Menu
EUR

New Holland TD5.85 tractor parts & technical data

Brakes, transmission, electrics or a trailer coupling for the New Holland TD5.85? You will find it among the more than 180 parts for this model.

184 parts found for New Holland TD5.85
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€295,17 €243,94 €280,40 €231,74
You save 5%
GRANIT Seal kit
€48,21 €39,84 €45,75 €37,81
You save 5%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.527,62 €1.262,50 €1.451,20 €1.199,34
You save 5%
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€980,10 €810,00 €931,00 €769,42
You save 5%
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.390,39 €1.149,08 €1.171,10 €967,85
You save 16%
ROCKINGER Drawbar inner part 310 mm, coupling pin 31,5 mm, 2000 kg
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Drawba... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.004,91 €830,50 €807,90 €667,69
You save 20%
SANDEN Aircon compressor 12 V, R134a, pulley Ø 112 mm, PV6
SANDEN
Refrigerant: R134a | For compressor: SD7H15 | Reference no.: 6113 | Fixing: DM | Pulley Ø (mm): 112 | Nominal voltage (V): 12 | No. of grooves: 6 | S... More
Refrigerant: R134a | For compressor: SD7H15 | Reference no.: 6113 | Fi...
€638,13 €527,38 €606,20 €500,99
You save 5%
ROCKINGER Drawbar without sensor rail 310 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.075,69 €889,00 €864,85 €714,75
You save 20%
ROCKINGER Drawbar K80 rail width 310 mm, locking pin Ø 22 mm
ROCKINGER
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 4000 kg. D-value: 102 kN. Load capacity: 4 t. Ball Ø: 80 mm. Lock: KS80. More
Rail width: 310 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load cap...
€1.440,75 €1.190,70 €1.103,20 €911,74
You save 23%
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.124,41 €1.755,71 €1.669,15 €1.379,46
You save 21%
LUK Clutch kit flywheel 2 mm raised double plate connection
LUK
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458228009810, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
€582,87 €481,71 €553,70 €457,60
You save 5%
ROCKINGER Drawbar automatic 48,7 mm, 330 / 25 / 32 mm, 2000 kg, 93,6 kN
€2.688,62 €2.222,00 €2.161,65 €1.786,49
You save 20%
ROCKINGER Piton Fix hole pattern 160 x 100 mm, bore M21, 3000 kg, 98,1 kN
ROCKINGER
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D-value: 98,1 kN. Hole: M21 mm. No. of holes: 4. Colour: Black. More
Lock: Piton Fix. Hole pattern: 160 x 100 mm. Load capacity: 3000 kg. D...
€1.079,32 €892,00 €867,75 €717,15
You save 20%
GRANIT Glow plug 12 V, thread 1/2 inch BSP
GRANIT
Version: 12 V, thread 1/2" BSP. More
Version: 12 V, thread 1/2" BSP.
€25,70 €21,24
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 102 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 102 kN. Description: Piton-Fix with manual lock and hei... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.441,35 €1.191,20 €1.158,80 €957,69
You save 20%
LUK Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
LUK
Contents: Pressure plate 458228013610, clutch plate 458328033210 More
Contents: Pressure plate 458228013610, clutch plate 458328033210
€996,07 €823,20 €901,20 €744,79
You save 10%
GRANIT Ball joint 540 mm, M14 x 1,5, 20 mm
GRANIT
A: 540 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 540 mm. C: M14 x 1,5 mm. D: 20 mm. E: 16,2 mm. F: 18,3 mm. Taper: 1...
€57,66 €47,65 €54,75 €45,25
You save 5%
PTO shaft end piece 260 mm Ford, Fiat, New Holland
Version: Length 260 mm. More
Version: Length 260 mm.
€105,50 €87,19 €100,20 €82,81
You save 5%
GRANIT Tank cap thread Ø 77 / 82 mm, tank collar Ø 80 mm
GRANIT
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm. More
Thread Ø mm: 77 / 82. Filler neck Ø: 80 mm.
€33,70 €27,85
GRAMMER Compacto COMFORT S MSG93/511 air suspended 12 V, seat width 400 mm
GRAMMER
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 400 mm. Fore/aft isolator: Optional.... More
Suspension: Air suspension. Upholstery type: PVC. Seat contact switch:...
€1.135,80 €938,68
Hydraulic top link cat. 2, 700 - 1036 mm, stroke 336 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 700 / 1036 mm. Piston rod Ø D: 35 mm. Cylinder Ø inner E: 70 mm. Check valve: Top. Lifting force: 6 t. Tensil... More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 700 / 1036 mm. Piston rod Ø D:...
€676,86 €559,39 €612,35 €506,07
You save 10%
ROCKINGER Drawbar without sensor rail 330 mm, coupling pin 38 mm, black
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 120,0 kN. Colour: Black. Descrip... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.014,60 €838,51 €776,85 €642,02
You save 23%
ROCKINGER Trailer coupling without manual plug rail 330 mm, 2000 kg
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31,5 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€905,38 €748,25 €727,90 €601,57
You save 20%
ROCKINGER Drawbar K80 rail width 330 mm, locking pin Ø 25 mm
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 102 kN. Description: Manual ball hitch with height-adju... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.231,99 €1.018,17 €990,51 €818,60
You save 20%
Showing 1 - 24 of 184

New Holland TD5.85 parts

Play in the steering, an engine that runs hot or a PTO that no longer engages cleanly are complaints most TD5.85 owners meet sooner or later. This page holds more than 180 parts that fit the tractor, from GRANIT, ROCKINGER, LUK, GRAMMER and Eaton.

Driveline, PTO and clutch

For the driveline there are gear wheels for the gearbox, shafts such as the PTO input shaft, sealing rings and thrust bearings. Clutch plates and complete clutch kits cover the clutch itself.

Steering and front axle

Ball joints and track rods are the steering parts that wear first. Have someone turn the wheel back and forth while you watch each joint. If the housing moves relative to the pin, the joint is due. After replacing a track rod or ball joint, always reset the toe-in, or the front tyres will wear out quickly.

Cooling and charging

Radiators and cooling fans keep engine temperature in check. A radiator clogged on the outside with chaff and dust cools poorly, so blow it out regularly from the inside outwards. Alternators are available too.

Hitch and seat

At the rear there are automatic drawbars and Piton Fix parts. In the cab, seats such as the Compacto and gas struts look after comfort.

Replacing gears and shafts

When a gear in the gearbox has to be replaced, inspect the gear it meshes with as well. Damaged teeth on one side nearly always leave marks on the other. While the box is open, clean the magnetic drain plug and look at what it has collected. Fine paste is normal, but larger flakes of metal point to a problem that has not been found yet. Renew any sealing rings and thrust bearings you come across on the way, so a minor leak never forces you to strip the box a second time.

Making sure it fits your TD5.85

Read the type plate first so you know for certain the tractor is a TD5.85. For gear wheels and shafts, the reference number on the old part is the safest point of comparison. If it can no longer be read, count the teeth and check them against the product details.

Within the New Holland range, this tractor belongs to the TD5 line-up. The other models in that series have pages of their own:

For tractors from other New Holland ranges, go to the overview of all New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart