Menu
EUR

Massey Ferguson 8240 tractor parts & technical data

Time to replace a trailer coupling or a light on the Massey Ferguson 8240? More than 350 parts for this 8200 series tractor are listed here, electrics too.

343 parts found for Massey Ferguson 8240
Show:
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Scharmüller
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Approved for steering forces up to 20 kN (2 t). Load capacity: 2 t. Load c... More
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Descrip...
€472,38 €390,40 €417,75 €345,25
You save 12%
Oil pressure switch transmission 1,3 bar, lagedrukschakelaar
Version: 1.3 bar, low pressure switch. More
Version: 1.3 bar, low pressure switch.
€120,88 €99,90 €114,80 €94,88
You save 5%
Rocker switch front work light, with illumination indicator
Version: With illumination indicator. More
Version: With illumination indicator.
€37,05 €30,62 €35,15 €29,05
You save 5%
GRANIT Push button switch hydraulics lift, outer shifting on fender
GRANIT
Version: Raise control hydraulics, External switch on mudguard. More
Version: Raise control hydraulics, External switch on mudguard.
€33,99 €28,09 €32,25 €26,65
You save 5%
GRANIT Push button switch PTO shaft red, without detent, plug connection
GRANIT
Version: Red button, with lock, Plug connection. More
Version: Red button, with lock, Plug connection.
€32,00 €26,45
GRANIT Starter switch without key, blade terminal, preheating, start
GRANIT
Version: With blade terminals, Function:, on - preheat - start, Ignition key: 5070302. More
Version: With blade terminals, Function:, on - preheat - start, Igniti...
€38,37 €31,71 €36,45 €30,12
You save 5%
GRANIT Reflector rectangular red, bonded
GRANIT
Form: Rectangular. Mounting type: Bonded. Colour: Red. Material: Plastic. More
Form: Rectangular. Mounting type: Bonded. Colour: Red. Material: Plast...
€16,10 €13,31
Cobo Glass lamp left, right
Cobo
Installation location: Right, left. More
Installation location: Right, left.
€23,95 €19,79
GRANIT Contact switch clutch M16 x 2, connection cable with plug
GRANIT
Version: Thread M16 x 2, Mechanical, connection cable with plug. More
Version: Thread M16 x 2, Mechanical, connection cable with plug.
€185,96 €153,69 €168,20 €139,01
You save 10%
Seal for tank sensor
Tank sender 12 volt
€223,25 €184,50 €212,00 €175,21
You save 5%
GRANIT Potentiometer rotary function electronic bracket
GRANIT
Version: For electronic console. More
Version: For electronic console.
€161,75 €133,68 €153,65 €126,98
You save 5%
GRANIT Sensor engine speed 12 volt
GRANIT
Version: 12 V. More
Version: 12 V.
€68,81 €56,87 €62,25 €51,45
You save 10%
GRANIT Fender bracket left complete Massey Ferguson 5425 - 8280
€592,78 €489,90 €563,10 €465,37
You save 5%
Window rubber clamping range 4 - 6 mm, h 14,5 x b 23,2 mm - 1 meter
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23,2 More
Length (m): 1 | Clamping range (mm): 4 - 6 | H (mm): 14,5 | B (mm): 23...
€10,70 €8,84
GRANIT O-ring powershift 234,54 x 3,53 mm Massey Ferguson 5425 - 6499
GRANIT
Version: Ø 234,54 x 3,53 mm More
Version: Ø 234,54 x 3,53 mm
€16,32 €13,49 €15,50 €12,81
You save 5%
GRANIT Internal plate clutch 3,5 mm, inner 124,3 mm, outer 174,3 mm
GRANIT
Version: thickness = 3,5 mm inner = 124,3 mm outer = 174,3 mm More
Version: thickness = 3,5 mm inner = 124,3 mm outer = 174,3 mm
€96,12 €79,44 €91,30 €75,45
You save 5%
GRANIT Internal plate 4-wheel drive 1,7 mm, inner 66 mm, outer 14 mm
GRANIT
Version: thickness = 1,7 mm inner = 66 mm outer = 14 mm More
Version: thickness = 1,7 mm inner = 66 mm outer = 14 mm
€43,69 €36,11 €41,50 €34,30
You save 5%
External plate forwards driving 4 mm, inner 218 mm
Version: thickness = 4 mm inner = 218 mm outer = 286/335 mm More
Version: thickness = 4 mm inner = 218 mm outer = 286/335 mm
€197,36 €163,11 €187,45 €154,92
You save 5%
GRANIT External plate PTO clutch 2,5 mm, inner 95,7 mm, outer 165 mm
GRANIT
Version: thickness = 2,5 mm inner = 95,7 mm outer = 165 mm More
Version: thickness = 2,5 mm inner = 95,7 mm outer = 165 mm
€36,06 €29,80 €34,25 €28,31
You save 5%
Internal plate PTO clutch 3,6 mm, inner 8,8 mm, outer 135 mm
Version: thickness = 3,6 mm inner = 8,8 mm outer = 135 mm More
Version: thickness = 3,6 mm inner = 8,8 mm outer = 135 mm
€24,80 €20,50
GRANIT Internal plate differential catch 2,5 mm, inner 148,8 mm
GRANIT
Version: thickness = 2,5 mm inner = 148,8 mm outer = 211 mm More
Version: thickness = 2,5 mm inner = 148,8 mm outer = 211 mm
€42,10 €34,79 €39,95 €33,02
You save 5%
Repair set clutch cylinder Massey Ferguson
€89,58 €74,03 €85,10 €70,33
You save 5%
GRANIT Internal plate PTO clutch 2,5 mm, inner 150/160 mm, outer 229 mm
GRANIT
Version: Thickness: 2.5 mm Inner: 150/160 mm Outer: 229 mm More
Version: Thickness: 2.5 mm Inner: 150/160 mm Outer: 229 mm
€103,72 €85,72 €98,50 €81,41
You save 5%
Showing 241 - 264 of 343

Massey Ferguson 8240 parts for the PTO clutch, cab and hitch

A slipping PTO is one of the classic jobs on a Massey Ferguson 8240, which is why inner and outer plates for the PTO clutch sit on this page next to more than 350 other parts that fit this tractor. They come from GRANIT and from makers such as Scharmüller, Cobo, HELLA and GRAMMER, and cover the engine bay, the cab, lighting and the rear hitch.

What you can fit to an 8240

  • Driveline and engine: PTO clutch plates, starter motors, thermostats and O-rings, for example for the feed pump.
  • Sealing: seals and sealing rings, such as a seal for the tank sensor and a sealing ring for the rear window lock.
  • Cab: gas struts for the rear window, mirrors, tractor seats, contact switches and push buttons.
  • Lighting: work lamps from HELLA and others, including a square built-in spotlight.
  • Hitching: drawbars for the hitch rail and bushes for the split pin lock.

Rebuilding the PTO clutch properly

Once the clutch housing is open, replace the inner and outer plates as a full pack. Fitting a fresh friction plate against a worn, heat-blued steel plate means it runs hot again and the PTO starts slipping under heavy load. Lay every steel plate on a flat bench and check that it sits true. While you are in there, renew the O-rings and sealing rings in that area too, so a small weep does not send you back into the housing a month later.

If the engine does not crank when you turn the key, do not condemn the starter straight away. A worn contact switch gives exactly the same symptoms. With a multimeter, check whether voltage reaches the starter signal wire with the key in the start position. If nothing arrives, the fault lies in the switch or the wiring and the starter can stay where it is. The two gas struts on the rear window age at the same rate, so change them as a pair. A single new strut pushes the glass open unevenly and strains the hinges. When fitting a new HELLA work lamp, look at the plug as well and protect the pins with a little contact grease.

Matching the part to your tractor

The type plate on the tractor tells you exactly which 8240 you are working on. For a thermostat, starter or switch, your best clue is the number stamped on or stuck to the old part. Compare it with the product details on this page. For clutch plates, measure the thickness and the inner and outer size of the old plate with a caliper before ordering.

Other tractors in the 8200 series

If the 8240 shares the yard with another model from the same series, order through that tractor's own page so you only see the parts recorded for it:

Every other model page for the brand is gathered on Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart