Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

New Holland T5.85 tractor parts & technical data

Servicing a New Holland T5.85 starts with the right part. This page lists more than 50 parts for steering and front axle, brakes, transmission and electrics.

54 parts found for New Holland T5.85
Show:
Scharmüller Drawbar K80 rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120 kN. Plate height: 160 mm. Colour: Black. Overhang: ... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.616,17 €1.335,68 €1.271,24 €1.050,61
You save 21%
SANDEN Aircon compressor 12 V, R134a, pulley Ø 112 mm, PV6
SANDEN
Refrigerant: R134a | For compressor: SD7H15 | Reference no.: 6113 | Fixing: DM | Pulley Ø (mm): 112 | Nominal voltage (V): 12 | No. of grooves: 6 | S... More
Refrigerant: R134a | For compressor: SD7H15 | Reference no.: 6113 | Fi...
€665,89 €550,32 €612,62 €506,30
You save 8%
LUK Thrust bearing PTO clutch 75 x 115 x 20 mm
LUK
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€183,54 €151,69 €168,86 €139,55
You save 8%
Scharmüller Automatic hitch adjustable, rail 390 mm, pin 31 mm, 120 kN
Scharmüller
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail width (mm): 390 | Detent pin Ø (mm): 25 | Load capacity (kg): 2500 | Descripti... More
Lock: Automatic | Connecting pin (mm): 31 | D-value (kN): 120,0 | Rail...
€1.157,46 €956,58 €1.064,86 €880,05
You save 8%
Thrust bearing single PTO clutch 75 x 115 x 20 mm
Dimensions (mm): 75 x 115 x 20 More
Dimensions (mm): 75 x 115 x 20
€30,45 €25,17
Wabco Air dryer cartridge M39 x 1,5, Ø 136 mm, height 165 mm, exchange
Wabco
Additional information: Recommended maintenance interval (under normal conditions): 1 year | A (mm): 136 | Outer Ø (mm): 136 | H (mm): 165 | Height (... More
Additional information: Recommended maintenance interval (under normal...
€40,88 €33,79 €37,61 €31,08
You save 8%
Airco compressor 12 V, R 134a, pulley Ø 112 mm, PV6, 190 ccm oil
Suitable oil: PAG 46 | Fixing: DM | Nominal voltage (V): 12 | Cylinder capacity (cm³): 154,8 | Oil quantity (ccm): 190 | Pulley Ø (mm): 112 | Refrig... More
Suitable oil: PAG 46 | Fixing: DM | Nominal voltage (V): 12 | Cylinder...
€489,09 €404,21 €449,96 €371,87
You save 8%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 160 mm. Colour: Black. Overhang:... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.422,99 €1.176,02 €1.297,49 €1.072,31
You save 9%
LED work light round 12/24 V, 45 W, 3000 lm
Cable length (mm): 120 | Operating temperature (°C): -40°C / +50°C | Dimensions W x H x D (mm): Ø 114 x 71 | EMC: CISPR 25 class 3 | Light functio... More
Cable length (mm): 120 | Operating temperature (°C): -40°C / +50°C ...
€74,24 €61,36 €68,30 €56,45
You save 8%
Steering cylinder New Holland T4.75-T4.105, T5.85-T5.110, TN60-TN85
€460,61 €380,67 €423,76 €350,22
You save 8%
Stabilus Gas strut 180 N, 323 mm, stroke 100 mm, Case IH, New Holland, Steyr
Stabilus
Menke no.: 202577 | Form: 6 | d1 (mm): 8 | Stroke (mm): 100 | A (mm): 323 | Newtons: 180 | d2 (mm): 18 More
Menke no.: 202577 | Form: 6 | d1 (mm): 8 | Stroke (mm): 100 | A (mm): ...
€97,60 €80,66 €89,79 €74,21
You save 8%
HELLA Alternator 14 V / 120 A, pulley Ø 55 mm, 8 grooves
HELLA
Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 55 | Nominal values (V / A): 14 / 120 | No. of grooves: 8 | Charging current (A): ... More
Additional information: With V-ribbed belt pulley | Pulley Ø (mm): 55...
€630,67 €521,21 €485,92 €401,58
You save 23%
MAHLE Starter motor with reduction 12 V, 3,2 kW, 10 teeth, mounting length 215,8 mm
€468,56 €387,24 €280,64 €231,94
You save 40%
Ball and axial joint 300 mm, taper 20 - 22 mm, M18 x 1,5
A: 300 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22 mm. Taper: 20 - 22 mm. More
A: 300 mm. C: M18 x 1,5 mm. D: M22 x 1,5 mm. E: 20 mm. F: 22 mm. Taper...
€136,81 €113,07 €125,87 €104,02
You save 8%
Outer plate hand brake Case IH, New Holland, Steyr
€126,19 €104,29 €116,09 €95,95
You save 8%
Scharmüller Drawbar K80 manual, rail 390 mm, pin Ø 25 mm, 4000 kg, black
Scharmüller
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 4000 kg. D-value: 120,2 kN. Plate height: 175 mm. Colour: Black. Overhang... More
Rail width: 390 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.683,34 €1.391,19 €1.598,67 €1.321,21
You save 5%
Connector head M16 x 1,5 yellow, brake line, vehicle
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no.: 55929 More
Connection thread: M16 x 1.5 | Version: Yellow, brake line | Menke no....
€23,54 €19,45
LUK Thrust bearing 50 x 90 x 21,6 mm
LUK
Dimensions (mm): 50 x 90 x 21.6 More
Dimensions (mm): 50 x 90 x 21.6
€88,70 €73,31 €81,60 €67,44
You save 8%
MAHLE Alternator 14 V, 120 A, fastening 82 / 10,2 / 86 mm, pulley-Ø 55 mm
MAHLE
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 120 | Direction of rotation: ↻ | Charging current (A): 120 | ... More
Installation angle (°): r 60 | Nominal voltage (V): 14 | Nominal valu...
€540,62 €446,79 €323,80 €267,60
You save 40%
LUK Clutch PTO shaft
€4.348,77 €3.594,02 €4.050,87 €3.347,83
You save 7%
Seal kit Case IH, Steyr, New Holland
€210,32 €173,82 €193,49 €159,91
You save 8%
Velour floor mat black New Holland T5.75 - T5.140
Material: Velour | Colour: Black | - Tufted velour with waterproof non-slip backing - Material: 100% polypropylene - Fibre insert: 500 g/m² | Type: T... More
Material: Velour | Colour: Black | - Tufted velour with waterproof non...
€92,90 €76,78 €85,47 €70,63
You save 8%
Steering cylinder S1 Case IH, New Holland, Steyr
Reference no.: 47136495 More
Reference no.: 47136495
€760,11 €628,19 €699,30 €577,93
You save 8%
Seal kit steering cylinder Case IH, New Holland, Steyr
Reference no.: 48143604 More
Reference no.: 48143604
€102,22 €84,48 €94,04 €77,72
You save 8%
LUK Torsion damper PTO shaft Ø 123 mm, Case IH, New Holland, Steyr
€716,67 €592,29 €659,34 €544,91
You save 8%
LUK Clutch plate 280UKC 22 x 25 mm, 10 splines, sintered
LUK
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintered clutch lining More
Dimensions (mm): 22 x 25 10 grooves | Material specifications: Sintere...
€162,99 €134,70 €149,95 €123,93
You save 8%
Clutch plate 280 sintered, 22 x 25 mm, 10 splines
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sintered clutch lining | Additional information: Made in Germany More
Dimensions (mm): 22 x 25, 10 grooves | Material specifications: Sinter...
€130,06 €107,49 €119,66 €98,89
You save 8%
SACHS Thrust bearing 50 x 80 mm, 89 x 22 mm
SACHS
Dimensions (mm): 50 x 80 89 x 22 More
Dimensions (mm): 50 x 80 89 x 22
€88,38 €73,04 €81,31 €67,20
You save 8%
Thrust bearing driving clutch single 50 x 80/89 x 22 mm
Dimensions (mm): 50 x 80/89 x 22 More
Dimensions (mm): 50 x 80/89 x 22
€50,95 €42,11 €46,87 €38,74
You save 8%
Alternator 14 V, 120 A, flange 83 mm, pulley Ø 55 mm, PV x 8
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 / 120 | Nominal voltage (V): 14 | Flange size (mm): 83,0 | Mounting hole Ø / R (... More
Belt tension hole Ø / R (mm): - / 86,0 | Nominal values (V / A): 14 /...
€171,71 €141,91 €157,97 €130,56
You save 8%
Track rod steering
€95,35 €78,80
LUK Clutch kit Case IH JX 70 - 95, New Holland T4, T5, TD5, TN
LUK
Contents: Pressure plate 458228013610, clutch plate 458328033210 More
Contents: Pressure plate 458228013610, clutch plate 458328033210
€955,18 €789,41 €928,77 €767,58
You save 3%
Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. Taper: 20 - 22,3 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. T...
€35,82 €29,60 €32,95 €27,24
You save 8%
Exhaust gas cooler Case IH, Steyr, New Holland
Description: In common rail engine technology, the exhaust gas coolers have the important task of cooling the exhaust gases to the right temperature s... More
Description: In common rail engine technology, the exhaust gas coolers...
€477,29 €394,45 €439,11 €362,90
You save 8%
EGR valve Case IH Farmall 85A-115A, 85C-115C, 95U-115U
€711,81 €588,27 €654,87 €541,21
You save 8%
Filter outer-Ø 23 mm, bore Ø 8 mm, height 45 mm
Dimensions: Outer Ø: 23, Hole Ø: 8 mm. Height: 45 mm. More
Dimensions: Outer Ø: 23, Hole Ø: 8 mm. Height: 45 mm.
€4,55 €3,76
Replacement glass upper Case IH, New Holland, Steyr
Installation location: Top More
Installation location: Top
€38,13 €31,51 €35,08 €28,99
You save 8%
Seal kit hydraulic steering Case IH, Steyr, New Holland
€100,29 €82,88 €92,27 €76,25
You save 8%
Brake lining hand brake lining on one side Case IH, Steyr, New Holland
Spring left fender Case IH, New Holland, Steyr
€51,26 €42,36 €47,16 €38,97
You save 8%
HIFI Breather filter engine
HIFI
To fit as: Case IH, New Holland, Steyr More
To fit as: Case IH, New Holland, Steyr
€48,60 €40,17 €44,71 €36,95
You save 8%
Seal kit hydraulic steering New Holland
€72,50 €59,92 €66,70 €55,12
You save 8%
Track rod steering
€95,35 €78,80
Hydraulic top link cat. 2/2, 620 - 916 mm, stroke 296 mm, Ø 80 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 916 mm. Piston rod Ø D: 40 mm. Cylinder Ø inner E: 80 mm. Check valve: Top. Lifting force: 9 t. Tensile... More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 916 mm. Piston rod Ø D: ...
€534,47 €441,71 €491,71 €406,37
You save 8%
Hydraulic lifting strut clevis/clevis, 540 mm, stroke 133 mm
Type: Clevis joint/clevis joint. A: 26 mm. S: 37 mm. B: 22 mm. S1: 32,5 mm. L: 540 mm. C: 40 mm. D: 80 mm. Stroke: 133 mm. suitable for: Case IH, New ... More
Type: Clevis joint/clevis joint. A: 26 mm. S: 37 mm. B: 22 mm. S1: 32,...
€500,00 €413,22 €460,00 €380,17
You save 8%
Fender bracket right complete Farmall 85C-115C
€545,71 €451,00 €502,05 €414,92
You save 8%
Spring right fender Case IH, Steyr, New Holland
€52,24 €43,17 €48,06 €39,72
You save 8%
Differential pressure sensor for DPF
€45,67 €37,74 €42,02 €34,72
You save 8%
Showing 1 - 48 of 54

New Holland T5.85 parts for steering, clutch and exhaust after-treatment

The New Holland T5.85 is an all-rounder for everyday work around the yard and in the field. For this model there are more than 50 replacement parts on this page, from GRANIT, LUK, Scharmüller, MAHLE and HIFI. They are the parts you need when the steering develops play, the clutch starts to slip or an emissions warning light comes on.

Taking the play out of the steering

For the steering there are track rods, steering cylinders and seal kits for the hydraulic steering. If a steering cylinder only leaks at the rod, a seal kit is often enough. If the rod itself is scored or pitted, a new cylinder is the better choice. After replacing a track rod, always check the toe-in, or the front tyres will wear unevenly within weeks.

Clutch and alternator

For the clutch there are clutch plates and thrust bearings. If the clutch slips or you hear a whine when you press the pedal, replace the plate and the thrust bearing in one go. Alternators take care of the charging side.

Exhaust after-treatment

The T5.85 uses an EGR valve and a differential pressure sensor for the DPF, and we carry both. A workshop tip: before you replace the differential pressure sensor, inspect the thin hoses running from the sensor to the filter. Heat makes them crack or slip off, and the sensor then reports a fault even though it is fine. A breather filter and another filter are on this page as well.

At the rear and around the tractor

For hitching up there are drawbars, a hydraulic lifting strut and connector heads for the brake line. For the fenders you will find springs and a fender bracket.

  • track rods, steering cylinders and seal kits
  • clutch plates and thrust bearings
  • EGR valve and differential pressure sensor
  • alternators and filters
  • drawbars, a lifting strut and connector heads

The type plate on your T5.85 shows the serial number, and the old part often carries a reference number. Compare both with the product details before ordering.

More from the T5 range

The T5.85 belongs to the New Holland T5 series. If you also run a New Holland T5.95, New Holland T5.100, New Holland T5.105, New Holland T5.110, New Holland T5.115 or New Holland T5.120, go to that model's own page. Everything for the make is under New Holland parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart