Brake parts, trailer couplings or steering components for the New Holland TD5.95? Choose from more than 170 parts for this TD5 series model here.
The TD5.95 is a tractor people keep running for a long time, and that means the driveline eventually needs attention. This page lists more than 170 replacement parts that fit it, from GRANIT, ROCKINGER, LUK, Eaton and Walterscheid.
For the main clutch there are clutch plates, thrust bearings and pilot bearings. Once the tractor is split, change all three together. A rough pilot bearing left in place will hum every time you press the pedal, and nobody wants to split the tractor twice. Slide the new plate onto the input shaft before fitting to make sure the splines run freely, then centre it with an alignment tool before tightening the pressure plate. If the flywheel face shows scoring or blue heat spots, have it skimmed before the new plate goes on.
The gearbox side covers gear wheels for the transmission, shafts for the PTO input and sealing rings for the piston. Pitting or chipped edges on the tooth faces are a sign to check the mating gear as well. Give new piston sealing rings a light coat of oil before fitting, so they slide in without catching on an edge and tearing.
Check the rating plate and note the serial number, then hold the reference number from the old part against the product details. The TD5.95 belongs to the TD5 series, and the two other models in that line have their own pages: New Holland TD5.75 and New Holland TD5.85. That way every tractor on the farm gets parts chosen for that exact model. All models of the brand are gathered under New Holland parts.