Menu
EUR

Massey Ferguson 355 tractor parts & technical data

Lighting and electrics are two of the groups for the Massey Ferguson 355. In total you can choose from more than 200 parts that fit this tractor model.

230 parts found for Massey Ferguson 355
Show:
Universal joint Ø 22,7/19,7 mm Massey Ferguson
Dimensions: Ø: 22.7/19.7 mm. More
Dimensions: Ø: 22.7/19.7 mm.
€39,93 €33,00
Sealing washer Ø 44,4 mm Ford, Massey Ferguson
Dimensions: Ø: 44.4 mm. More
Dimensions: Ø: 44.4 mm.
€1,55 €1,28
Temperature sensor 12 volt, thread 5/8 BSP
Version: Thread: 5/8" BSP. Thread: 5/8 BSP. More
Version: Thread: 5/8" BSP. Thread: 5/8 BSP.
€15,96 €13,19
Cobo Headlight left / right 12V45/40WAS / R2, built-in, screw fixing
Cobo
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation location: Left, right. Nominal voltage: 12 V. Test mark: ECE. Light function: Dipped b... More
Bulb: 12V45/40WAS / R2, or 12V45/40W halogen / R2. Installation locati...
€79,60 €65,79 €73,23 €60,52
You save 8%
Cobo Glass lamp left, right
Cobo
Installation location: Right, left. More
Installation location: Right, left.
€25,01 €20,67
Brake light switch mechanical M14 x 1,5, 12 V / 24 V
Version: Thread M14 x 1.5, F 12 V / 24 V,. More
Version: Thread M14 x 1.5, F 12 V / 24 V,.
€53,92 €44,56
Seal input shaft reversing clutch Ø 28,5 x 38,1 x 6,35 mm
Dimensions: 28,5 x 38,1 x 6,35 mm. Outer Ø: 38.1 mm. Inner Ø: 28,5 mm. Height 1: 6.35 mm. More
Dimensions: 28,5 x 38,1 x 6,35 mm. Outer Ø: 38.1 mm. Inner Ø: 28,5 m...
€4,33 €3,57
VICTOR REINZ Crankshaft seal rear Ø 133,3 x 158,7 x 12,7 mm
Radiator cap Ø 58 mm, height 26 mm, 0,5 bar
Neck Ø: 58 mm. Height: 26 mm. Opening pressure: 0,5 bar. More
Neck Ø: 58 mm. Height: 26 mm. Opening pressure: 0,5 bar.
€13,20 €10,91
Tank cap tank collar Ø 81 mm
Filler neck Ø: 81 mm. More
Filler neck Ø: 81 mm.
€34,94 €28,87
Throttle cable foot throttle A 1060 mm, B 935 mm Massey Ferguson 340-399
€20,03 €16,55
Crankshaft seal rear Ø 133,5 x 159 x 11 mm
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm. More
Outer Ø: 159 mm. Width: 11 mm. Inner Ø: 133,5 mm.
€23,70 €19,59
Hinge part for side windows Massey Ferguson Series 300-399
€43,91 €36,29 €40,40 €33,39
You save 8%
Handle inner, right Massey Ferguson Series 300-399
€111,78 €92,38 €102,84 €84,99
You save 8%
Handle side window, right Massey Ferguson Series 5S-8400
€61,11 €50,50 €56,22 €46,46
You save 8%
Key lock number WA10 - 2 pieces Massey Ferguson Series 300-399
€21,78 €18,00
Reservoir Massey Ferguson Series 300-9240
€107,96 €89,22 €99,32 €82,09
You save 8%
Cobo Lamp glass right, left
Cobo
Installation location: Right, left. More
Installation location: Right, left.
€13,89 €11,48
Headlight insert left / right 12V45/40WS R2, linkslenker traffic
Bulb: 12V45/40WS / R2. Additional information: Only for left-hand traffic.. More
Bulb: 12V45/40WS / R2. Additional information: Only for left-hand traf...
€68,94 €56,98 €63,42 €52,42
You save 8%
Cobo Relays N/O-contact 12 V / 40 A, 5-pin, without bracket, blade terminal
Cobo
Version: 12 V / 40 A, Without bracket, 5-pin, blade terminal 6.3 mm. More
Version: 12 V / 40 A, Without bracket, 5-pin, blade terminal 6.3 mm.
€20,91 €17,28
Start safety switch open function (NO), 3/4" UNF
Version: Break contact, Thread: 3/4" UNF, 2 blade terminals. More
Version: Break contact, Thread: 3/4" UNF, 2 blade terminals.
€26,44 €21,85
HELLA Lens, left / right - 2 pieces
HELLA
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399 More
To fit as: Massey Ferguson 350, 355, 360, 365, 375, 390, 398, 399
€31,76 €26,25
Needle bearing reversing clutch input shaft Ø 41,3 x 31,75 x 19,05 mm
Dimensions: 31,75 x 41,3 x 19,05 mm. Outer Ø: 41,3 mm. Inner Ø: 31.75 mm. Height 1: 19.05 mm. More
Dimensions: 31,75 x 41,3 x 19,05 mm. Outer Ø: 41,3 mm. Inner Ø: 31.7...
€31,55 €26,07
Double cutting ring inner-Ø 8 mm, outer-Ø 10,6 mm, length 6,25 mm
Inner Ø: 8 mm. Outer Ø: 10,6 mm. Length: 6,25 mm. More
Inner Ø: 8 mm. Outer Ø: 10,6 mm. Length: 6,25 mm.
€1,61 €1,33
Showing 193 - 230 of 230

Keeping a Massey Ferguson 355 running: parts by area

More than 200 replacement parts on this page fit the Massey Ferguson 355, supplied by GRANIT and by brands including Eaton, Cobo, HELLA and MAHLE. They cover the jobs that come up on a working 355: a starter that drags, a lift arm shaft that weeps oil, steering with play in it or a cab window that has worked loose.

Engine, electrics and driveline

For the engine there are sealing rings for the injection nozzles, exhaust gaskets, bolts and thrust washers. On the electrical side you will find alternators and starter motors. The driveline is covered by clutch plates, gear wheels and yokes.

Workshop tip: the copper sealing ring under each injector deforms when it is tightened, so it only seals properly once. Whenever an injector comes out, fit a new ring rather than reusing the old one. A weeping injector seat very often comes down to exactly that.

Linkage, steering and cab

The linkage is covered by lift arm shaft seals and gear wheels for the lift mechanism, the steering by ball joints. In the cab there are side window handles, gas struts, lens glasses and glazing repair sets with primer for bonding a window back in. Clean the window frame thoroughly before applying the sealant, or it will not bond to the old paint and the glass will start to rattle again.

When the lift arm shaft leaks

Oil seeping out around the lift arm shaft means the seals on that shaft are due. Do both sides while it is apart, and check the shaft where the seal runs for rust or scoring, since a rough surface will chew through a new seal quickly. Wipe the new seal with a little hydraulic oil before fitting it. Have a look at the gear wheels in the lift mechanism at the same time, as chipped or sharpened teeth make the linkage rise in jerks.

Matching the part to your tractor

Check the type plate first to confirm you have a 355 and not a neighbouring model. After that, the old part is your best guide. Seals, bolts and gear wheels often carry a Massey Ferguson reference number that you can compare with the replacement. With an alternator or starter, look at the mounting and the connections, and with a clutch plate at the diameter and the number of splines on the input shaft.

The Massey Ferguson 365 from the same 300 series has a page of its own, which is useful if both tractors share your yard and you want to see what fits each one. For every other model of the brand, start from all Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison
This product has been added to your cart