Menu
EUR

Steyr 545 tractor parts & technical data

Searching for Steyr 545 parts from the Plus series? This page gathers more than 60 items that fit this type, so there is no guesswork involved.

70 parts found for Steyr 545
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
Hydraulic steering stroke 270 mm
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr, Eicher, Zetor, David Brown, Lindner More
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr,...
€1.762,36 €1.456,50 €1.621,37 €1.339,98
You save 8%
Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm. More
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€58,43 €48,29 €53,76 €44,43
You save 8%
Window rubber clamping range 2,2 mm, b 24 mm, h 22 mm - 5 meter
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm. More
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm.
€46,40 €38,35 €42,69 €35,28
You save 8%
Thrust bearing 57 x 75/100 x 57 mm
Dimensions (mm): 57 x 75/100 x 57 More
Dimensions (mm): 57 x 75/100 x 57
€190,78 €157,67 €175,52 €145,06
You save 8%
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€29,14 €24,08
Clutch plate 280 28 x 35 mm, 10 splines, organic, rigid
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€452,02 €373,57 €415,86 €343,68
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, hub both sides off
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€475,26 €392,78 €437,24 €361,35
You save 8%
Pilot bearing 17 x 40 x 12 mm Steyr 180 - 760 Plus
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€17,44 €14,41
Radiator filler cap Ø 67 mm, height 20 mm
Neck Ø: 67 mm. Height: 20 mm. More
Neck Ø: 67 mm. Height: 20 mm.
€62,64 €51,77 €57,63 €47,63
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, organic, with torsion damping
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€224,75 €185,74 €206,77 €170,88
You save 8%
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
MAHLE
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal voltag... More
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal value...
€303,54 €250,86 €181,80 €150,25
You save 40%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
FEBI Clutch Kit Steyr 540, 548, 650, 658
FEBI
Clutch Kit Steyr 540, 548, 650, 658 More
Clutch Kit Steyr 540, 548, 650, 658
€437,16 €361,29 €334,11 €276,12
You save 24%
Temperature display mechanical water monitoring Ø 60 mm, 12 V, 40-120 °C
Version: Mechanical, for water cooling, 2000 mm cable with sensor M10 x 1.0, dimensions: Ø 60 mm, 12 V, temperature range: 40 - 120°C. More
Version: Mechanical, for water cooling, 2000 mm cable with sensor M10 ...
€84,21 €69,60 €77,47 €64,03
You save 8%
Drive shaft 2000 mm, 2x M18 x 1,5
Version: Thread: 2 x M18 x 1.5. More
Version: Thread: 2 x M18 x 1.5.
€49,37 €40,80 €45,42 €37,54
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, with torsion damping
Additional information: Made in Germany | Dimensions (mm): 28 x 35, 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 28 x 35, 10...
€557,83 €461,02 €513,20 €424,14
You save 8%
Thermostat 38 x 38 x 22 mm, 87° Steyr 30 Plus - 1400 Plus
€73,86 €61,04 €67,95 €56,16
You save 8%
Thermostat 38 x 38 x 22 mm, 71° Steyr 30 Plus - 1400 Plus
€78,41 €64,80 €72,14 €59,62
You save 8%
MAHLE Alternator 14 V / 33 A, pulley-Ø 65 mm Marshall, Steyr, Zetor
MAHLE
Pulley Ø (mm): 65.0 | Belt width (mm) / type: 9,7 | Charging current (A): 33 | Form: B | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Pulley spacing ... More
Pulley Ø (mm): 65.0 | Belt width (mm) / type: 9,7 | Charging current ...
€209,80 €173,39 €131,12 €108,36
You save 38%
Alternator 14 V / 33 A Marshall, Steyr, Zetor
Pulley Ø (mm): 68.0 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 33 | Belt tension hole Ø / R (mm): 8,2 / 80,0 | Mounting L / d / R (mm)... More
Pulley Ø (mm): 68.0 | Nominal voltage (V): 14 | Nominal values (V / A...
€160,00 €132,23 €147,20 €121,65
You save 8%
FEBI Clutch Disc Steyr 540, 548, 650, 658
FEBI
Clutch Disc Steyr 540, 548, 650, 658 More
Clutch Disc Steyr 540, 548, 650, 658
€297,70 €246,03 €75,73 €62,59
You save 75%
Seal feed pump
€2,89 €2,39
Thrust bearing single 60 x 96,5 x 27 mm
Dimensions (mm): 60 x 96.5 x 27 More
Dimensions (mm): 60 x 96.5 x 27
€99,50 €82,23 €91,54 €75,65
You save 8%
Brake lining 60 x 10 x 255 mm Steyr 430-548A
€47,98 €39,65 €44,14 €36,48
You save 8%
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Bosch/Rexroth Hydraulic pump anticlockwise 11 cm³, taper 1:5 Ø 17 x 17 mm
Bosch/Rexroth
Output volume: 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€669,37 €553,20 €615,82 €508,94
You save 8%
Piston ring set 4 rings, Ø 100 mm, 2,5 / 2,5 / 2,5 / 5 mm Steyr
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (square ring) / 2.5 mm / 2.5 mm / 5 mm. More
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (square ring) / 2.5 mm / 2.5 mm...
€57,05 €47,15 €52,49 €43,38
You save 8%
Repair set water pump shaft length 195 mm Steyr 40-768 Plus
Dimensions: Shaft length = 195 mm. More
Dimensions: Shaft length = 195 mm.
€80,86 €66,83
Water pump double pulley Ø 110/154 mm, fastening 4 x M8
To fit: Steyr 540, 545, 548A, 650, 658, 658A, 760, 768, 768A, 670, 8045, 8045A, 942, 948, 40, 50, 60, 70. Description: With gasket. More
To fit: Steyr 540, 545, 548A, 650, 658, 658A, 760, 768, 768A, 670, 804...
€272,31 €225,05 €250,53 €207,05
You save 8%
Radiator hose, bottom Ø 38 mm, length 500 mm Steyr, Case IH
Inner Ø: 38 mm. Length: 500 mm. More
Inner Ø: 38 mm. Length: 500 mm.
€106,59 €88,09 €98,06 €81,04
You save 8%
Inlet valve for turbocharger motors, engine WD 308 - WD 611 Steyr
O-ring cylinder liner 109 x 5 mm Steyr 8045-8130, 942, 948
Dimensions: 109 x 5 mm. More
Dimensions: 109 x 5 mm.
€9,38 €7,75
Injection nozzle Steyr 540-768
Type formula: DLLA150S396, 0433271164. Bosch no.: 2580433271164. More
Type formula: DLLA150S396, 0433271164. Bosch no.: 2580433271164.
€49,15 €40,62 €45,22 €37,37
You save 8%
Linkage Steyr 99001, Series 80-8170
Technical data: can be used in 80 series. More
Technical data: can be used in 80 series.
€182,41 €150,75 €167,82 €138,69
You save 8%
Joint 160 mm, hole up to hole 116 mm, Ø 25, 17,5 mm Steyr 540-8075
Dimensions: Total length = 160, Hole centre to hole centre = 116, Ø = 25, 17.5 mm. More
Dimensions: Total length = 160, Hole centre to hole centre = 116, Ø =...
€39,77 €32,87 €36,59 €30,24
You save 8%
Pin Ø 18 x 91 mm Steyr 540-768, 8045-8075
Dimensions: Ø = 18, Length = 91 mm. More
Dimensions: Ø = 18, Length = 91 mm.
€14,76 €12,20
Piston ring set 3 rings Ø 100 mm, 2,5 mm / 2,5 mm / 4 mm Steyr
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 3 rings, Ø 100 mm, 2.5 mm / 2.5 mm / 4 mm.
€42,51 €35,13 €39,11 €32,32
You save 8%
Silencer vertical 1070 mm, Ø 55 mm, exhaust Ø 43 mm Steyr
Version: Length: 1070 mm, Inner Ø: 55 mm, Outlet Ø: 43 mm. Dimensions: Length: 1070 mm, Inner Ø: 55 mm. Inner Ø: 55 mm. Length: 1070 mm. More
Version: Length: 1070 mm, Inner Ø: 55 mm, Outlet Ø: 43 mm. Dimension...
€160,80 €132,89 €147,94 €122,26
You save 8%
Cylinder head gasket Steyr 545 Plus, 548 Plus, engine WD 308
€94,94 €78,46 €87,34 €72,19
You save 8%
Piston set, complete 4 rings, Ø 100 mm, piston pin Ø 35 x 83 mm
Dimensions: 4 rings, Ø 100 mm, Gudgeon pin Ø 35 x 83 mm, Combustion chamber Ø 53.8 mm, Combustion chamber depth 19.5 mm. Description: Supplied with... More
Dimensions: 4 rings, Ø 100 mm, Gudgeon pin Ø 35 x 83 mm, Combustion ...
€207,58 €171,55 €190,97 €157,83
You save 8%
Lever steering valve SB7, 3-hole Fendt, Case IH, Steyr, Schlüter
Showing 1 - 48 of 70

Steyr 545 parts

A Steyr 545 that smokes, uses oil or is hard to start is often heading for an engine rebuild. This page lists more than 60 parts that fit the 545, and a good share of them are for that engine. Alongside GRANIT you will find makers such as MAHLE, MANN-FILTER, Bosch/Rexroth and GRAMMER.

Engine rebuild parts

For a rebuild there are MAHLE piston ring sets, inlet valves, valve cover gaskets and seal kits. Before fitting new piston rings, push each ring squarely into its bore and measure the end gap with a feeler gauge. Fit the rings with the marking facing up and stagger the gaps so they never line up. A new inlet valve should be lapped into its seat before the cylinder head goes back on.

On a rebuild, renew the valve cover gasket and every seal you disturb along the way. An old gasket that has already been compressed rarely seals properly a second time, and oil leaking from the top of the engine runs down the block and makes it hard to trace any other leak. Change the fuel filter at the same time so the rebuilt engine starts on clean fuel.

Other parts for the 545

  • Fuel filters from MANN-FILTER, vertical silencers and exhaust gaskets.
  • Radiator hoses, including the bottom hose to the radiator.
  • Clutch plates and thrust bearings.
  • Bosch/Rexroth hydraulic pumps and bolt sets for the steering valve.
  • Alternators, window rubbers and pins for pivot points.

A tip for the cooling system: squeeze each hose with the engine cold. If it feels hard, or soft and spongy, or you can see fine cracks near the clamps, replace it even if it is not leaking yet. A hose that bursts halfway through mowing costs far more than the hose itself, and it is worth fitting new clamps rather than reusing the old ones.

Type plate, reference numbers and the Plus range

Check the type plate and keep the old part alongside. A reference number on a filter, piston ring or hydraulic pump is more reliable than comparing photos. With piston ring sets, look at the diameter and width of each ring. With a hydraulic pump, check direction of rotation and the connections.

The 545 is part of the Steyr Plus range. The Steyr 540, Steyr 650, Steyr 760 and Steyr 870 each have a page of their own with the parts that fit that particular model, handy when more than one Steyr works on the farm. Every other Steyr tractor can be found under Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart