Menu
EUR

Massey Ferguson 250 tractor parts & technical data

The Massey Ferguson 250 from the 200 series deserves parts that fit. Choose from more than 140 items, such as lighting, electrics, brakes and transmission.

145 parts found for Massey Ferguson 250
Show:
Perkins Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Perkins
Fuel filter outer-Ø 88 mm, inner-Ø 18 mm, height 72 mm
Outer Ø: 88 mm. Inner Ø: 18 mm. Height: 72 mm.
€19,25 €15,91
 
KS Piston set complete Ø 101,05 mm, piston pin 34,925 x 84,2 mm
5%
KS
Piston set complete Ø 101,05 mm, piston pin 34,925 x 84,2 mm
Dimensions: 4 rings, Ø 101.05 mm, gudgeon pin Ø 34.925 x 84.2 mm, combustion cha...
€252,16 €208,40 €239,55 €197,98
 
Injection nozzle engine Perkins 3.152
5%
Injection nozzle engine Perkins 3.152
Type formula: BDLL150S6602.
€41,87 €34,60 €39,75 €32,85
 
HELLA Oil pressure switch engine open function (NO) 1/8 inch NPT, 0,4 - 0,6 bar
HELLA
Oil pressure switch engine open function (NO) 1/8 inch NPT, 0,4 - 0,6 bar
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade terminal 6.3...
€10,75 €8,88
 
Pull switch hazard lights 12 V, 7 blade connections 6,3 mm
Pull switch hazard lights 12 V, 7 blade connections 6,3 mm
Version: Pull switch, Single circuit, red control button designed as a pilot lig...
€30,60 €25,29
 
GRANIT Sensor 1-pin, 1/8 inch NPT conical
GRANIT
Sensor 1-pin, 1/8 inch NPT conical
Version: 1-pin. Thread: 1/8” NPT, tapered.
€10,95 €9,05
 
LUK Thrust bearing 63,5 x 100 x 22 mm Ford, Massey Ferguson, New Holland
5%
LUK
Thrust bearing 63,5 x 100 x 22 mm Ford, Massey Ferguson, New Holland
Dimensions (mm): 63.5 x 100 x 22
€59,74 €49,37 €56,75 €46,90
 
GRANIT Water pump with gasket engine Perkins 3.144, 3.152
5%
GRANIT
Water pump with gasket engine Perkins 3.144, 3.152
€67,35 €55,66 €63,95 €52,85
 
Water pump with pulley and gasket flange-Ø 79,5 mm engine Perkins 3.152
5%
Water pump with pulley and gasket flange-Ø 79,5 mm engine Perkins 3.152
Dimensions: Flange Ø 79.5 mm. Version: With pulley and gasket.
€68,07 €56,26 €64,65 €53,43
 
GRANIT Oil pump Perkins engine 3.144, 3.152
5%
GRANIT
Oil pump Perkins engine 3.144, 3.152
€71,39 €59,00 €67,80 €56,03
 
GRANIT Piston ring set 5 rings, Ø 91,48 mm, only for cast iron bushes
GRANIT
Piston ring set 5 rings, Ø 91,48 mm, only for cast iron bushes
Dimensions: (only for cast liner), 5 rings, Ø 91.48 mm, 2.4 mm / 2.4 mm / 3.15 m...
€34,75 €28,72
 
Cobo Lamp glass right, left
Cobo
Lamp glass right, left
Installation location: Right, left.
€15,70 €12,98
 
GRANIT Start safety switch open function (NO), 3/4" UNF
GRANIT
Start safety switch open function (NO), 3/4" UNF
Version: Break contact, Thread: 3/4" UNF, 2 blade terminals.
€25,30 €20,91
 
GRANIT Thermostat Ø 54 mm, 82 °C
GRANIT
Thermostat Ø 54 mm, 82 °C
Ø (mm): 54 | Temperature (°C): 82
€17,95 €14,83
 
GRANIT Thrust bearing 63,5 x 100 x 22 mm Ford, Massey Ferguson, New Holland
5%
GRANIT
Thrust bearing 63,5 x 100 x 22 mm Ford, Massey Ferguson, New Holland
Dimensions (mm): 63.5 x 100 x 22
€36,12 €29,85 €34,30 €28,35
 
Brake disc Ø 224 mm, 27 teeth, thickness 5 mm, 50 km/h, for ceramic
Brake disc Ø 224 mm, 27 teeth, thickness 5 mm, 50 km/h, for ceramic
Notes: Please check the rear axle version and take this into account when orderi...
€38,45 €31,78
 
GRANIT Flywheel 115 teeth Massey Ferguson 133-550
GRANIT
Flywheel 115 teeth Massey Ferguson 133-550
Number of teeth: 115.
€882,15 €729,05
 
Oil drain valve thread 3/4 inch - 16UNF Massey Ferguson
Oil drain valve thread 3/4 inch - 16UNF Massey Ferguson
Thread: 3/4" - 16UNF.
€13,50 €11,16
 
Showing 25 - 48 of 145

Massey Ferguson 250 parts

On plenty of farms a Massey Ferguson 250 still earns its keep, doing yard work and lighter field jobs. To keep it running there are more than 140 replacement tractor parts that fit it, from GRANIT, Eaton, VICTOR REINZ, KS and LUK.

Cold starts and the engine

If your 250 struggles on a frosty morning, check the flame glow plug first. It only works when fuel reaches it, so inspect the feed and the sealing rings on the fuel line for leaks or air. For the engine itself there are complete pistons, piston ring sets and gaskets such as the one for the rear cover. Before ordering rings, find out which cylinder liners your engine has. Some ring sets are made only for cast iron liners and should not go into anything else.

Clutch, linkage and front axle

  • clutch plates for the driving clutch
  • seals for the lift arm shaft
  • pins for the top link cross and balls for the lower links
  • thrust bearings for the front axle
  • rubber buffers and an oil pressure switch

Lights for road work

There are rear lights, indicator and position lights, and headlight inserts. Once a lens cracks, moisture gets in, the reflector dulls and the beam fades. Fitting a fresh insert is usually quicker than trying to restore the old one.

Oil pressure and front axle

If the oil pressure light comes on at hot idle, do not assume the worst straight away. Fit a gauge in place of the switch and measure the real pressure first. If that reads fine, a new oil pressure switch is often all it needs. When the 250 steers heavily, or creaks as you turn the wheels with the front end jacked up, the front axle thrust bearing is the first suspect. A fresh bearing packed with grease makes the steering light again.

Getting the size right

The 250 is part of the Massey Ferguson 200 series. The serial number on the type plate helps narrow things down, but the part number on the old component, a seal or gasket for example, is the surest lead. Type it into the shop search and the right replacement appears. With a clutch plate, count the hub splines and check the diameter before you order.

Other models in the 200 series have their own pages too, so if there is more than one on the yard, order for each tractor from its own page:

The full list for the brand is at Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart