Menu
EUR

Steyr 540 tractor parts & technical data

A dedicated page for the Steyr 540 from the Plus series. It lists more than 70 parts filtered by model, so you can see quickly what fits your tractor.

78 parts found for Steyr 540
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
Hydraulic steering stroke 270 mm
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr, Eicher, Zetor, David Brown, Lindner More
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr,...
€1.762,36 €1.456,50 €1.621,37 €1.339,98
You save 8%
Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm. More
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€58,43 €48,29 €53,76 €44,43
You save 8%
Window rubber clamping range 2,2 mm, b 24 mm, h 22 mm - 5 meter
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm. More
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm.
€46,40 €38,35 €42,69 €35,28
You save 8%
Thrust bearing 57 x 75/100 x 57 mm
Dimensions (mm): 57 x 75/100 x 57 More
Dimensions (mm): 57 x 75/100 x 57
€190,78 €157,67 €175,52 €145,06
You save 8%
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€29,14 €24,08
Clutch plate 280 28 x 35 mm, 10 splines, organic, rigid
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€452,02 €373,57 €415,86 €343,68
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, hub both sides off
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€475,26 €392,78 €437,24 €361,35
You save 8%
Pilot bearing 17 x 40 x 12 mm Steyr 180 - 760 Plus
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€17,44 €14,41
Radiator filler cap Ø 67 mm, height 20 mm
Neck Ø: 67 mm. Height: 20 mm. More
Neck Ø: 67 mm. Height: 20 mm.
€62,64 €51,77 €57,63 €47,63
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, organic, with torsion damping
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€224,75 €185,74 €206,77 €170,88
You save 8%
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
MAHLE
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal voltag... More
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal value...
€303,54 €250,86 €181,80 €150,25
You save 40%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
FEBI Clutch Kit Steyr 540, 548, 650, 658
FEBI
Clutch Kit Steyr 540, 548, 650, 658 More
Clutch Kit Steyr 540, 548, 650, 658
€437,16 €361,29 €334,11 €276,12
You save 24%
Temperature display mechanical water monitoring Ø 60 mm, 12 V, 40-120 °C
Version: Mechanical, for water cooling, 2000 mm cable with sensor M10 x 1.0, dimensions: Ø 60 mm, 12 V, temperature range: 40 - 120°C. More
Version: Mechanical, for water cooling, 2000 mm cable with sensor M10 ...
€84,21 €69,60 €77,47 €64,03
You save 8%
Drive shaft 2000 mm, 2x M18 x 1,5
Version: Thread: 2 x M18 x 1.5. More
Version: Thread: 2 x M18 x 1.5.
€49,37 €40,80 €45,42 €37,54
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, with torsion damping
Additional information: Made in Germany | Dimensions (mm): 28 x 35, 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 28 x 35, 10...
€557,83 €461,02 €513,20 €424,14
You save 8%
Bosch/Rexroth Hydraulic pump 8 cm³, taper 1:5, Ø 17 x 17 mm, clockwise
Bosch/Rexroth
Direction of rotation: Right | Output volume (cc/rev): 8 | Drive shaft: Taper 1:5, Ø 17 x 17 | Bosch no.: 0510425024 More
Direction of rotation: Right | Output volume (cc/rev): 8 | Drive shaft...
€591,52 €488,86 €544,20 €449,75
You save 8%
Thermostat 38 x 38 x 22 mm, 87° Steyr 30 Plus - 1400 Plus
€73,86 €61,04 €67,95 €56,16
You save 8%
Thermostat 38 x 38 x 22 mm, 71° Steyr 30 Plus - 1400 Plus
€78,41 €64,80 €72,14 €59,62
You save 8%
MAHLE Alternator 14 V / 33 A, pulley-Ø 65 mm Marshall, Steyr, Zetor
MAHLE
Pulley Ø (mm): 65.0 | Belt width (mm) / type: 9,7 | Charging current (A): 33 | Form: B | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Pulley spacing ... More
Pulley Ø (mm): 65.0 | Belt width (mm) / type: 9,7 | Charging current ...
€209,80 €173,39 €131,12 €108,36
You save 38%
Alternator 14 V / 33 A Marshall, Steyr, Zetor
Pulley Ø (mm): 68.0 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 33 | Belt tension hole Ø / R (mm): 8,2 / 80,0 | Mounting L / d / R (mm)... More
Pulley Ø (mm): 68.0 | Nominal voltage (V): 14 | Nominal values (V / A...
€160,00 €132,23 €147,20 €121,65
You save 8%
FEBI Clutch Disc Steyr 540, 548, 650, 658
FEBI
Clutch Disc Steyr 540, 548, 650, 658 More
Clutch Disc Steyr 540, 548, 650, 658
€297,70 €246,03 €75,73 €62,59
You save 75%
Ball joint 95 mm, M14 x 1,5, M20 x 1,5 L, taper 16,2 - 18,2 mm
A: 95 mm. C: M14 x 1,5 mm. D: M20 x 1,5 L mm. E: 16,2 mm. F: 18,2 mm. Taper: 16,2 - 18,2 mm. More
A: 95 mm. C: M14 x 1,5 mm. D: M20 x 1,5 L mm. E: 16,2 mm. F: 18,2 mm. ...
€42,53 €35,15 €39,13 €32,34
You save 8%
Seal feed pump
€2,89 €2,39
Clutch plate single clutch Steyr 430 Plus - 760 Plus
Additional information: Made in Germany More
Additional information: Made in Germany
€1.564,40 €1.292,89 €1.439,25 €1.189,46
You save 8%
Thrust bearing single 60 x 96,5 x 27 mm
Dimensions (mm): 60 x 96.5 x 27 More
Dimensions (mm): 60 x 96.5 x 27
€99,50 €82,23 €91,54 €75,65
You save 8%
Brake lining 60 x 10 x 255 mm Steyr 430-548A
€47,98 €39,65 €44,14 €36,48
You save 8%
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Bosch/Rexroth Hydraulic pump anticlockwise 11 cm³, taper 1:5 Ø 17 x 17 mm
Bosch/Rexroth
Output volume: 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 11 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€669,37 €553,20 €615,82 €508,94
You save 8%
Piston ring set 4 rings, Ø 100 mm, 2,5 / 2,5 / 2,5 / 5 mm Steyr
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (square ring) / 2.5 mm / 2.5 mm / 5 mm. More
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (square ring) / 2.5 mm / 2.5 mm...
€57,05 €47,15 €52,49 €43,38
You save 8%
Set of parts feed pump Ø 29/35 mm, height 53 mm engine For 314
Dimensions: Ø 29/35 mm. Height: 53 mm. More
Dimensions: Ø 29/35 mm. Height: 53 mm.
€10,83 €8,95 €5,35 €4,42
You save 51%
Radiator 550 x 460 mm Steyr 30, 40, 430, 540, 548 Plus
To fit as: Steyr Series Plus: 30 Plus, 40 Plus, 430 Plus, 540 Plus, 548 Plus More
To fit as: Steyr Series Plus: 30 Plus, 40 Plus, 430 Plus, 540 Plus, 54...
€570,85 €471,78 €525,18 €434,03
You save 8%
Repair set water pump shaft length 195 mm Steyr 40-768 Plus
Dimensions: Shaft length = 195 mm. More
Dimensions: Shaft length = 195 mm.
€80,86 €66,83
Water pump double pulley Ø 110/154 mm, fastening 4 x M8
To fit: Steyr 540, 545, 548A, 650, 658, 658A, 760, 768, 768A, 670, 8045, 8045A, 942, 948, 40, 50, 60, 70. Description: With gasket. More
To fit: Steyr 540, 545, 548A, 650, 658, 658A, 760, 768, 768A, 670, 804...
€272,31 €225,05 €250,53 €207,05
You save 8%
Radiator hose, bottom Ø 38 mm, length 500 mm Steyr, Case IH
Inner Ø: 38 mm. Length: 500 mm. More
Inner Ø: 38 mm. Length: 500 mm.
€106,59 €88,09 €98,06 €81,04
You save 8%
Inlet valve for turbocharger motors, engine WD 308 - WD 611 Steyr
O-ring cylinder liner 109 x 5 mm Steyr 8045-8130, 942, 948
Dimensions: 109 x 5 mm. More
Dimensions: 109 x 5 mm.
€9,38 €7,75
Cylinder head gasket set upper engine WD 307 Steyr 540 Plus
€164,69 €136,11 €151,51 €125,22
You save 8%
Injection nozzle Steyr 540-768
Type formula: DLLA150S396, 0433271164. Bosch no.: 2580433271164. More
Type formula: DLLA150S396, 0433271164. Bosch no.: 2580433271164.
€49,15 €40,62 €45,22 €37,37
You save 8%
Linkage Steyr 99001, Series 80-8170
Technical data: can be used in 80 series. More
Technical data: can be used in 80 series.
€182,41 €150,75 €167,82 €138,69
You save 8%
Showing 1 - 48 of 78

Steyr 540 parts

Owners of a Steyr 540 tend to do their own spanner work, and this page is set up for that. It lists more than 70 Steyr 540 parts from GRANIT, Bosch/Rexroth, FEBI, MAHLE and MANN-FILTER, covering the engine, clutch, hydraulics, exhaust and cab.

Fuel, cooling and engine overhaul

Fuel filters are part of routine servicing. After changing one, bleed the fuel system with the hand primer until only clear diesel without bubbles comes out of the bleed screw. Skip that step and the engine will stall as soon as the trapped air reaches the injectors.

For the cooling system there are radiator hoses and thermostats. If a hose has gone hard or shows fine cracks at the clamp, replace it before it splits on a hot day, and use a new clamp, since old clamps often lose their tension. For an engine rebuild you will find piston ring sets and a valve cover gasket.

Clutch and hydraulics

Clutch plates for the Steyr 540 are listed here along with a hydraulic pump, single-acting hydraulic parts and seal kits, plus a bolt set for the second control valve. When replacing the clutch, count the splines in the hub of the old plate and compare the outside diameter, so the new plate is right first time. Prime a new hydraulic pump with clean oil before fitting it, so it never runs dry on start-up.

Exhaust, electrics and cab

The exhaust is covered by a vertical silencer and the matching exhaust gasket, which you should always renew whenever the silencer comes off. If the manifold nuts are seized, soak them in penetrating oil the day before and nip them up slightly before undoing them. That way you are far less likely to snap a stud in the head. An alternator, pins and window rubbers for the cab also fit the 540.

Getting the right part

The serial plate confirms that you have a 540 rather than a 545 or 548. Then use the reference number on the old part. On a clutch plate it is often on the hub, on a filter on the outside of the canister, and on a hydraulic pump on the plate fixed to the pump body.

Several other Steyr tractors from this range have their own pages with matching parts.

Every other model from the brand can be found under Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart