Menu
EUR

New Holland TN75 tractor parts & technical data

The New Holland TN75 from the TN series has its own page here with more than 200 parts. Browse electrics, steering and front axle parts, couplings and more.

230 parts found for New Holland TN75
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.616,17 €1.335,68 €1.271,24 €1.050,61
You save 21%
LED main headlight oval 155 x 102 x 80,5 mm, H4, 12/24 V, built-in
Additional information: Theoretical/effective luminous flux: Dipped beam: 2000/1400 lm Full beam: 4500/3000 lm [email protected] [email protected] [email protected] [email protected]... More
Additional information: Theoretical/effective luminous flux: Dipped be...
€113,61 €93,89 €104,52 €86,38
You save 8%
ROCKINGER Trailer coupling hitch pin 30,6 mm, rail 330 mm, 2000 kg, black
ROCKINGER
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 40 mm, DIN 11043 40 mm, DIN 74054 40 mm | D-value (kN): 120,0 | Type: RO 850 D | ... More
Rail width (mm): 330 | Guide width (mm): 32 | Drawbar eye: DIN 11026 4...
€1.126,27 €930,80 €917,77 €758,49
You save 19%
GRAMMER Seat Compacto Basic S MSG83/511, mechanical, PVC, 400 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 227 mm. Seat width: 400 mm. Fore/aft isolator: Optional. Sea... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.054,87 €871,79 €970,48 €802,05
You save 8%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
You save 5%
Donaldson Maintenance switch air filter electric, 2 blade connections
Donaldson
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade terminals | Type: Electrical More
Donaldson no.: X770062 | Version: Differential pressure switch 2 blade...
€35,42 €29,27 €32,59 €26,93
You save 8%
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€183,54 €151,69 €168,86 €139,55
You save 8%
Filter dryer 267 mm, Ø 76 mm, #6 3/8 o-ring, connection thread M/F
Length (mm): 267 | Material: Steel | Connection thread: M/F | Thread: #6 3/8 O-ring | Outer Ø (mm): 76 | Weight (g): 900 | Dimensions (mm): - | Press... More
Length (mm): 267 | Material: Steel | Connection thread: M/F | Thread: ...
€48,88 €40,40 €44,97 €37,17
You save 8%
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€30,45 €25,17
GRAMMER Seat Compacto Basic M MSG83/521, mechanical, PVC, 450 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 225 mm. Seat width: 450 mm. Fore/aft isolator: Optional. Res... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€1.022,73 €845,23 €940,91 €777,61
You save 8%
Walterscheid Ball hitch K80 330 / 25 / 32 mm, 2800 kg, 97,1 kN
Walterscheid
Quick height adjustment with rotation lock, load capacity up to 40 km/h 2800 kg, from 40 km/h 2,000 kg. More
Quick height adjustment with rotation lock, load capacity up to 40 km/...
€2.111,26 €1.744,84 €1.719,18 €1.420,81
You save 19%
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.157,46 €956,58 €1.064,86 €880,05
You save 8%
Expansion valve airco 1/2 inch - 3/8 inch o-ring, 195 g
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipment: O-ring | Connection thread A: # 8, 1/2"" O-ring | Weight (g): 195 More
Connection thread: M | Connection thread E: # 6, 3/8"" O-ring | Equipm...
€57,45 €47,48 €52,85 €43,68
You save 8%
Mirror Case IH, New Holland
€54,37 €44,93 €50,02 €41,34
You save 8%
LED main headlight square 155 x 102 x 80,5 mm, H4, two installation options
Power consumption (W): Abblendlicht: 25W (25W x 1 LED) Fernlicht: 50W (25W x 2 LED) Positionslicht: 9W (0.5W x 18 LED) | Bulb: LED | Installation loca... More
Power consumption (W): Abblendlicht: 25W (25W x 1 LED) Fernlicht: 50W ...
€113,13 €93,50 €104,08 €86,02
You save 8%
Planetary gear transmission 22 / 12 teeth Fiat, New Holland
Number of teeth: 22/12. More
Number of teeth: 22/12.
€67,05 €55,41 €61,69 €50,98
You save 8%
MANN-FILTER Secondary filter main insert C14101, C14202/1, C14210/2
MANN-FILTER
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77 mm. D: 82 mm. MANN no.: CF850/2. H: 318 mm. Fleetguard no.: AF25484. Menke no.:... More
Height: 318 mm. Outer Ø: 79 / 82 mm. Inner Ø: 77 mm. A: 79 mm. B: 77...
€33,70 €27,85
Sealing ring lift arm shaft 23 x 37 x 11 mm Ford, Case IH, Fiat, New Holland
Dimensions: 23 x 37 x 11 mm. More
Dimensions: 23 x 37 x 11 mm.
€25,23 €20,85
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.422,99 €1.176,02 €1.297,49 €1.072,31
You save 9%
Cobo Contact switch mechanical brake light, clutch, PTO shaft, 12 / 24 V
Cobo
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, power rating: 12 V: 5-12 A, 24 V: 3-8 A, protection class: IP67, NC = normally close... More
Version: For brake light, clutch, four-wheel drive, PTO, 12/24 V, powe...
€32,65 €26,98 €30,04 €24,82
You save 8%
Stabilus Gas strut hood 820 N, 445 mm, stroke 179 mm
Stabilus
d2 (mm): 19 | To fit: Hood | Newtons: 820 | Form: 6 | d1 (mm): 8 | Stroke (mm): 179 | A (mm): 445 More
d2 (mm): 19 | To fit: Hood | Newtons: 820 | Form: 6 | d1 (mm): 8 | Str...
€65,25 €53,93 €60,03 €49,61
You save 8%
Expansion valve 3/8 - 5/8 inch o-ring
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connection thread A: # 10, 5/8"" O-ring More
Equipment: O-ring | Connection thread E: # 6, 3/8"" O-ring | Connectio...
€48,74 €40,28 €44,84 €37,06
You save 8%
Steering rod 1030 mm, M20 x 1, taper 18 - 20 mm
G (mm): 18 - 20 | E (mm): 28 | B (mm): M20 x 1 | D (mm): M20 x 1 | F (mm): 20,6 | C (mm): 18 - 20 | A (mm): 1030 More
G (mm): 18 - 20 | E (mm): 28 | B (mm): M20 x 1 | D (mm): M20 x 1 | F (...
€220,06 €181,87 €202,46 €167,32
You save 8%
LED work light round 12/24 V, 45 W, 3000 lm
Cable length (mm): 120 | Operating temperature (°C): -40°C / +50°C | Dimensions W x H x D (mm): Ø 114 x 71 | EMC: CISPR 25 class 3 | Light functio... More
Cable length (mm): 120 | Operating temperature (°C): -40°C / +50°C ...
€74,24 €61,36 €68,30 €56,45
You save 8%
ROCKINGER Adapter plate rail width 330 mm, 93,6 kN, 2500 kg, 160 x 100 mm
ROCKINGER
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | Detent pin Ø (mm): 25 | D-value (kN): 93,6 | Load capacity (kg): 2500 | Rail wi... More
Colour: Black | Hole pattern (mm): 160 x 100 | Guide width (mm): 32 | ...
€651,63 €538,54 €627,60 €518,67
You save 4%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.207,08 €997,59 €954,33 €788,70
You save 21%
Steering cylinder New Holland T4.75-T4.105, T5.85-T5.110, TN60-TN85
€460,61 €380,67 €423,76 €350,22
You save 8%
Cobo Indicator/position light left square, 580 mm cable New Holland
Cobo
Cable length (mm): 580 | Installation location: Left | Light function: With indicator light, with position light | Cable length (m): 0.58 | Form: Squa... More
Cable length (mm): 580 | Installation location: Left | Light function:...
€177,02 €146,30 €162,86 €134,59
You save 8%
Eaton PTO shaft end piece Case IH, Fiat, Ford, New Holland, Steyr
Eaton
Reference no.: 5185602 More
Reference no.: 5185602
€196,97 €162,79 €181,21 €149,76
You save 8%
BOSCH Micro relays 12 V / 30 - 20 A, 5-pin, 6,3 mm blade connection
BOSCH
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 mm More
Version: 12 V / 30 - 20 A Without bracket, 5-pin, blade terminal 6.3 m...
€11,20 €9,26
Filter dryer Ø 62 mm, 203 mm, connection thread F/M 3/8 inch
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 62 | Length (mm): 203 | Weight (g): 400 | Connection thread E: 3/8"" | Dimensions... More
Connection thread A: 3/8"" | Connection thread: F/M | Outer Ø (mm): 6...
€58,64 €48,46 €53,95 €44,59
You save 8%
LUK Clutch kit without bearing Case IH, New Holland, Steyr
LUK
Contents: Pressure plate 458128043410, clutch plate 458328033210 More
Contents: Pressure plate 458128043410, clutch plate 458328033210
€664,15 €548,88 €611,02 €504,97
You save 8%
Pilot bearing 17 x 47 x 14 mm
Dimensions (mm): 17 x 47 x 14 More
Dimensions (mm): 17 x 47 x 14
€6,59 €5,44
FEBI Thermostat Ø 54 mm, 79 °C Ford, Case IH, Fiat, Steyr, New Holland
FEBI
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100, TN 55, 65, 70, 75, 80, 90, 95, L 60, 65, 75, 85, 95 More
To fit as: New Holland TD 55D, 65D, 75D, 85D, 95D, TL 70, 80, 90, 100,...
€30,67 €25,35 €15,73 €13,00
You save 49%
MAHLE Gear reduction starter 12 V, 4,2 kW, 9 teeth, Ø 110 mm, clockwise
€639,84 €528,79 €383,22 €316,71
You save 40%
Internal plate differential 1,6 mm, inner 44 mm, outer 71,7 mm
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth More
Version: Thickness: 1.6 mm Inner: 44 mm Outer: 71.7 mm 22 teeth
€14,85 €12,27
MAHLE Air conditioning compressor 12 V, pulley Ø 132 mm, 2 grooves, EM, H/TO
MAHLE
Nominal voltage (V): 12 | Additional information: With sealing ring | Connection: H/TO | Pulley Ø (mm): 132 | Suitable oil: PAG 100 | Fixing: EM | Re... More
Nominal voltage (V): 12 | Additional information: With sealing ring | ...
€521,39 €430,90 €312,29 €258,09
You save 40%
Steering cylinder Case IH, New Holland, Steyr
Reference no.: 5178707 More
Reference no.: 5178707
€1.235,67 €1.021,21 €1.136,82 €939,52
You save 8%
Bosch/Rexroth Hydraulic pump 22,5 cm³/rpm. anticlockwise Case IH, Fiat, New Holland
Bosch/Rexroth
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 22,5 More
Drive shaft: Taper 1:8, Ø 17.46 | Bosch no.: 0510725384 | Direction o...
€536,54 €443,42 €493,62 €407,95
You save 8%
As PTO shaft 540 / 750 rpm. Case IH, New Holland, Steyr
€429,67 €355,10 €395,30 €326,69
You save 8%
Double clutch 280KGS6, 35 x 40, 14 splines, 327 mm
Dimensions (mm): 35 x 40, 14 grooves | Additional information: Made in Germany More
Dimensions (mm): 35 x 40, 14 grooves | Additional information: Made in...
€700,13 €578,62 €644,12 €532,33
You save 8%
Pin for differential gear Fiat, New Holland
€41,68 €34,45 €38,35 €31,69
You save 8%
ROCKINGER Piton Fix rail width 330 mm, locking pin Ø 25 mm, 4000 kg, 89,3 kN
ROCKINGER
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 89,3 kN. Description: Manual Piton-Fix with elevator be... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.363,65 €1.126,98 €1.100,67 €909,64
You save 19%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Steering cylinder New Holland TN55 - TN85
Reference no.: 5175755 More
Reference no.: 5175755
€759,60 €627,77 €698,83 €577,55
You save 8%
Cobo Rear light right 225 x 175 x 60 mm, 12 / 24 V Case IH, New Holland
Cobo
Bulb: 12V10WK / R10W 12V21WK / P21W | Type: Bulb | Light function: Indicator light, rear light, brake light | Test mark: ECE | Form: Rectangular, all ... More
Bulb: 12V10WK / R10W 12V21WK / P21W | Type: Bulb | Light function: Ind...
€56,13 €46,39
Showing 1 - 48 of 230

New Holland TN75 parts for clutch, steering and hydraulics

The New Holland TN75 is a narrow workhorse that clocks up hours between rows, in livestock buildings and around the yard. All that shifting and turning leaves its mark on the clutch, the steering and the hydraulics. This page carries more than 200 New Holland TN75 tractor parts from GRANIT, Cobo, GRAMMER, LUK and HELLA.

Clutch and driveline

For the TN75 there is a double clutch pressure plate, along with thrust bearings for the driving clutch. If the tractor is split anyway, replace the clutch and the thrust bearing in one go and take a look at the flywheel while you are there. Grooves or blue spots on the friction face mean it needs resurfacing first, otherwise the new clutch will slip or judder. A contact switch for the gear lever and a gasket for the rear engine cover belong to the same job.

Steering and hydraulics

A steering cylinder, a hydraulic pump, lifting shaft seals and seal kits keep the steering and the rear linkage dry. A tip for the lifting shaft: smooth and clean the shaft before the new seal goes on and wet the lip with a little oil. A dry lip or a burr on the shaft and the new seal will be weeping again within days.

Electrics and driver's seat

Alternators, relays and oil pressure switches cover the electrical side, and there is a separate O-ring for the thermostat. On the operator platform a GRAMMER Compacto seat fits, and at the rear there is a drawbar and Piton Fix.

  • clutch pressure plate and thrust bearing
  • steering cylinder and hydraulic pump
  • lifting shaft seals
  • alternator, relays and switches
  • seat, drawbar and Piton Fix

An oil pressure light that flickers at idle with a warm engine does not always mean a faulty switch. Check the actual pressure with a separate gauge first. If that reads fine, the switch is to blame and replacing it takes minutes. With the alternator, confirm it is charging with the engine running and check that the drive belt is tight, as a slipping belt can look just like a failed alternator.

Choosing the right part

The type plate confirms that you are dealing with a TN75. If a clutch plate or seal still shows a number, that is the surest comparison, so read it off before the old part goes in the scrap bin.

Within the TN series the New Holland TN95 has its own page too. Other New Holland models are reachable through New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart