Menu
EUR

Massey Ferguson 250 tractor parts & technical data

The Massey Ferguson 250 from the 200 series deserves parts that fit. Choose from more than 140 items, such as lighting, electrics, brakes and transmission.

145 parts found for Massey Ferguson 250
Show:
As synchro unit 12-gears, 21 teeth, 406,4 mm Massey Ferguson
5%
As synchro unit 12-gears, 21 teeth, 406,4 mm Massey Ferguson
Number of teeth: 21. Length: 406,4 mm.
€122,03 €100,85 €115,90 €95,79
 
GRANIT Radiator hose, top inner-Ø 36 mm, length 150 mm Massey Ferguson
GRANIT
Radiator hose, top inner-Ø 36 mm, length 150 mm Massey Ferguson
Inner Ø: 36 mm. Length: 150 mm.
€5,65 €4,67
 
GRANIT Stud bolt cylinder head 7/16" x 108 mm Massey Ferguson 65-765
GRANIT
Stud bolt cylinder head 7/16" x 108 mm Massey Ferguson 65-765
Dimensions: 7/16" x 108 mm.
€19,40 €16,03
 
GRANIT Cylinder head gasket set upper engine AD3.152 Massey Ferguson, Eicher, Claas
5%
GRANIT
Cylinder head gasket set upper engine AD3.152 Massey Ferguson, Eicher, Claas
€44,56 €36,83 €42,30 €34,96
 
Bolt Massey Ferguson 133-4270
Bolt Massey Ferguson 133-4270
€11,65 €9,63
 
Threaded spindle left 3/4" thread, length 390 mm Massey Ferguson, Ford
5%
Threaded spindle left 3/4" thread, length 390 mm Massey Ferguson, Ford
Dimensions: 3/4" thread, Eye Ø = 16, Total length = 390 mm. Hole: 16 mm. Length:...
€36,37 €30,06 €34,55 €28,55
 
GRANIT Bearing three-point parts 19,4 x 41,6 x 12,7 mm Massey Ferguson, Ford
GRANIT
Bearing three-point parts 19,4 x 41,6 x 12,7 mm Massey Ferguson, Ford
Dimensions: 19.4 x 41.6 x 12.7 mm. Outer Ø: 41,28 mm. Inner Ø: 19,3 mm. Height 1...
€7,90 €6,53
 
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Start switch 12 V, Ø 16,5 mm, lock K 11-2 keys
Version: 12 V, with 4 blade terminal connections, Switch positions: 0: off, 1: c...
€15,45 €12,77
 
Rear light left P21W, P21/5W, 12 V
10%
Rear light left P21W, P21/5W, 12 V
Bulb: 12V21WK / P21W, 12V21/5WK / P21/5W. Form: Rectangular. Installation locati...
€69,42 €57,37 €62,80 €51,90
 
GRANIT Flame glow plugs 12 V, 18 A, thread 7/8" - 14 UNF Massey Ferguson 25-8780
GRANIT
Flame glow plugs 12 V, 18 A, thread 7/8" - 14 UNF Massey Ferguson 25-8780
To fit as: Massey Ferguson 133, 135, 148, 165, 168, 175, 178, 185, 188, 595, 101...
€27,95 €23,10
 
LUK Clutch plate 300USC 1 1/8" 10 splines, sintered Massey Ferguson
5%
LUK
Clutch plate 300USC 1 1/8" 10 splines, sintered Massey Ferguson
Dimensions (mm): 1 1/8” 10 grooves | Material specifications: Sintered clutch li...
€295,48 €244,20 €280,70 €231,98
 
GRANIT Alternator 14 V / 33 A, flange 27 mm John Deere, Lindner, Massey Ferguson
5%
GRANIT
Alternator 14 V / 33 A, flange 27 mm John Deere, Lindner, Massey Ferguson
Direction of rotation: ↻ | Belt tension hole Ø / R (mm): M6 / 83,0 | Nominal vol...
€131,50 €108,68 €124,90 €103,22
 
Eaton Fitting transmission 654 g
Eaton
Fitting transmission 654 g
Reference no.: 184770M3
€52,25 €43,18
 
Showing 73 - 96 of 145

Massey Ferguson 250 parts

On plenty of farms a Massey Ferguson 250 still earns its keep, doing yard work and lighter field jobs. To keep it running there are more than 140 replacement tractor parts that fit it, from GRANIT, Eaton, VICTOR REINZ, KS and LUK.

Cold starts and the engine

If your 250 struggles on a frosty morning, check the flame glow plug first. It only works when fuel reaches it, so inspect the feed and the sealing rings on the fuel line for leaks or air. For the engine itself there are complete pistons, piston ring sets and gaskets such as the one for the rear cover. Before ordering rings, find out which cylinder liners your engine has. Some ring sets are made only for cast iron liners and should not go into anything else.

Clutch, linkage and front axle

  • clutch plates for the driving clutch
  • seals for the lift arm shaft
  • pins for the top link cross and balls for the lower links
  • thrust bearings for the front axle
  • rubber buffers and an oil pressure switch

Lights for road work

There are rear lights, indicator and position lights, and headlight inserts. Once a lens cracks, moisture gets in, the reflector dulls and the beam fades. Fitting a fresh insert is usually quicker than trying to restore the old one.

Oil pressure and front axle

If the oil pressure light comes on at hot idle, do not assume the worst straight away. Fit a gauge in place of the switch and measure the real pressure first. If that reads fine, a new oil pressure switch is often all it needs. When the 250 steers heavily, or creaks as you turn the wheels with the front end jacked up, the front axle thrust bearing is the first suspect. A fresh bearing packed with grease makes the steering light again.

Getting the size right

The 250 is part of the Massey Ferguson 200 series. The serial number on the type plate helps narrow things down, but the part number on the old component, a seal or gasket for example, is the surest lead. Type it into the shop search and the right replacement appears. With a clutch plate, count the hub splines and check the diameter before you order.

Other models in the 200 series have their own pages too, so if there is more than one on the yard, order for each tractor from its own page:

The full list for the brand is at Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart