Menu
EUR

Steyr 650 tractor parts & technical data

For the Steyr 650 from the Plus Series you will find more than 80 parts that fit this tractor, electrics among them, all together on one page.

89 parts found for Steyr 650
Show:
GRAMMER Tractor seat mechanical suspension PVC 480 mm, track width 187 mm
GRAMMER
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Optional. Track gauge: 187 mm. Seat width: 480 mm. Joystick console: No. Restraint ... More
Suspension: Mechanical. Upholstery type: PVC. Seat contact switch: Opt...
€333,37 €275,51
Hydraulic steering stroke 270 mm
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr, Eicher, Zetor, David Brown, Lindner More
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr,...
€1.762,36 €1.456,50 €1.621,37 €1.339,98
You save 8%
Window rubber clamping range 1 - 4 mm, b 19,4 mm, h 14,5 mm - 5 meter
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm. More
Clamping range: 1 - 4 mm. Length: 5 m. B: 19,4 mm. H: 14,5 mm.
€58,43 €48,29 €53,76 €44,43
You save 8%
Window rubber clamping range 2,2 mm, b 24 mm, h 22 mm - 5 meter
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm. More
Clamping range: 2,2 mm. Length: 5 m. B: 24 mm. H: 22 mm.
€46,40 €38,35 €42,69 €35,28
You save 8%
Thrust bearing 57 x 75/100 x 57 mm
Dimensions (mm): 57 x 75/100 x 57 More
Dimensions (mm): 57 x 75/100 x 57
€190,78 €157,67 €175,52 €145,06
You save 8%
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
€29,14 €24,08
Clutch plate 280 28 x 35 mm, 10 splines, organic, rigid
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€452,02 €373,57 €415,86 €343,68
You save 8%
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17 mm, anticlockwise
Bosch/Rexroth
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€582,04 €481,02 €535,48 €442,54
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, hub both sides off
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€475,26 €392,78 €437,24 €361,35
You save 8%
Double clutch Do 250/250K 23 x 29 mm, 46 x 50 mm John Deere, Steyr
Additional information: Made in Germany | Dimensions (mm): 23 x 29, 10 grooves, 46 x 50, 8 grooves More
Additional information: Made in Germany | Dimensions (mm): 23 x 29, 10...
€2.433,10 €2.010,83 €2.288,45 €1.891,28
You save 6%
Pilot bearing 17 x 40 x 12 mm Steyr 180 - 760 Plus
Dimensions (mm): 17 x 40 x 12 More
Dimensions (mm): 17 x 40 x 12
€17,44 €14,41
Bosch/Rexroth Hydraulic pump 16 cm³, taper 1:5, Ø 17 x 17 mm, anticlockwise
Bosch/Rexroth
Drive shaft: Taper 1:5, Ø 17 x 17 | Bosch no.: 0510625337 | Direction of rotation: Anticlockwise | Output volume (cc/rev): 16 More
Drive shaft: Taper 1:5, Ø 17 x 17 | Bosch no.: 0510625337 | Direction...
€536,58 €443,45 €493,65 €407,98
You save 8%
Radiator filler cap Ø 67 mm, height 20 mm
Neck Ø: 67 mm. Height: 20 mm. More
Neck Ø: 67 mm. Height: 20 mm.
€62,64 €51,77 €57,63 €47,63
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, organic, with torsion damping
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organic clutch lining | Additional information: Made in Germany More
Dimensions (mm): 28 x 35, 10 grooves | Material specifications: Organi...
€224,75 €185,74 €206,77 €170,88
You save 8%
MAHLE Alternator 14 V, 65 A, flange 56 mm, with fan
MAHLE
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal values (V / A): 14 / 65 | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Nominal voltag... More
Belt width (mm) / type: - | Direction of rotation: ↻ | Nominal value...
€303,54 €250,86 €181,80 €150,25
You save 40%
FEBI Fuel filter WK842
€19,60 €16,20 €8,47 €7,00
You save 57%
FEBI Clutch Kit Steyr 540, 548, 650, 658
FEBI
Clutch Kit Steyr 540, 548, 650, 658 More
Clutch Kit Steyr 540, 548, 650, 658
€437,16 €361,29 €334,11 €276,12
You save 24%
Bosch/Rexroth Hydraulic pump anticlockwise 19 cm³/rpm., claw Ø 17,8 x 8 Case IH, Steyr
Bosch/Rexroth
Output volume: 19 cc/rev. Drive shaft: Claw, Ø 17.8 x 8. Operating pressure max.: 210 bar. Direction of rotation: Anticlockwise. Min. speed: 500 1/mi... More
Output volume: 19 cc/rev. Drive shaft: Claw, Ø 17.8 x 8. Operating pr...
€618,55 €511,20 €569,07 €470,30
You save 8%
Temperature display mechanical water monitoring Ø 60 mm, 12 V, 40-120 °C
Version: Mechanical, for water cooling, 2000 mm cable with sensor M10 x 1.0, dimensions: Ø 60 mm, 12 V, temperature range: 40 - 120°C. More
Version: Mechanical, for water cooling, 2000 mm cable with sensor M10 ...
€84,21 €69,60 €77,47 €64,03
You save 8%
Drive shaft 2000 mm, 2x M18 x 1,5
Version: Thread: 2 x M18 x 1.5. More
Version: Thread: 2 x M18 x 1.5.
€49,37 €40,80 €45,42 €37,54
You save 8%
Clutch plate 280 28 x 35 mm, 10 splines, with torsion damping
Additional information: Made in Germany | Dimensions (mm): 28 x 35, 10 grooves More
Additional information: Made in Germany | Dimensions (mm): 28 x 35, 10...
€557,83 €461,02 €513,20 €424,14
You save 8%
Thermostat 38 x 38 x 22 mm, 87° Steyr 30 Plus - 1400 Plus
€73,86 €61,04 €67,95 €56,16
You save 8%
Thermostat 38 x 38 x 22 mm, 71° Steyr 30 Plus - 1400 Plus
€78,41 €64,80 €72,14 €59,62
You save 8%
MAHLE Alternator 14 V / 33 A, pulley-Ø 65 mm Marshall, Steyr, Zetor
MAHLE
Pulley Ø (mm): 65.0 | Belt width (mm) / type: 9,7 | Charging current (A): 33 | Form: B | Mounting L / d / R (mm): 56,0 / 8,2 / 86,0 | Pulley spacing ... More
Pulley Ø (mm): 65.0 | Belt width (mm) / type: 9,7 | Charging current ...
€209,80 €173,39 €131,12 €108,36
You save 38%
Alternator 14 V / 33 A Marshall, Steyr, Zetor
Pulley Ø (mm): 68.0 | Nominal voltage (V): 14 | Nominal values (V / A): 14 / 33 | Belt tension hole Ø / R (mm): 8,2 / 80,0 | Mounting L / d / R (mm)... More
Pulley Ø (mm): 68.0 | Nominal voltage (V): 14 | Nominal values (V / A...
€160,00 €132,23 €147,20 €121,65
You save 8%
FEBI Clutch Disc Steyr 540, 548, 650, 658
FEBI
Clutch Disc Steyr 540, 548, 650, 658 More
Clutch Disc Steyr 540, 548, 650, 658
€297,70 €246,03 €75,73 €62,59
You save 75%
MAHLE Starter motor 12 V, 3,0 kW, 11 teeth clockwise, Ø 82,5 mm
€568,96 €470,21 €340,77 €281,63
You save 40%
Starter motor 12V 3,0 kW, 11 teeth clockwise, 272,5 mm
€308,69 €255,12 €283,99 €234,71
You save 8%
Ball joint 95 mm, M14 x 1,5, M20 x 1,5 L, taper 16,2 - 18,2 mm
A: 95 mm. C: M14 x 1,5 mm. D: M20 x 1,5 L mm. E: 16,2 mm. F: 18,2 mm. Taper: 16,2 - 18,2 mm. More
A: 95 mm. C: M14 x 1,5 mm. D: M20 x 1,5 L mm. E: 16,2 mm. F: 18,2 mm. ...
€42,53 €35,15 €39,13 €32,34
You save 8%
Brake shoe Foot brake 60 x 300 mm Steyr 288, 290, 650-768
€251,64 €207,97 €231,51 €191,33
You save 8%
Cylinder head gasket Steyr 650, 658, 760, 768
€95,44 €78,88 €87,80 €72,57
You save 8%
Seal feed pump
€2,89 €2,39
Clutch plate single clutch Steyr 430 Plus - 760 Plus
Additional information: Made in Germany More
Additional information: Made in Germany
€1.564,40 €1.292,89 €1.439,25 €1.189,46
You save 8%
Thrust bearing single 60 x 96,5 x 27 mm
Dimensions (mm): 60 x 96.5 x 27 More
Dimensions (mm): 60 x 96.5 x 27
€99,50 €82,23 €91,54 €75,65
You save 8%
MAHLE Starter motor with reduction 12 V, 3,2 kW, 11 teeth, mounting Ø 82,5 mm
€393,07 €324,85 €235,42 €194,56
You save 40%
Ball joint 95 mm, M14 x 1,5, M22 x 1,5, taper 16,2 - 18,3 mm
A: 95 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 95 mm. C: M14 x 1,5 mm. D: M22 x 1,5 mm. E: 16,2 mm. F: 18,3 mm. Ta...
€39,56 €32,69 €36,40 €30,08
You save 8%
Cylinder head gasket set upper engine WD 407 Steyr 650 Plus
€322,57 €266,59 €296,76 €245,26
You save 8%
Bolt set 2de steering valve 3x M8 x 130
Technical data: 3x M8 x 130. Description: For 1st Control unit. More
Technical data: 3x M8 x 130. Description: For 1st Control unit.
€15,63 €12,91
Feed pump 3 hole, hole spacing 53 x 34 mm, flange 24 mm
Version: 3 holes, Vertical hole spacing = 53 mm, Horizontal hole spacing = 34 mm, Flange to end of roller = 24 mm. More
Version: 3 holes, Vertical hole spacing = 53 mm, Horizontal hole spaci...
€116,79 €96,52 €107,45 €88,80
You save 8%
Piston ring set 4 rings, Ø 100 mm, 2,5 / 2,5 / 2,5 / 5 mm Steyr
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (square ring) / 2.5 mm / 2.5 mm / 5 mm. More
Dimensions: 4 rings, Ø 100 mm, 2.5 mm (square ring) / 2.5 mm / 2.5 mm...
€57,05 €47,15 €52,49 €43,38
You save 8%
Cylinder head gasket set upper engine WD 407, WD 408 Steyr 650-768 Plus
Set of parts feed pump Ø 29/35 mm, height 53 mm engine For 314
Dimensions: Ø 29/35 mm. Height: 53 mm. More
Dimensions: Ø 29/35 mm. Height: 53 mm.
€10,83 €8,95 €5,35 €4,42
You save 51%
Bosch/Rexroth Hydraulic pump 16 cm³/rpm., taper 1:5, Ø 17 x 17, left
Bosch/Rexroth
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operating pressure max.: 250 bar. Direction of rotation: Anticlockwise. Min. speed: 500 ... More
Output volume: 16 cc/rev. Drive shaft: Taper 1:5, Ø 17 x 17. Operatin...
€704,78 €582,46 €648,40 €535,87
You save 8%
Ball joint 95 mm, M14 x 1,5, M22 x 1,5 L, taper 16,2 - 18,3 mm
A: 95 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. Taper: 16,2 - 18,3 mm. More
A: 95 mm. C: M14 x 1,5 mm. D: M22 x 1,5 L mm. E: 16,2 mm. F: 18,3 mm. ...
€39,56 €32,69 €36,40 €30,08
You save 8%
Showing 1 - 48 of 89

Steyr 650 parts

Keeping an older Steyr working

Plenty of Steyr 650 tractors still do a regular week of work, and keeping one in good order comes down to sound replacement parts for the engine, cooling, clutch and hydraulics. This page carries more than 80 new Steyr 650 parts from GRANIT, MAHLE, FEBI, MANN-FILTER and Bosch/Rexroth.

Cooling system

There are radiator hoses and thermostats. To test a thermostat, hang it in a pan of water, heat it slowly and watch with a thermometer when it opens. A thermostat stuck open keeps the engine too cold, and one stuck shut makes it boil. Replace any hose that feels hard, cracked, or soft and swollen while you are at it.

Engine rebuild parts

For the engine there are piston ring sets, exhaust gaskets and MANN-FILTER fuel filters. After changing the fuel filter, bleed the fuel system, or the engine will start badly or stall after a few minutes. Before fitting new piston rings, check the end gap of each ring in its bore, then stagger the gaps around the piston. If they line up, the engine will blow by and burn oil.

Hydraulics, steering and clutch

The hydraulics are covered with single pumps and hydraulic pumps. Always check the direction of rotation, left or right, and compare the taper and flange with the old pump, since a pump turning the wrong way will not deliver and can be damaged quickly. For the steering there are ball joints and a bolt set for the steering valve, and for the clutch there are clutch plates. Starter motors and alternators cover the electrics. If the charge light glows faintly with the engine running, check the belt tension and the cables before replacing the alternator.

Around the tractor you will find silencers, pins and window rubbers for the cab. A new window rubber goes in far more easily if you warm it first in the sun or in warm water.

Matching the part to your 650

The 650 belongs to the Steyr Plus range. Check the type plate to confirm it really is a 650, and look for a reference number on the old part. For a clutch plate, count the splines and measure the diameter, and for a starter count the teeth on the pinion.

If you also run a Steyr 540, Steyr 545, Steyr 760 or Steyr 870, each has its own page with the parts that fit it. The other models from the brand are listed under Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart