Menu
EUR

Steyr 4120 Profi tractor parts & technical data

Browse more than 200 parts that fit the Steyr 4120 Profi, from trailer couplings and electrics to engine components, all gathered on a single page.

175 parts found for Steyr 4120 Profi
Show:
GRAMMER Tractor seat air suspended fabric, 480 mm, 12 V, MSG95G/721
GRAMMER
Comfort seat with air suspension and 12V compressor. Armrests, height adjustable and foldable. Weight adjustment, height adjustment 60 mm and Longitud... More
Comfort seat with air suspension and 12V compressor. Armrests, height ...
€1.079,85 €892,44
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.527,62 €1.262,50 €1.451,20 €1.199,34
You save 5%
MAHLE Gear reduction starter 12 V, 4,2 kW, 10 teeth, 245 mm, clockwise
€460,03 €380,19 €287,50 €237,60
You save 38%
GRANIT Hydraulic top link cat. 3, 640 - 900 mm, cylinder-Ø 90 mm
GRANIT
Top link type: hydraulic. Type: Clevis joint/ball joint. A cat.: 3 / 32. B cat.: 28. F: 640 / 900 mm. Stroke: 260 mm. Piston rod Ø D: 45 mm. Cylinder... More
Top link type: hydraulic. Type: Clevis joint/ball joint. A cat.: 3 / 3...
€692,74 €572,51 €626,75 €517,98
You save 10%
GRANIT Crankshaft seal rear Case IH, Steyr, New Holland
€92,78 €76,68 €88,10 €72,81
You save 5%
GRANIT Tank cap thread 45 mm
GRANIT
Version: Thread: 45 mm. More
Version: Thread: 45 mm.
€21,95 €18,14
Position sensor linkage for lower link shaft
Version: Function: position sensor for lifting arm shaft. More
Version: Function: position sensor for lifting arm shaft.
€462,84 €382,51 €439,65 €363,35
You save 5%
Sauermann Handle set trailer coupling Ø 8 mm Case IH, New Holland, Steyr
€133,70 €110,50 €127,00 €104,96
You save 5%
GRANIT Oil pressure switch steering, 2 blade connections
GRANIT
Version: 2 blade terminals, Also suitable for: four-wheel drive, power shuttle and differential lock. More
Version: 2 blade terminals, Also suitable for: four-wheel drive, power...
€81,80 €67,60 €74,00 €61,16
You save 10%
Scharmüller Trailer coupling rail width 295 mm, coupling pin 31 mm, 2500 kg
Scharmüller
Rail width (mm): 295 | Load capacity (kg): 2500 | Colour: Black | Guide width (mm): 26 | Plate height (mm): 133 | D-value (kN): 82,4 | Detent pin Ø (... More
Rail width (mm): 295 | Load capacity (kg): 2500 | Colour: Black | Guid...
€651,30 €538,26
Dayco Belt tensioner Case IH MXU 100-135, Maxxum 100-145, Puma 115-165
€238,56 €197,16 €226,60 €187,27
You save 5%
Telescopic mirror bracket right
€236,84 €195,74 €214,25 €177,07
You save 10%
GRANIT LED work lights floodlight 28 W, 2692 lm, Ø 84 x 64 mm
GRANIT
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs included: Yes. Light function: -. Dimensions W x H x D: Ø 84 x 64 mm. Mounting... More
Nominal voltage: 12 / 24 V. Voltage range: 10 - 30 V. Bulb: LED. Bulbs...
€65,87 €54,44 €62,55 €51,69
You save 5%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.663,76 €1.375,01 €1.580,55 €1.306,24
You save 5%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
Scharmüller Drawbar 430 mm, 50 x 30 mm, ISO-50, 17 kN, position 1
Scharmüller
Mounting position: 1 | Lock: ISO-50 | Load capacity (kg): 100 | Trailer load (kg): 3500 | Colour: Kubota grey | Height (mm): 30 | Length (mm): 430 | C... More
Mounting position: 1 | Lock: ISO-50 | Load capacity (kg): 100 | Traile...
€224,00 €185,12
GRANIT Solenoid switch valve 132 mm, PWM-valve
GRANIT
Version: 132 mm, PWM valve. More
Version: 132 mm, PWM valve.
€210,15 €173,68
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.073,19 €886,93 €1.019,50 €842,56
You save 5%
Scharmüller Drawbar 242 mm, 50 x 20 mm, ISO-50, 9,3 kN, position 1
Scharmüller
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): 9,3 | Colour: Kubota grey | Version: Standard | Width (mm): 50 | Length (mm): 24... More
Height (mm): 20 | Mounting position: 1 | Lock: ISO-50 | D-value (kN): ...
€259,15 €214,17
Scharmüller Drawbar pin-Ø 31,5 mm, 387 mm, category 2, black
Scharmüller
Width (mm): 60 | Version: Standard | Height (mm): 30 | Length (mm): 387 | Trailer load (kg): 2500 | Colour: Black | Pin Ø (mm): 31,5 | Load capacity ... More
Width (mm): 60 | Version: Standard | Height (mm): 30 | Length (mm): 38...
€324,75 €268,39
Scharmüller Drawbar pin-Ø 31,5 mm, 750 mm, category 2, Kioti gray
Scharmüller
Load capacity (kg): 2200 | Pin Ø (mm): 31,5 | Version: Standard | Colour: Kioti grey | Lock: Pin | Category: Drawbar | Height (mm): 40 | Trailer load... More
Load capacity (kg): 2200 | Pin Ø (mm): 31,5 | Version: Standard | Col...
€377,90 €312,31
Wabco Quick exhaust valve M22 x 1,5, 12 bar, with double non-return valve
Wabco
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit: Including - EVOBUS - MERCEDES-BENZ | Inlet connection: 1: M22 x 1,5 | Version:... More
Operating pressure max. (bar): 12 | Fixing: 2 holes Ø 9.5 mm | To fit...
€74,90 €61,90 €71,15 €58,80
You save 5%
Sauermann Lock, complete 390 mm Case IH, New Holland, Steyr
€488,24 €403,50 €463,80 €383,31
You save 5%
Showing 1 - 24 of 175

Steyr 4120 Profi parts for hitching, the cab and the engine bay

A 4120 Profi rarely spends a working day without something on the back. Tipping trailers, bale carts and slurry tankers all lean on the hitch, which is why a good share of the more than 200 parts on this page sit at the rear of this Steyr. They come from GRANIT, Scharmüller, Sauermann, GRAMMER and Cobo.

Drawbars, Piton Fix and adapter plates

For the hitch rail there are drawbars with a pin or a ball, top drawbars, Piton Fix hooks and a drawbar retrofit kit. An adapter plate lets you mount a flange hitch or another system on the existing rail, which is useful when a farm moves its heavier trailers over to ball couplings.

Whenever you swap hitches, check the locking pin. If it does not drop fully into place, the drawbar can creep out of the rail under load. Once the pin hole has worn oval, replace the whole part rather than just the pin.

Seat, mirrors and cab fittings

Long days on a worn seat end up in your back. You will find tractor seats here, including an air suspended GRAMMER seat with fabric upholstery, plus mirrors for the view behind. Gas struts hold the rear window open, and the front PTO has a push button switch that comes with its connection cable and plug.

A tip on those gas struts: fit them with the piston rod pointing down. That keeps the seal inside the cylinder wetted with oil, so the strut holds its force for longer. If the rear window slowly sags in cold weather, change both struts together so they push evenly.

Belts, cooling and sensors

Under the bonnet you can fit multi-rib belts and complete belt kits, a radiator and O-rings, including one for the thermostat housing. On the transmission there is a PTO speed sensor with connection cable. When the display stops showing PTO speed while the shaft is clearly turning, that sensor and its plug are the first things worth checking.

Getting the right part first time

The type plate shows the 4120 Profi designation together with the chassis number. Keep that number handy in case parts differ within the type, for example by cab version. For belts and seals it is often quicker to read the number off the old part and search on that.

If you run several tractors from the Profi line, each of the others has a page of its own: Steyr 4110 Profi, Steyr 4115 Profi, Steyr 4130 Profi, Steyr 4145 Profi, Steyr 6125 Profi and Steyr 6140 Profi. Order for each machine on the page of its own type. Every other model from the brand is reachable through Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart