Menu
EUR
Techniek Totaal Logo

We are closed today

Dear visitor!

Welcome to our site. Today is Sunday, a day of rest in the Christian religion. Therefore, we have chosen not to work today, and our webshop is closed. Of course, you are warmly welcome again tomorrow.

Have a nice Sunday and best regards,
Team Techniek Totaal

8075

139 parts found for Steyr 8075
Show:
Hydraulic steering stroke 270 mm
Hydraulic steering stroke 270 mm
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr, Eicher, Zetor, David Brown, Lindner More
To fit as: Massey Ferguson, International, John Deere, Renault, Steyr,...
Add to wishlist
€1.762,36 €1.456,50 €1.621,37 €1.339,98
You save 8%
Steering valve ew/dw with float position 250 bar, 60 l/min, system SB7
Steering valve ew/dw with float position 250 bar, 60 l/min, system SB7
This auxiliary control unit is a four-position device that can be used for double- and single-acting lifting cylinders. It has gate-sealed cylinder co... More
This auxiliary control unit is a four-position device that can be used...
Add to wishlist
€595,61 €492,24 €547,96 €452,86
You save 8%
Scharmüller Drawbar K80 rail 330 mm, pin Ø 25 mm, 3000 kg, black
Scharmüller
Drawbar K80 rail 330 mm, pin Ø 25 mm, 3000 kg, black
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 150 mm. Colour: Black. Overhang:... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
Add to wishlist
€1.115,58 €921,97 €1.026,33 €848,21
You save 8%
Scharmüller Drawbar K50 Scharmüller S32, rail 330 mm, pin Ø 25 mm, 31 kN
Scharmüller
Drawbar K50 Scharmüller S32, rail 330 mm, pin Ø 25 mm, 31 kN
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 167 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
Add to wishlist
€1.043,39 €862,31 €959,92 €793,32
You save 8%
FEBI Air filter C13114/4
FEBI
Air filter C13114/4
Add to wishlist
€37,09 €30,65 €16,38 €13,54
You save 56%
MANN-FILTER Engine oil filter W940, LF3402, Ø 93 mm, height 142 mm, 3/4-16 UNF
MANN-FILTER
Engine oil filter W940, LF3402, Ø 93 mm, height 142 mm, 3/4-16 UNF
Add to wishlist
€19,83 €16,38
Blue Print Air filter C13114/4
Blue Print
Air filter C13114/4
Add to wishlist
€37,09 €30,65 €16,38 €13,54
You save 56%
GRAMMER Tractor seat Compacto Basic S mechanical suspension fabric 400 mm
GRAMMER
Tractor seat Compacto Basic S mechanical suspension fabric 400 mm
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: Optional. Track gauge (mm): 227. Seat width (mm): 400. Fore/aft isolator: Option... More
Suspension: Mechanical. Upholstery type: Fabric. Seat contact switch: ...
Add to wishlist
€1.114,91 €921,41 €1.025,72 €847,70
You save 8%
Walterscheid Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Top drawbar rail 309 mm, pin Ø 22 mm, coupling pin 31 mm
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 309 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
Add to wishlist
€1.104,81 €913,07 €873,47 €721,88
You save 21%
Air filter C13114/4
Air filter C13114/4
Add to wishlist
€31,84 €26,31
Bolt set 2de steering valve 3x M8 x 180
Bolt set 2de steering valve 3x M8 x 180
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Control unit. More
Technical data: 3x M8 x 180. Menke no.: 51682. Description: For 3rd Co...
Add to wishlist
€29,14 €24,08
Ball joint track rod taper 20 - 22 mm, 95 mm, M24 x 1,5
Ball joint track rod taper 20 - 22 mm, 95 mm, M24 x 1,5
For track rod. Taper Ø (mm): 20 - 22. Length (mm): 95. Screw-in thread: M24 x 1.5. More
For track rod. Taper Ø (mm): 20 - 22. Length (mm): 95. Screw-in threa...
Add to wishlist
€79,66 €65,83 €73,29 €60,57
You save 8%
Walterscheid Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
Walterscheid
Inner part ball 80 rail width 309 mm, pin Ø 22 mm, 3000 kg
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for connection to ball hitches 80 according to ISO 24347. The 80 mm diameter ball can be... More
D-value (kN): 89.3 | Colour: Black | Assembly notes: Suitable for conn...
Add to wishlist
€2.146,48 €1.773,95 €1.697,03 €1.402,50
You save 21%
LUK Thrust bearing driving clutch 65 x 96 x 23 mm
LUK
Thrust bearing driving clutch 65 x 96 x 23 mm
Dimensions (mm): 65 x 96 x 23 More
Dimensions (mm): 65 x 96 x 23
Add to wishlist
€162,37 €134,19 €149,38 €123,45
You save 8%
Seal kit additional control unit SB7 O-ring and back-up ring outer
Seal kit additional control unit SB7 O-ring and back-up ring outer
Add to wishlist
€19,85 €16,41
Scharmüller Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Scharmüller
Automatic hitch 330 mm, coupling pin 38 mm, 2000 kg, 97,1 kN
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 38 mm. Load capacity: 2000 kg. D-value: 97,1 kN. Colour: Black. Descript... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
Add to wishlist
€1.439,23 €1.189,45 €1.324,09 €1.094,29
You save 8%
LUK Thrust bearing PTO clutch 106 x 140 x 25 mm
LUK
Thrust bearing PTO clutch 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
Add to wishlist
€226,14 €186,89 €208,05 €171,94
You save 8%
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Thrust bearing driving clutch closed version 65 x 97 x 23 mm
Dimensions (mm): 65 x 97 x 23 More
Dimensions (mm): 65 x 97 x 23
Add to wishlist
€82,54 €68,21 €75,94 €62,76
You save 8%
Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
Alternator 14 V / 65 A, flange 56 mm Deutz-Fahr, Fendt, Steyr
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 | Installation angle (°): l 60 | Nominal voltage (V): 14 | Direction of rotatio... More
Charging current (A): 65 | Mounting L / d / R (mm): 56,0 / 8,0 / 86,0 ...
Add to wishlist
€170,34 €140,78 €156,71 €129,51
You save 8%
FEBI Fuel filter WK842
FEBI
Fuel filter WK842
Add to wishlist
€19,60 €16,20 €8,47 €7,00
You save 57%
FEBI Thermostat Ø 38 x 38 x 38 x 8 mm, 87 °C Steyr 8055 - 8130
FEBI
Thermostat Ø 38 x 38 x 38 x 8 mm, 87 °C Steyr 8055 - 8130
To fit as: Steyr 8055, 8070, 8075, 8080, 8090, 8100, 8110, 8120, 8130 More
To fit as: Steyr 8055, 8070, 8075, 8080, 8090, 8100, 8110, 8120, 8130
Add to wishlist
€151,19 €124,95 €66,21 €54,72
You save 56%
Scharmüller Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M20
Scharmüller
Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M20
Load capacity: 2000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pattern: 160 x 100 mm. Guide width: 32 mm. Plate height: 120 mm. Thread: M20. Colou... More
Load capacity: 2000 kg. D-value: 89,3 kN. Rail width: 330 mm. Hole pat...
Add to wishlist
€600,57 €496,34 €552,52 €456,63
You save 8%
GRAMMER Tractor seat air suspended Compacto COMFORT M fabric, seat width 470 mm
GRAMMER
Tractor seat air suspended Compacto COMFORT M fabric, seat width 470 mm
Thanks to the pneumatic suspension, the COMPACTO® COMFORT models ensure a noticeable increase in comfort for fatigue-free work and a healthy sitting ... More
Thanks to the pneumatic suspension, the COMPACTO® COMFORT models ensu...
Add to wishlist
€1.453,00 €1.200,83 €1.336,76 €1.104,76
You save 8%
Lift rod left 420 - 500 mm Steyr 540-768, 8045-8075
Lift rod left 420 - 500 mm Steyr 540-768, 8045-8075
Lifting strut without swivel. Dimensions (mm): Length = 420 - 500. More
Lifting strut without swivel. Dimensions (mm): Length = 420 - 500.
Add to wishlist
€297,86 €246,17 €274,03 €226,47
You save 8%
Scharmüller Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Scharmüller
Drawbar ball 50, rail 330 mm, pin Ø 25 mm, 250 kg
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load capacity: 250 kg. D-value: 31 kN. Overhang: 147 mm. Plate height: 150 mm. Hole: M20... More
Rail width: 330 mm. Guide width: 32 mm. Detent pin Ø: 25 mm. Load cap...
Add to wishlist
€907,92 €750,35 €835,29 €690,32
You save 8%
Scharmüller Forced steering double-sided 2 ton, 250 mm, K50, AGCO gray, 19 kg
Scharmüller
Forced steering double-sided 2 ton, 250 mm, K50, AGCO gray, 19 kg
Description: Approved for steering forces up to 20 kN (2 t) | Connection position: 250 mm | Steering power (t): 2 | Colour: AGCO grey | Lock: K50 | As... More
Description: Approved for steering forces up to 20 kN (2 t) | Connecti...
Add to wishlist
€1.144,45 €945,83 €1.052,89 €870,16
You save 8%
Thrust bearing closed version 106 x 140 x 25 mm
Thrust bearing closed version 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
Add to wishlist
€134,70 €111,32 €123,92 €102,42
You save 8%
Sealing ring 55 x 69 x 2 mm Steyr
Sealing ring 55 x 69 x 2 mm Steyr
Dimensions (mm): 55 x 69 x 2. More
Dimensions (mm): 55 x 69 x 2.
Add to wishlist
€17,44 €14,41
Yoke 330 mm, left-hand thread M30 x 3 L Steyr 540-768, 8045-8075
Yoke 330 mm, left-hand thread M30 x 3 L Steyr 540-768, 8045-8075
Lifting strut without swivel. Dimensions (mm): Length = 330. Left-hand thread M30 x 3 L. More
Lifting strut without swivel. Dimensions (mm): Length = 330. Left-hand...
Add to wishlist
€32,95 €27,23 €30,31 €25,05
You save 8%
Calix Engine preheater complete Ø 30 mm press Steyr, Yanmar
Calix
Engine preheater complete Ø 30 mm press Steyr, Yanmar
To fit as: Steyr 8055, 8060, 8065, 8070, 8075, 8080, 8090, 8110, 8130, 8150, 8165, 8180 More
To fit as: Steyr 8055, 8060, 8065, 8070, 8075, 8080, 8090, 8110, 8130,...
Add to wishlist
€306,32 €253,16 €281,81 €232,90
You save 8%
Walterscheid Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Walterscheid
Ball hitch ball 80, rail width 309 mm, pin Ø 22 mm, 2800 kg
Description: This product is a ball hitch. The hitch ball 80 dimensions and areas of application comply with ISO 24347, VO (EU) 2015/208 and UN ECE R1... More
Description: This product is a ball hitch. The hitch ball 80 dimension...
Add to wishlist
€2.071,98 €1.712,38 €1.638,13 €1.353,83
You save 21%
LUK Double clutch 280 / 280TGU6 45 x 50 mm, 24 splines, chain pitch 49 mm
LUK
Double clutch 280 / 280TGU6 45 x 50 mm, 24 splines, chain pitch 49 mm
web (mm): 49 | Flywheel dimension (mm): 2 | Dimensions (mm): 45 x 50 24 grooves More
web (mm): 49 | Flywheel dimension (mm): 2 | Dimensions (mm): 45 x 50 2...
Add to wishlist
€1.293,65 €1.069,13 €1.190,16 €983,60
You save 8%
SACHS Clutch plate 295, 28 x 32 mm, 17 splines Steyr
SACHS
Clutch plate 295, 28 x 32 mm, 17 splines Steyr
Dimensions (mm): 28 x 32 17 grooves More
Dimensions (mm): 28 x 32 17 grooves
Add to wishlist
€523,49 €432,64 €481,61 €398,03
You save 8%
SACHS Thrust bearing 106 x 140 x 25 mm
SACHS
Thrust bearing 106 x 140 x 25 mm
Dimensions (mm): 106 x 140 x 25 More
Dimensions (mm): 106 x 140 x 25
Add to wishlist
€205,54 €169,87 €189,10 €156,28
You save 8%
Clutch plate 295 B 28 x 32 mm, 17 splines
Clutch plate 295 B 28 x 32 mm, 17 splines
Dimensions (mm): 28 x 32, 17 grooves | Additional information: Made in Germany More
Dimensions (mm): 28 x 32, 17 grooves | Additional information: Made in...
Add to wishlist
€248,74 €205,57 €228,84 €189,12
You save 8%
Double clutch DuT 295 45 x 50 mm, 24 splines
Double clutch DuT 295 45 x 50 mm, 24 splines
Additional information: Made in Germany | Dimensions (mm): 45 x 50, 24 grooves | Flywheel dimension (mm): 2 (erhöht) | web (mm): 49 More
Additional information: Made in Germany | Dimensions (mm): 45 x 50, 24...
Add to wishlist
€1.022,57 €845,10 €940,76 €777,49
You save 8%
Clutch kit organic, flywheel 2 mm raised Case IH, Steyr
Clutch kit organic, flywheel 2 mm raised Case IH, Steyr
Contents: Clutch (445K88050101), organic disc (445S64410101), release bearing (44504080), release bearing (44504079) More
Contents: Clutch (445K88050101), organic disc (445S64410101), release ...
Add to wishlist
€1.498,75 €1.238,64 €1.378,85 €1.139,55
You save 8%
MAHLE Starter motor 12 V, 3,0 kW, 9 teeth, Ø 82,5 mm, 270 mm, clockwise
MAHLE
Starter motor 12 V, 3,0 kW, 9 teeth, Ø 82,5 mm, 270 mm, clockwise
Add to wishlist
€612,55 €506,24 €366,89 €303,21
You save 40%
Starter motor 12V 3,0 kW, 9 teeth clockwise, 271,5 mm
Starter motor 12V 3,0 kW, 9 teeth clockwise, 271,5 mm
Add to wishlist
€316,48 €261,55 €291,16 €240,63
You save 8%
Bosch/Rexroth Hydraulic pump anticlockwise 19 cm³/rpm., claw Ø 17,8 x 8 Case IH, Steyr
Bosch/Rexroth
Hydraulic pump anticlockwise 19 cm³/rpm., claw Ø 17,8 x 8 Case IH, Steyr
Output volume: 19 cc/rev. Drive shaft: Claw, Ø 17.8 x 8. Operating pressure max.: 210 bar. Direction of rotation: Anticlockwise. Min. speed: 500 1/mi... More
Output volume: 19 cc/rev. Drive shaft: Claw, Ø 17.8 x 8. Operating pr...
Add to wishlist
€618,55 €511,20 €569,07 €470,30
You save 8%
Scharmüller Inserts K80 ball 330/25/32 mm, nose weight 2000 kg, black
Scharmüller
Inserts K80 ball 330/25/32 mm, nose weight 2000 kg, black
To fit as: Mercedes Benz MB Trac, Unimog, IHC / International / Case IH etc. More
To fit as: Mercedes Benz MB Trac, Unimog, IHC / International / Case I...
Add to wishlist
€1.548,70 €1.279,92 €1.424,80 €1.177,52
You save 8%
HELLA Indicator/position light left 95 x 85 x 54 mm, 12V21WK / R21W Claas
HELLA
Indicator/position light left 95 x 85 x 54 mm, 12V21WK / R21W Claas
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Attachment: Front. Connection: Blade terminal. Width: 95 mm. Form: Rectangular, two s... More
Bulb: P21W, 12V5WS / C5W, 12V21WK / R21W. Colour: Yellow, white. Attac...
Add to wishlist
€59,85 €49,46 €57,64 €47,64
You save 4%
LUK Clutch kit double plate connection Steyr 8055 - 8085, 31 kg
LUK
Clutch kit double plate connection Steyr 8055 - 8085, 31 kg
Supplementary set: Without release bearing | Connection: For vehicles with double-disc clutch | Contents: Pressure plate 458230002211, clutch plate 45... More
Supplementary set: Without release bearing | Connection: For vehicles ...
Add to wishlist
€1.428,04 €1.180,20 €1.313,80 €1.085,78
You save 8%
Stabilus Gas strut door 300 N, 315 mm, stroke 108 mm Case IH, Steyr
Stabilus
Gas strut door 300 N, 315 mm, stroke 108 mm Case IH, Steyr
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm): 8 | B (mm): 165 | d2 (mm): 19 | To fit: Door | Stroke (mm): 108 More
C (mm): 8 | D (mm): 8 | Newtons: 300 | A (mm): 315 | Form: 6 | d1 (mm)...
Add to wishlist
€138,26 €114,26 €127,20 €105,12
You save 8%
MAHLE Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
MAHLE
Alternator 14 V / 65 A, flange 56 mm, form B Deutz-Fahr, Fendt, Steyr
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additional information: Dust-tight | Installation angle (°): l 60 | Mounting L / d / R... More
Nominal values (V / A): 14 / 65 | Direction of rotation: ↻ | Additio...
Add to wishlist
€326,57 €269,89 €195,60 €161,65
You save 40%
LUK Clutch plate 295USF 28 x 32 mm, 17 splines, Steyr 8055 - 8085
LUK
Clutch plate 295USF 28 x 32 mm, 17 splines, Steyr 8055 - 8085
Material specifications: Organic clutch lining | Dimensions (mm): 28 x 32 17 grooves More
Material specifications: Organic clutch lining | Dimensions (mm): 28 x...
Add to wishlist
€339,90 €280,91 €312,71 €258,44
You save 8%
LUK Clutch plate 280USF 28 x 32 mm, 17 splines, organic Steyr
LUK
Clutch plate 280USF 28 x 32 mm, 17 splines, organic Steyr
Dimensions (mm): 28 x 32 17 grooves | Material specifications: Organic clutch lining More
Dimensions (mm): 28 x 32 17 grooves | Material specifications: Organic...
Add to wishlist
€201,43 €166,47 €185,32 €153,15
You save 8%
Clutch plate 280 B 28 x 32 mm, 17 splines Steyr 8055 - 8075
Clutch plate 280 B 28 x 32 mm, 17 splines Steyr 8055 - 8075
Dimensions (mm): 28 x 32, 17 grooves | Additional information: Made in Germany More
Dimensions (mm): 28 x 32, 17 grooves | Additional information: Made in...
Add to wishlist
€159,00 €131,41 €146,28 €120,89
You save 8%
Showing 1 - 48 of 139
Brands
  • View more
Price
Min Max
Close
© Copyright 2026 Techniek Totaal
Choose your language
Choose your currency
€

My account

Forgot your password?
or

Recently added

Total incl. tax
€0,00
View cart (0) Proceed to checkout
0
Compare
Start comparison
This product has been added to your cart
Proceed to checkout Continue shopping