Menu
EUR

Steyr 4145 Profi tractor parts & technical data

The Steyr 4145 Profi has its own selection of more than 70 parts here. Electrics, steering and front axle parts, and trailer couplings are easy to find.

74 parts found for Steyr 4145 Profi
Show:
Wabco Solenoid valve 3/2-way, 12 V, 1,41 A, M16 x 1,5, standard closed
Wabco
Eligible: Environmental protection and safety (formerly de minimis) More
Eligible: Environmental protection and safety (formerly de minimis)
€408,59 €337,68 €375,90 €310,66
You save 8%
Rear-view mirror 487 x 228 x 130 mm, heated, 12 V, right
Dimensions: 487 x 228 x 130 mm. Height: 130 mm. Width: 228 mm. Length: 487 mm. Radius of curvature: 1200 / 300 mm. Version: Heated. Operating voltage:... More
Dimensions: 487 x 228 x 130 mm. Height: 130 mm. Width: 228 mm. Length:...
€297,60 €245,95 €273,79 €226,27
You save 8%
Sauermann Piton Fix rail 320 mm, locking pin Ø 30 mm, guide 20 mm, 3000 kg
Sauermann
Height adjustable, rotating bolt system to fit as System Sauermann. More
Height adjustable, rotating bolt system to fit as System Sauermann.
€1.736,14 €1.434,83 €1.647,25 €1.361,36
You save 5%
Wabco Trailer control valve 8 bar, M22 x 1,5, NW 10 mm
Wabco
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm): 10 More
Working pressure (bar): 8 | Connection: M22 x 1.5 | Nominal width (mm)...
€630,05 €520,70 €579,65 €479,05
You save 8%
Aircon compressor 12 V, pulley-Ø 112 mm, 4 grooves
Oil quantity (ccm): 200 | Pulley Ø (mm): 112 | Suitable oil: PAG 46 | Refrigerant: R 134a | Nominal voltage (V): 12 | No. of grooves: 4 | Fixing: DM More
Oil quantity (ccm): 200 | Pulley Ø (mm): 112 | Suitable oil: PAG 46 |...
€514,66 €425,34 €473,49 €391,31
You save 8%
MAHLE Starter motor with reduction 12 V, 4,2 kW, 10 teeth, clockwise
€569,59 €470,74 €511,72 €422,91
You save 10%
FEBI Temperature sensor -40 up to 850 °C, curved, length 50 mm
FEBI
Version: -40 to 850°C More
Version: -40 to 850°C
€172,44 €142,51 €68,45 €56,57
You save 60%
MAHLE Air conditioning compressor 12 V, pulley Ø 116 mm, 4 grooves, PAD
MAHLE
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | Additional information: With sealing ring | Connection: PAD | Suitable oil: PAG ... More
Nominal voltage (V): 12 | Refrigerant: R 134a | Pulley Ø (mm): 116 | ...
€547,60 €452,56 €327,99 €271,06
You save 40%
Airco compressor 12 V, R 134a, pulley Ø 112 mm, PV4, 200 ccm oil
Pulley Ø (mm): 112 | Oil quantity (ccm): 200 | Suitable oil: PAG 46 | No. of grooves: PV4 | Nominal voltage (V): 12 | Refrigerant: R 134a | Cylinder ... More
Pulley Ø (mm): 112 | Oil quantity (ccm): 200 | Suitable oil: PAG 46 |...
€454,21 €375,38 €417,87 €345,35
You save 8%
Fender bracket right rotatable complete Case IH, Steyr, New Holland
€593,54 €490,53 €546,06 €451,29
You save 8%
Sauermann Drawbar 38 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN, drawbar eye Ø 40 mm
Sauermann
Ø 40 mm drawbar eye, Ø 38 mm pin More
Ø 40 mm drawbar eye, Ø 38 mm pin
€877,53 €725,23 €807,33 €667,21
You save 8%
LED low beam light oval 12/24 V, 24 W, 750 lm, 143 x 92 x 98 mm
Power (watts): 24 | Mounting size (mm): 166 | Bulb: LED | Form: Oval | Fixing: Bracket, stainless steel | EMC: CISPR 25 class 3 | Width (mm): 143 | Th... More
Power (watts): 24 | Mounting size (mm): 166 | Bulb: LED | Form: Oval |...
€88,60 €73,22 €81,51 €67,37
You save 8%
SANDEN Aircon compressor 12 V, Ø 112 mm, 4 grooves Case IH, New Holland, Steyr
SANDEN
Oil quantity (ccm): 200 | Suitable oil: SP 10 | Additional information: incl. O-ring seal | Fixing: DM | No. of grooves: 4 | Pulley Ø (mm): 112 | Ref... More
Oil quantity (ccm): 200 | Suitable oil: SP 10 | Additional information...
€683,86 €565,17 €629,15 €519,96
You save 8%
Seal kit hydraulic steering Case IH, Steyr, New Holland
€136,55 €112,85 €125,63 €103,82
You save 8%
Outlet valve Case IH, Steyr
Rail pressure sensor Case IH, Steyr, New Holland
€318,56 €263,27 €293,08 €242,21
You save 8%
Sauermann Drawbar ball 80, rail width 320 mm, guide 19 mm, 3000 kg
Sauermann
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load capacity: 3000 kg. Colour: Black. D-value: 92 kN. Version: Pivot bolt. Lock: ball... More
Rail width: 320 mm. Detent pin Ø: 30,5 mm. Guide width: 19 mm. Load c...
€1.594,08 €1.317,42 €1.516,55 €1.253,35
You save 5%
Wabco Air tank 15 l, Ø 246 mm, M22 x 1,5, 4 connections
€148,56 €122,78 €142,37 €117,66
You save 4%
MAHLE Alternator 14 V, 200 A, flange 82 mm Case IH, New Holland, Steyr
MAHLE
Charging current (A): 200 | Installation angle (°): r 68 | Form: A | Additional information: Compact alternator, dust-tight, with toroidal coil, coil... More
Charging current (A): 200 | Installation angle (°): r 68 | Form: A | ...
€872,03 €720,69 €522,30 €431,65
You save 40%
MAHLE Alternator 14 V, 150 A, pulley-Ø 61 mm Case IH, New Holland, Steyr
MAHLE
Nominal values (V / A): 14 / 150 | Form: A | Belt width (mm) / type: PV x 8 | Mounting L / d / R (mm): 82,0 / 8,2 / 90,0 | Charging current (A): 150 |... More
Nominal values (V / A): 14 / 150 | Form: A | Belt width (mm) / type: P...
€662,11 €547,20 €396,56 €327,74
You save 40%
Vitesco NOX sensor M20 x 1,5, 615 mm, 12 / 24 V Case IH, New Holland, Steyr
€840,94 €694,99 €773,66 €639,39
You save 8%
Track rod complete A 1564,5 mm, B M18 x 1,5, D M18 x 1,5, E 40 mm
A: 1564,5 mm. B: M18 x 1,5 mm. C: 20 mm. D: M18 x 1,5 mm. E: 40 mm. More
A: 1564,5 mm. B: M18 x 1,5 mm. C: 20 mm. D: M18 x 1,5 mm. E: 40 mm.
€924,63 €764,16 €850,66 €703,02
You save 8%
Sensor AdBlue-quality Case IH, Steyr, New Holland
Description: For AdBlue quality. More
Description: For AdBlue quality.
€923,71 €763,40
Injection line 4 cylinders New Holland, Steyr, Case IH
€47,58 €39,32 €43,77 €36,18
You save 8%
Sauermann Drawbar 31 mm, 320 / 30 / 20 mm, 2000 kg, 97,1 kN
Sauermann
Supplied with individual certification Ø 30 mm pin More
Supplied with individual certification Ø 30 mm pin
€1.119,87 €925,51 €1.030,28 €851,47
You save 8%
Oil sump gasket Case IH, Steyr, New Holland
€48,74 €40,28 €44,84 €37,06
You save 8%
Window rubber clamping range 4 - 6 mm, 23,2 x 14,5 mm - 25 meter
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm. More
Clamping range: 4 - 6 mm. Length: 25 m. B: 23,2 mm. H: 14,5 mm.
€225,87 €186,67 €207,80 €171,74
You save 8%
Injector Landini, New Holland, Steyr
Engine types: F4HF E613D B006, F4HF P613A H001, F4HF P613B H005. More
Engine types: F4HF E613D B006, F4HF P613A H001, F4HF P613B H005.
€570,55 €471,53 €524,91 €433,81
You save 8%
Spring left fender Case IH, New Holland, Steyr
€51,26 €42,36 €47,16 €38,97
You save 8%
Ball joint taper 20 - 22,3 mm, M18 x 1,5, M24 x 1,5 L, 106 mm
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. Taper: 20 - 22,3 mm. More
A: 106 mm. C: M18 x 1,5 mm. D: M24 x 1,5 L mm. E: 20 mm. F: 22,3 mm. T...
€35,82 €29,60 €32,95 €27,24
You save 8%
LUK Torsion damper PTO shaft 8 teeth, 31,9 x 35
LUK
Number of teeth: 8. Tooth profile: 31.9x35. More
Number of teeth: 8. Tooth profile: 31.9x35.
€267,68 €221,22 €246,27 €203,53
You save 8%
Cylinder head gasket 1,2 mm engine F4DFE4, F4DGE4
€125,73 €103,91 €115,67 €95,60
You save 8%
Cylinder head gasket 1,1 mm thick New Holland, Steyr, Case IH
€126,71 €104,72 €116,57 €96,34
You save 8%
Rail pressure valve Case IH, Steyr, New Holland
€269,95 €223,10 €248,35 €205,25
You save 8%
Radiator hose, bottom Ø 50 mm, 329 mm Case IH, New Holland, Steyr
Inner Ø: 50 mm. Length: 329 mm. More
Inner Ø: 50 mm. Length: 329 mm.
€41,78 €34,53
CBM Mechanical top link cat. 3, 647 - 913 mm, M36 x 3
CBM
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm. K: 65 mm. H: 65 mm. Type: Tail hook/clevis joint. Top link type: mechanical. More
I: M36 x 3 mm. A cat.: 28. B cat.: 3 / 60. C: 410 mm. D: 647 - 913 mm....
€417,62 €345,14 €384,21 €317,53
You save 8%
Ring gear Ø 384/410 mm, 127 teeth Case IH, New Holland
Version: Ø 384/410 mm, 127 teeth. More
Version: Ø 384/410 mm, 127 teeth.
€284,35 €235,00 €261,60 €216,20
You save 8%
Air hose intercooler Ø 57 mm Case IH, Steyr, New Holland
€34,20 €28,26 €31,46 €26,00
You save 8%
AdBlue supply unit Case IH, Steyr, New Holland
Description: AdBlue supply units ensure even metering of AdBlue depending on the load on the common rail engine. It is important that only filtered ur... More
Description: AdBlue supply units ensure even metering of AdBlue depend...
€1.623,63 €1.341,84 €1.493,74 €1.234,50
You save 8%
Temperature sensor -40 up to 850 °C, curved, 50 mm, with resistor
Description: Oxidation catalyst. Version: -40 to 850°C. More
Description: Oxidation catalyst. Version: -40 to 850°C.
€117,72 €97,29 €108,30 €89,51
You save 8%
Seal Case IH, Steyr
Showing 1 - 48 of 74

Steyr 4145 Profi parts: engine, cooling and fenders

Servicing a Steyr 4145 Profi quickly comes down to the engine. A head gasket lets go, an injection line starts to weep, or the NOX sensor throws a fault. On this page there are more than 70 parts for this tractor, plus parts for the fenders, the cab and the hitch, from GRANIT, Sauermann, MAHLE, Wabco and CBM.

Cylinder head, fuel and exhaust

For the head there are cylinder head gaskets, cylinder head bolts and valve cover gaskets. On the fuel side you will find injection lines, and the cooling system is covered with radiator hoses such as the top hose and temperature sensors. If the exhaust aftertreatment is reporting a problem, there is a NOX sensor for it too. An air conditioning compressor, an alternator, sealing rings and a tank cap complete the picture for this model.

A tip if the head is coming off: always fit new cylinder head bolts. They are stretched on purpose during tightening and are not meant to be reused. Tighten them in the specified sequence and in stages, working from the centre outwards, with a torque wrench and the angle turn that applies to the engine. Clean the faces of head and block thoroughly and keep them dry, without using an abrasive disc, so the new gasket seals evenly. A straight edge across the head tells you whether it is still flat.

Fenders and drawbar

The steering front fenders hang on fender brackets, springs and pivots that develop play over time, and all of these can be replaced. There are drawbars for the trailer as well. Play usually announces itself as a rattling fender or one that rubs the tyre on full lock, and it is worth dealing with early, as a fender that tears loose does far more damage than a new spring.

Other Profi tractors and choosing correctly

Steyr made the Profi line in many versions and the model numbers sometimes differ only slightly. Reading the type plate settles which of them is parked in your shed. When in doubt, use the reference number from the old part, which on engine gaskets is often printed on the gasket or its packaging. Fitting position matters too, for example upper or lower on a valve cover gasket.

Each of these Profi models has a page of its own:

The Steyr 4120 Profi and 6145 Profi belong to the same line. For the whole brand, Profi or not, go to Steyr parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart