More than 80 parts on this page fit the Claas Arion 630 from the Arion range, including trailer couplings and three-point linkage parts.
Ball, clevis, piton or flange: the back of a Claas Arion 630 can carry all sorts of hitches, depending on what the farm pulls. The more than 80 Claas Arion 630 parts on this page show exactly that. They come from specialists such as Scharmüller, Walterscheid and ROCKINGER for the hitching side, and from GRAMMER and PROBOSS for the seats.
For the Arion 630 you will find drawbars, including a ball version, automatic hitches, a Piton Fix, flange hitches and top drawbars. To fit or convert a system there are drawbar frames, height adjustable adapter plates and support plates. If you pull a trailer with forced steering, there are parts for the forced steering and ball inserts as well.
A tip for ball hitches: keep the ball and its socket lightly greased and check the play at every service. A worn ball or socket sends jolts through the combination and then wears out even faster. Ideally replace the ball and the insert together, so they fit snugly again.
On an automatic hitch the weak spots are usually the coupling pin and the catch mouth. If the pin no longer drops fully by itself, clean and grease the mechanism before you replace anything. Often it is just dirt and old grease.
In the cab of the Arion 630, wear shows up in the things you use every day. There are air suspended tractor seats such as the Maximo Dynamic, seats with fabric covers and a PROBOSS seat with seat heating. You will also find an air conditioning compressor.
Run the air conditioning for a few minutes now and then in winter too. The refrigerant carries oil around the system, and that oil keeps the compressor seals supple. If the compressor does need replacing, have an air conditioning specialist evacuate and refill the system so no moisture is left inside.
Check the type plate on your tractor for the type and serial number. With hitch parts it also pays to measure the old part and note the reference number on it. That way you know the rail, pin and hole pattern will match.
The Arion 630 is part of the Claas Arion series. Other types in that range each have their own page with their own parts:
For every other tractor from the brand, go to Claas parts.
