Menu
EUR

Massey Ferguson 185 tractor parts & technical data

Keep your Massey Ferguson 185 working with more than 350 matching parts. Vintage parts, lighting and electrics for the 100 series are gathered on one page.

399 parts found for Massey Ferguson 185
Show:
Perkins Sealing ring crankshaft rear Ø 130 x 159 x 11 mm
6%
Perkins
Sealing ring crankshaft rear Ø 130 x 159 x 11 mm
€84,05 €69,46 €78,75 €65,08
 
GRANIT Heating element John Deere, Massey Ferguson, McCormick
5%
GRANIT
Heating element John Deere, Massey Ferguson, McCormick
€284,36 €235,01 €270,10 €223,22
 
KS Piston ring set 5 rings, Ø 94,48 mm, 2,39/2,39/2,39/6,34/6,34 mm
5%
KS
Piston ring set 5 rings, Ø 94,48 mm, 2,39/2,39/2,39/6,34/6,34 mm
Dimensions: 5 rings, Ø 94.48 mm  2.39 mm / 2.39 mm / 2.39 mm / 6.34 mm / 6....
€44,65 €36,90 €42,40 €35,04
 
VICTOR REINZ Crankshaft seal rear Ø 133,3 x 158,7 x 12,7 mm
VICTOR REINZ
Crankshaft seal rear Ø 133,3 x 158,7 x 12,7 mm
€24,40 €20,17
 
VICTOR REINZ Oil sump gasket Massey Ferguson 168-6255
VICTOR REINZ
Oil sump gasket Massey Ferguson 168-6255
€38,65 €31,94
 
Air hose Massey Ferguson 165-185
5%
Air hose Massey Ferguson 165-185
€51,72 €42,74 €49,10 €40,58
 
GRANIT V-belt Massey Ferguson 133-188
GRANIT
V-belt Massey Ferguson 133-188
€9,95 €8,22
 
Optibelt V-belt engine cooling Massey Ferguson 133-188
Optibelt
V-belt engine cooling Massey Ferguson 133-188
€12,25 €10,12
 
GRANIT Flame glow plug 12 V, 12,5 A, thread 7/8" - 14 UNF / 3/8" - 24 UNF
5%
GRANIT
Flame glow plug 12 V, 12,5 A, thread 7/8" - 14 UNF / 3/8" - 24 UNF
MLT 626 - Serie 2
€32,95 €27,23 €31,30 €25,87
 
GRANIT Silencer vertical 1130 mm, inner-Ø 54 mm, Massey Ferguson
5%
GRANIT
Silencer vertical 1130 mm, inner-Ø 54 mm, Massey Ferguson
Version: Length: 1130 mm, Inner Ø: 54 mm, Outlet Ø: 45 mm. A: 58 mm. B: 54 mm. C...
€81,57 €67,41 €77,45 €64,01
 
GRANIT Glow plug 12 V, 18 A, thread 7/8 inch - 14 UNF Massey Ferguson
GRANIT
Glow plug 12 V, 18 A, thread 7/8 inch - 14 UNF Massey Ferguson
Version: 12 V, 18 A, thread 7/8" - 14 UNF. Menke no.: 70723.
€33,70 €27,85
 
GRANIT Counterweight with 4 fixing bolts Landini, Massey Ferguson, Perkins
5%
GRANIT
Counterweight with 4 fixing bolts Landini, Massey Ferguson, Perkins
€504,63 €417,05 €479,35 €396,16
 
Cylinder head bolt 1/2" x 124 mm Massey Ferguson, Perkins
Cylinder head bolt 1/2" x 124 mm Massey Ferguson, Perkins
Dimensions: 1/2" x 124 mm.
€67,85 €56,07
 
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm.
€22,70 €18,76
 
Feed pump 4 hole, hole spacing 25/45 mm, flange up to lever 34 mm
Feed pump 4 hole, hole spacing 25/45 mm, flange up to lever 34 mm
Version: 4 holes, Vertical hole spacing: 25 mm, Horizontal hole spacing: 45 mm, ...
€27,75 €22,93
 
GRANIT Bolt set additional control unit 4x M8 x 110 Massey Ferguson
GRANIT
Bolt set additional control unit 4x M8 x 110 Massey Ferguson
Technical data: 4x M8 x 110.
€36,90 €30,50
 
GRANIT Gasket hefhuisblok Massey Ferguson 133-2635
GRANIT
Gasket hefhuisblok Massey Ferguson 133-2635
€4,56 €3,77
 
Lift rod Massey Ferguson 130-188
5%
Lift rod Massey Ferguson 130-188
€89,06 €73,60 €84,60 €69,92
 
GRANIT Yoke 14-1/8" x 1" x 3/4", length 395 mm Massey Ferguson
5%
GRANIT
Yoke 14-1/8" x 1" x 3/4", length 395 mm Massey Ferguson
Dimensions: 14 1/8" x 1" x 3/4" mm. Hole: 19 mm. Length: 395 mm. Fork inner widt...
€43,38 €35,85 €41,20 €34,05
 
Tractormeter Ø 88 mm
5%
Tractormeter Ø 88 mm
Version: Ø 88 mm.
€33,15 €27,40 €31,45 €25,99
 
Showing 289 - 312 of 399

Massey Ferguson 185 parts

Keeping an MF 185 working comes down to the basics: cooling, clutch, exhaust and seals. This page lists more than 350 replacement tractor parts for the Massey Ferguson 185, made by GRANIT and by brands such as LUK, Eaton, Cobo and KS.

How to identify the right part

The type plate confirms you have a 185. On a tractor that has been modified over the years, the old part is often a more reliable guide than the plate. Look for a reference number on seals, gaskets and the starter motor. With a starter motor, also count the pinion teeth and measure the hole spacing on the flange so the new unit lines up with the clutch housing.

Clutch work on the 185

For the clutch there are double clutch assemblies and clutch plates. If you are splitting the tractor anyway, do everything that wears in one go. Along with the double clutch and plate, fit a new release bearing and inspect the flywheel for scoring and blue heat marks. A new plate on a damaged flywheel will soon start slipping again. Before ordering, count the splines on the shaft and measure the hub of your old plate, because that is where clutch plates differ.

Cooling, exhaust and engine

Around the engine there are water pumps with their gaskets, radiator hoses including the top hose, a feed pump, an exhaust manifold, silencers and starter motors. Never fit a new water pump without a new gasket, and clean the mating face on the block thoroughly. Leftover gasket material is the usual reason a freshly fitted pump starts dripping again.

Seals, bearings and lighting

You will also find sealing rings for the front axle, seals for the lift arm shaft, O-rings and wheel bearings, plus headlight inserts and rear lights.

Replace wheel bearings as a set per wheel, inner and outer together, always with a new sealing ring. Press the outer races in square, use clean grease, then adjust so the wheel turns freely but shows no play when you rock it top and bottom. A front axle sealing ring reused during this job will often start leaking within a season.

More from the 100 series

If you also run another tractor from the same range, see the pages for the Massey Ferguson 148, Massey Ferguson 152, Massey Ferguson 175, Massey Ferguson 178 or Massey Ferguson 188. Each of those pages shows the parts listed for that model. The full overview is under Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart