerator and clutch pedal
5%
GRANIT
Potentiometer for accelerator and clutch pedal
Version: For accelerator and clutch pedal.
€172,34 €142,43 €163,70 €135,29
 
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
23%
ROCKINGER
Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
 
GRANIT Internal plate 4wd clutch 2,5 mm, inner 119 mm, outer 178 mm
5%
GRANIT
Internal plate 4wd clutch 2,5 mm, inner 119 mm, outer 178 mm
Version: thickness = 2,5 mm inner = 119 mm outer = 178 mm
€33,37 €27,58 €31,70 €26,20
 
LED work lights spotlight 4400 lm, 56 W, 10 - 30 V, 160 x 100 x 68 mm
5%
LED work lights spotlight 4400 lm, 56 W, 10 - 30 V, 160 x 100 x 68 mm
Bulb: LED | Light colour (K): 5700 | Depth (mm): 68 | EMC: CISPR 25 class 4 | Wi...
€76,82 €63,49 €72,95 €60,29
 
Showing 49 - 72 of 331

Massey Ferguson 7615 parts for forced steering, cooling and drive

The 7615 is often seen pulling steered trailers and carrying heavy implements on the linkage. This page carries more than 300 Massey Ferguson 7615 parts: drawbars, drawbar frames, automatic hitches and hydraulic lifting struts at the rear, thermostats and sensors for the engine, and clutch plates and adjusting plates for the driveline. Brands are GRANIT, Scharmüller, Walterscheid, DANA Spicer and ROCKINGER.

Forced steering and hitching

For steered trailers there are forced steering parts such as a bar welded at both ends with a lock. You will also find rail drawbars, drawbar frames including versions for Challenger, automatic hitches and adapter plates. Every time you hitch up, check the balls and the lock on the forced steering bar. A bar that does not lock properly can let the trailer kick out in a bend. Hydraulic lifting struts are available for the three point linkage.

Engine and cooling

Under the bonnet there are thermostats and inductive transmission speed sensors, and work lamps for the cab. Always fit a thermostat with a new gasket and use the right type of coolant. If in doubt, drain fully rather than topping up with something different.

Driveline and front axle

The wet clutches, including the four wheel drive clutch, use external plates and internal plates. In the DANA Spicer front axle, adjusting plates set up the gear mesh. There are also O-rings, sealing rings and seals such as the cab door handle seal.

Hydraulic lifting struts and the PTO

A hydraulic lifting strut lets you level an implement from the seat, provided the strut holds its oil. If an implement slowly drops out of level with the engine off, the strut is often leaking internally. Check the hoses and quick couplers for dirt and leaks before replacing the strut itself, and when fitting it make sure the hoses neither stretch nor rub with the linkage fully raised or fully lowered. For the PTO there are O-rings. Renew them every time the PTO stub comes out, even if nothing was leaking, because a used ring seldom lasts long once it has been disturbed. The work lamps for the cab are worth a quick check too, as a flickering lamp is more often a corroded plug than a failed light.

Ordering the right part

The serial number on the type plate of your 7615 and the reference number on the old part give you the best certainty, and for drawbars and frames the measured rail width helps too. Every other model in the 7600 series has its own page: Massey Ferguson 7616, Massey Ferguson 7618, Massey Ferguson 7619, Massey Ferguson 7620 and Massey Ferguson 7624. All other tractors from the brand are under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart