Menu
EUR

Steyr 760 tractor parts & technical data

For the Steyr 760 of the Plus series this page gathers more than 80 matching parts, electrics among them, so you no longer have to guess.

88 parts found for Steyr 760
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€295,17 €243,94 €280,40 €231,74
You save 5%
GRANIT Hydraulic steering stroke 270 mm
GRANIT
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr, Eicher, Zetor, David Brown, Lindner More
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr,...
€1.773,33 €1.465,56 €1.604,40 €1.325,95
You save 10%
GRANIT Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
GRANIT
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm. More
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€56,00 €46,28 €53,20 €43,97
You save 5%
Window rubber clamping range 2,2 mm, b 24 mm, h 22 mm - 5 meter
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm. More
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm.
€44,47 €36,75 €42,20 €34,88
You save 5%
Bosch/Rexroth Hydraulic pump 16 cm³, taper 1:5, Ø 17 x 17 mm, anticlockwise
Bosch/Rexroth
Drive shaft: Taper 1:5, Ø 17 x 17 | Bosch no.: 0510625337 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 16 More
Drive shaft: Taper 1:5, Ø 17 x 17 | Bosch no.: 0510625337 | Direction...
€514,21 €424,97 €488,45 €403,68
You save 5%
Thermostat 38 x 38 x 22 mm, 87° Steyr 30 Plus - 1400 Plus
€70,78 €58,50 €67,20 €55,54
You save 5%
Bolt set 4de steering valve 3x M8 x 280
Technical data: 3x M8 x 280. More
Technical data: 3x M8 x 280.
€65,04 €53,75 €61,75 €51,03
You save 5%
GRANIT Thermostat 38 x 38 x 22 mm, 71° Steyr 30 Plus - 1400 Plus
€75,14 €62,10 €71,35 €58,97
You save 5%
Bosch/Rexroth Hydraulic pump anticlockwise 19 cm³/rpm., claw Ø 17,8 x 8 Case IH, Steyr
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Claw, Ø 17.8 x 8. Operating pressure max.: 210 bar. Direction of rotation: Anticlockwise. Min. speed: 500 1/mi... More
Output volume: 19 cc/rev. Drive shaft: Claw, Ø 17.8 x 8. Operating pr...
€592,77 €489,89 €563,10 €465,37
You save 5%
GRANIT Piston ring set 4 rings, Ø 100 mm, 2,5 / 2,5 / 2,5 / 5 mm Steyr
GRANIT
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (square ring) / 2.5 mm / 2.5 mm / 5 mm. More
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (square ring) / 2.5 mm / 2.5 mm...
€54,67 €45,18 €51,90 €42,89
You save 5%
GRANIT O-ring cylinder liner 109 x 5 mm Steyr 8045-8130, 942, 948
GRANIT
Dimensions: 109 x 5 mm. More
Dimensions: 109 x 5 mm.
€8,95 €7,40
Pilot bearing 17 x 40 x 12 mm Steyr 180 - 760 Plus
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€16,70 €13,80
GRANIT Piston ring set 4 clamp, Ø 100 mm, 2,5 / 2,5 / 2,5 / 4 mm Steyr
GRANIT
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring) / 2.5 mm / 2.5 mm / 4 mm. More
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (trapezoidal ring) / 2.5 mm / 2...
€65,90 €54,46 €62,60 €51,74
You save 5%
GRANIT Lever steering valve SB7, 3-hole Fendt, Case IH, Steyr, Schlüter
€66,99 €55,36 €63,60 €52,56
You save 5%
Clutch plate 280 28 x 35 mm, 10 splines, with torsion damping
Additional information: Made in Germany | Dimensions (mm): 28 x 35, 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 28 x 35, 10...
€561,31 €463,89 €507,85 €419,71
You save 10%
Thrust bearing single 60 x 96,5 x 27 mm
Dimensions (mm): 60 x 96.5 x 27 More
Dimensions (mm): 60 x 96.5 x 27
€95,35 €78,80 €90,55 €74,83
You save 5%
MAHLE Alternator 14 V / 33 A, pulley-Ø 65 mm Marshall, Steyr, Zetor
MAHLE
Pulley Ø (mm): 65.0 | Belt width (mm) / type: 9,7 | Charging current (A): 33 | Form: B | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Pulley spacing ... More
Pulley Ø (mm): 65.0 | Belt width (mm) / type: 9,7 | Charging current ...
€209,80 €173,39 €131,10 €108,35
You save 38%
GRANIT Ball joint 95 mm, M14 x 1,5, M22 x 1,5 L, taper 16,2 - 18,3 mm
GRANIT
A: 95 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 95 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. ...
€37,91 €31,33 €36,00 €29,75
You save 5%
GRANIT Bolt set 2de steering valve 3x M8 x 130
GRANIT
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€14,95 €12,36
Showing 1 - 24 of 88

Steyr 760 parts for engine overhaul, hydraulics and clutch

The Steyr 760 from the Plus range is the kind of tractor people keep for decades, provided the wear parts are replaced in time. This page brings together more than 80 parts that fit the 760, from GRANIT, Bosch/Rexroth, MAHLE, LUK and GRAMMER.

Clutch and engine

When the drive clutch slips, you will find clutch plates and a thrust bearing here. A good habit when the tractor is split anyway: replace the thrust bearing together with the plate. A bearing that still turns quietly but has some play rarely lasts long, and splitting the tractor twice costs far more than the bearing. Check the flywheel face as well, since scoring or blue heat marks mean it needs machining before the new plate goes in.

For an engine that burns oil or smokes blue, MAHLE piston ring sets are available for a rebuild. The cooling system is covered with a thermostat and radiator hoses, and the exhaust with a vertical silencer and gasket.

Hydraulics, electrics and cab

Hydraulic pumps, including single pumps from Bosch/Rexroth, keep the linkage and steering working. Always match the direction of rotation and the shaft taper, because a left hand pump will not deliver oil where a right hand one belongs. A bolt set for the control valve is also listed. For the electrics there is a starter motor and an alternator, and new window rubber keeps the cab dry. Ball joints and pins take the slack out of the steering and the linkage.

Finding the right part for your 760

Check the serial plate first to confirm you are working on a Steyr 760. The old part is the next best source: pumps, starters and alternators usually carry a reference number you can compare with the new part. On a clutch plate, count the splines and measure the hub bore.

If you fit new piston rings yourself, stagger the ring gaps around the piston so they do not line up, and install each ring with its marking facing up. Check the end gap of every ring in its bore first. During the first hours, vary the load rather than letting the engine idle for long, so the rings bed in properly.

Related Steyr models

Other tractors from the same range have their own pages with the parts that fit them:

The full selection for the brand is under Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart