Menu
EUR

New Holland TM120 tractor parts & technical data

Trailer couplings, electrics and lighting are a sample of the more than 250 parts for the New Holland TM120, a tractor from the TM Series.

293 parts found for New Holland TM120
Show:
HELLA Alternator 14 V, 120 A, pulley Ø 67 mm, 8 grooves
HELLA
Charging current (A): 120 | Nominal voltage (V): 14 | Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 67 | Nominal values (V / A):... More
Charging current (A): 120 | Nominal voltage (V): 14 | Additional infor...
€484,53 €400,44 €389,56 €321,95
You save 20%
MAHLE Starter motor 12 V, 3,6 kW, 10 teeth, clockwise, mounting Ø 92,0 mm
€512,57 €423,61 €320,30 €264,71
You save 38%
GRANIT Starter motor 12V 3,1 kW, 10 teeth clockwise, 257,5 mm
€288,92 €238,78 €274,45 €226,82
You save 5%
GRANIT Seal kit hydraulic steering New Holland TM115-TM190
€122,61 €101,33 €116,45 €96,24
You save 5%
Ball joint taper 24 - 26 mm, length 100 mm, M20 x 1,5, M24 x 1,5
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper: 24 - 26 mm. More
A: 100 mm. C: M20 x 1,5 mm. D: M24 x 1,5 mm. E: 24 mm. F: 26 mm. Taper...
€57,46 €47,49 €54,55 €45,08
You save 5%
Track rod A 1610 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 40 mm. More
A: 1610 mm. B: M18 x 1,5 mm. C: 18 - 20 mm. G: . D: M18 x 1,5 mm. E: 4...
€179,61 €148,44 €170,60 €140,99
You save 5%
LUK Torsion damper 14 teeth, 35X40 Case IH, Steyr, New Holland
LUK
Number of teeth: 14. Tooth profile: 35x40. More
Number of teeth: 14. Tooth profile: 35x40.
€695,75 €575,00 €660,95 €546,24
You save 5%
GRANIT Master brake cylinder mineral oil Fiat, Case IH, Ford, New Holland
€162,60 €134,38 €154,45 €127,64
You save 5%
GRANIT Sealing ring hand brake brake piston 329,6 x 336,4 x 3,4 mm
€60,42 €49,93 €57,35 €47,40
You save 5%
ROCKINGER Drawbar KS80 rail 336 mm, pin Ø 22 mm, 4000 kg, black
ROCKINGER
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 100 kN. Colour: Black. Lock: KS80. Menke no.: 67134. More
Rail width: 336 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.682,20 €1.390,25
Retaining clamp exhaust New Holland TM120-TM155, Case IH MXM 120-155
€128,51 €106,21 €122,00 €100,83
You save 5%
GRANIT Silencer New Holland TM120-TM155, Case IH MXM 120-155
€235,25 €194,42 €223,45 €184,67
You save 5%
GRANIT Tank cap thread 45 mm, for expansion tank
GRANIT
Version: Thread: 45 mm, For expansion tank. More
Version: Thread: 45 mm, For expansion tank.
€16,00 €13,22
GRANIT V-belt water pump Case IH MXM 120-190, New Holland TM120-TM190
GRANIT
Version: For water pump. More
Version: For water pump.
€55,85 €46,16 €53,00 €43,80
You save 5%
Optibelt Multi-rib belt 8 ribs New Holland TM120-TM190, Case IH MXM 120-190
€77,32 €63,90 €73,45 €60,70
You save 5%
Foot throttle cable A 1250 mm, B 1100 mm New Holland, Fiat, Ford
€73,33 €60,60 €69,65 €57,56
You save 5%
Crankshaft seal rear Ø 122 x 141 x 13 mm Case IH, New Holland
Outer Ø: 142 mm. Width: 10 / 15 mm. Inner Ø: 122 mm. Material: FPM (fluoro rubber). More
Outer Ø: 142 mm. Width: 10 / 15 mm. Inner Ø: 122 mm. Material: FPM (...
€60,08 €49,65 €57,00 €47,11
You save 5%
Connecting rod bearing Ø 69,8 mm, width 32 mm
Dimensions: Ø 69.8 mm, Width 32 mm. More
Dimensions: Ø 69.8 mm, Width 32 mm.
€39,40 €32,56
Bosch/Rexroth Hydraulic pump clockwise 19 cm³/rpm., taper 1:8, Ø 17,46 mm
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction of rotation: Right. Line connection suction side: Ø 40mm, 4-Loch, M8. Line conn... More
Output volume: 19 cc/rev. Drive shaft: Taper 1:8, Ø 17.46. Direction ...
€417,97 €345,43 €397,00 €328,10
You save 5%
GRANIT Door lock, right Case IH JX 70U, MXM 190, New Holland T5030, TS115
€211,65 €174,92 €201,00 €166,12
You save 5%
Sealing ring lift arm shaft 32,5 x 49 x 14 mm Fiat, Ford, New Holland
Dimensions: 32.5 x 49 x 14 mm. More
Dimensions: 32.5 x 49 x 14 mm.
€18,65 €15,41
O-ring for piston 104 x 5 mm Fiat, Ford, New Holland
Dimensions: 104 x 5 mm. More
Dimensions: 104 x 5 mm.
€17,15 €14,17
Showing 145 - 168 of 293

New Holland TM120 parts

Sensors and switches first

When a TM120 throws up a warning that does not match how the tractor is behaving, a sensor or switch is usually the first suspect. This page has more than 250 New Holland TM120 parts from GRANIT, Scharmüller, ROCKINGER, Cobo and MAHLE, and the electrical side is well covered: transmission oil temperature sensors, oil pressure switches for the Full Power Shift with cable and plug, and relays. Before replacing anything, measure the resistance or switching point and inspect the connector. A pin with green corrosion produces exactly the same fault as a failed sensor.

Hitch and drawbar

At the rear you will find automatic drawbars, Piton Fix hitches and height adjustable adapter plates. Check the locking pin on a piton hitch regularly. If it is worn or no longer locks fully home, replace it straight away, because everything you tow depends on it. A height adjustable adapter plate lets you set the hitch to suit the trailer you pull every day, so the drawbar runs as level as possible.

Engine, fuel and cab

Around the engine there is the exhaust manifold gasket to the turbocharger, seal kits, O-rings, sealing rings and fan clutches. If the fan spins freely by hand with the engine hot, the fan clutch is no longer engaging and the engine will run hot under heavy work. If it stays locked all the time, you will hear the roar and see it in fuel use. With the manifold gasket, always use new nuts and replace any corroded studs, otherwise the joint at the turbo will start blowing again. There are tank caps with ventilation too. A blocked tank vent pulls a vacuum in the tank and the engine starts to stumble under load, which is easy to mistake for a fuel filter problem.

In the cab there are gas struts for the rear window, headlights and air suspended tractor seats, a worthwhile upgrade for anyone spending long days on the TM120.

Matching the right part

Start with the type plate and serial number of your TM120. With the old part in your hands, the reference number stamped or printed on it is the surest route. Other tractors in the TM series each have a page of their own:

The rest of the brand is listed under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart