Menu
EUR

Massey Ferguson 4708 tractor parts & technical data

Whether it is electrics, a trailer coupling or lighting you need for the Massey Ferguson 4708, this page lists more than 70 parts for the 4700 series tractor.

68 parts found for Massey Ferguson 4708
Show:
GRANIT Cardan shaft bearing 36 x 72 x 43 mm Massey Ferguson 5425-6455
5%
GRANIT
Cardan shaft bearing 36 x 72 x 43 mm Massey Ferguson 5425-6455
€50,69 €41,89 €48,15 €39,79
 
DANA Spicer Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
DANA Spicer
Wheel bolt M18 x 1,5, 60 mm final drive front axle 730
Length (mm): 60 | Thread: M18 X 1,5
€15,55 €12,85
 
Collet set Valtra-Valmet 255-865
Collet set Valtra-Valmet 255-865
€5,45 €4,50
 
GRANIT Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
GRANIT
Thermostat Ø 67 mm, 83 °C Fendt, Massey Ferguson
Ø: 67 mm. Temperature: 83 °C.
€38,30 €31,65
 
Walterscheid Piton Fix rail width 311 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
21%
Walterscheid
Piton Fix rail width 311 mm, locking pin Ø 22 mm, 3000 kg, 89,3 kN
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Load capacity: 3000...
€1.843,50 €1.523,55 €1.448,45 €1.197,07
 
GRANIT Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
GRANIT
Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
Version: 12 V / 50 A, With bracket, 4-pin, blade terminal 6.3 mm.
€31,60 €26,12
 
Walterscheid Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
21%
Walterscheid
Adapter plate rail width 311 mm, hole pattern 140 x 80 mm, M20
Hole pattern (mm): 140 x 80 | Colour: Black | D-value (kN): 89,3 | Guide width (...
€790,57 €653,36 €621,15 €513,35
 
Scharmüller Drawbar frame standard 97,1 kN, 330 mm, ball 80
Scharmüller
Drawbar frame standard 97,1 kN, 330 mm, ball 80
Colour: Black | Rail width (mm): 330 | Category: Bearing supports | D-value (kN)...
€3.271,95 €2.704,09
 
Inlet valve engine Sisu 320-620
5%
Inlet valve engine Sisu 320-620
€36,60 €30,25 €34,75 €28,72
 
GRANIT Oil drain valve M18 x 1,5
5%
GRANIT
Oil drain valve M18 x 1,5
Thread: M18 x 1.5.
€65,32 €53,98 €62,00 €51,24
 
Oil pressure switch oil filter steering 12 / 24 V, with seal ring
5%
Oil pressure switch oil filter steering 12 / 24 V, with seal ring
Version: With sealing ring, operating voltage 12/24 V. Menke no.: 210021.
€222,19 €183,63 €211,00 €174,38
 
Scharmüller Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Scharmüller
Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour: Schwarz | ...
€1.287,16 €1.063,77
 
Mirror 263 x 160 mm, unheated, manual, rod-Ø 10 - 24 mm
5%
Mirror 263 x 160 mm, unheated, manual, rod-Ø 10 - 24 mm
Dimensions: 263 x 160 mm. Height: 263 mm. Width: 160 mm. Version: Left or right ...
€34,50 €28,51 €32,75 €27,07
 
GRANIT Potentiometer for accelerator and clutch pedal
5%
GRANIT
Potentiometer for accelerator and clutch pedal
Version: For accelerator and clutch pedal.
€172,34 €142,43 €163,70 €135,29
 
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
5%
Thermostat Ø 67 mm, 83 °C Massey Ferguson, Case IH, Steyr
Ø: 67 mm. Temperature: 83 °C.
€36,87 €30,47 €35,00 €28,93
 
Cylinder head gasket engine Sisu 420
5%
Cylinder head gasket engine Sisu 420
€146,11 €120,75 €138,80 €114,71
 
GRANIT Hydraulic top link cat. 2/2, 500 - 689 mm, stroke 189 mm, Ø 63 mm
5%
GRANIT
Hydraulic top link cat. 2/2, 500 - 689 mm, stroke 189 mm, Ø 63 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 500 / 689 mm. Piston rod Ø D: 35 mm. Cyli...
€553,83 €457,71 €526,10 €434,79
 
GRANIT Horn 12 V with bracket, Ø 97 mm, blade terminal 2 x 6,3 mm
GRANIT
Horn 12 V with bracket, Ø 97 mm, blade terminal 2 x 6,3 mm
To fit as: Massey Ferguson 230, 231, 240, 243, 250, 253, 260, 263, 270, 275, 283...
€23,70 €19,59
 
MAHLE Alternator 14 V, 150 A Case IH, Massey Ferguson, New Holland
38%
MAHLE
Alternator 14 V, 150 A Case IH, Massey Ferguson, New Holland
Direction of rotation: ↻ | Mounting hole Ø / R (mm): 10,2 / 90,0 | Nominal value...
€488,42 €403,65 €305,25 €252,27
 
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
5%
Feed pump 5 hole, hole spacing 25/37 and 45 mm, flange 52 mm
Version: 5 holes, Vertical hole spacing: 25/37 mm, Horizontal hole spacing: 45 m...
€42,99 €35,53 €40,80 €33,72
 
Cover fender
Cover fender
€18,15 €15,00
 
Spring right fender Fendt, Massey Ferguson
Spring right fender Fendt, Massey Ferguson
Version: Suitable for Fendt pivoting mudguards.
€36,40 €30,08
 
Showing 1 - 24 of 68

Massey Ferguson 4708 parts for the engine bay, cab and hitch

An alternator that has stopped charging, a horn that only clicks, a mirror knocked loose by a hedge. These are the jobs that usually bring a Massey Ferguson 4708 owner to this page. You will find more than 70 parts here that are matched to this tractor, from GRANIT as well as Walterscheid, MAHLE, Scharmüller and HELLA.

What is available for the 4708

  • Alternators, a horn, number plate lights and a potentiometer for the electrics.
  • Thermostats, O-rings for the feed pump and sealing rings for the injectors.
  • Air brake connector heads and a drawbar frame for towing.
  • Mirrors, fender springs and fender pivots, along with clutch thrust bearings.

A tip for air brake connector heads

Connector heads wear at the seal and the valve, and a leaking one empties the trailer reservoir over time. When you replace them, watch the colour. Red is the supply line and yellow is the brake control line. Mixing them up means the trailer will not brake properly. Check the hose behind the head too, as a new head on a cracked line solves nothing.

The same habit pays off with the thermostat. Order the seal with it, because an old gasket that has been compressed for years rarely seals again.

Before replacing the alternator, run a quick check. Measure the battery voltage with the engine off and again with it running. If the reading does not rise, the alternator is not charging. If it does, look at the battery, the cables and anything that draws current while parked. A slipping drive belt can mimic a failed alternator too, so check its tension before ordering.

Finding the right part for your MF 4708

Start with the type plate and confirm it reads 4708 rather than another model from the 4700 range. If you still have the worn part, look for the number stamped or printed on it. Compare that reference number with the details on the product and you can be confident the connections and mounting match. For fender springs and pivots, left and right are always seen from the driver's seat looking forward.

Other pages that are useful if you run more than one Massey Ferguson:

Keeping one page per machine means the parts for the 4708 stay together, and nothing meant for a different tractor ends up on the workshop bench.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart