Menu
EUR

Massey Ferguson 4708 tractor parts & technical data

Whether it is electrics, a trailer coupling or lighting you need for the Massey Ferguson 4708, this page lists more than 70 parts for the 4700 series tractor.

68 parts found for Massey Ferguson 4708
Show:
Main bearing standard Ø 85 mm
5%
Main bearing standard Ø 85 mm
€48,38 €39,98 €45,95 €37,98
 
GRANIT Water pump Massey Ferguson 4607-5713, Valtra-Valmet A 74 - A 134
5%
GRANIT
Water pump Massey Ferguson 4607-5713, Valtra-Valmet A 74 - A 134
€568,89 €470,16 €540,40 €446,61
 
Pivot fender left Massey Ferguson 5460-8732
5%
Pivot fender left Massey Ferguson 5460-8732
€440,08 €363,70 €418,00 €345,45
 
Seal kit Hürlimann, Deutz-Fahr, Steyr
5%
Seal kit Hürlimann, Deutz-Fahr, Steyr
Reference no.: 47436943.
€78,26 €64,68 €74,30 €61,41
 
Internal plate PTO clutch 3,6 mm, inner 8,8 mm, outer 135 mm
Internal plate PTO clutch 3,6 mm, inner 8,8 mm, outer 135 mm
Version: thickness = 3,6 mm inner = 8,8 mm outer = 135 mm
€24,80 €20,50
 
GRANIT Thrust bearing 65 x 100 x 11 mm Landini, Massey Ferguson
5%
GRANIT
Thrust bearing 65 x 100 x 11 mm Landini, Massey Ferguson
Dimensions (mm): 65 x 100 x 11
€44,89 €37,10 €42,60 €35,21
 
MAHLE Alternator 14 V, 175 A, flange 56 mm, Challenger, Massey Ferguson
38%
MAHLE
Alternator 14 V, 175 A, flange 56 mm, Challenger, Massey Ferguson
Flange size (mm): 56,0 | Installation angle (°): l 60 | Mounting L / d / R (mm):...
€471,95 €390,04 €294,95 €243,76
 
Walterscheid Top drawbar rail 311 mm, pin Ø 22 mm, coupling pin 38 mm
18%
Walterscheid
Top drawbar rail 311 mm, pin Ø 22 mm, coupling pin 38 mm
Rail width: 311 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 38 ...
€2.209,02 €1.825,64 €1.822,40 €1.506,12
 
Mirror unheated 263 x 160 mm, rod Ø 10 - 22 mm Massey Ferguson
10%
Mirror unheated 263 x 160 mm, rod Ø 10 - 22 mm Massey Ferguson
Tractor type: Massey Ferguson 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 43...
€50,72 €41,92 €45,85 €37,89
 
Mirror 260 x 180 mm, unheated, rod Ø 10 mm
10%
Mirror 260 x 180 mm, unheated, rod Ø 10 mm
Dimensions: 260 x 180 mm. Rod Ø: 10 mm.
€57,84 €47,80 €52,30 €43,22
 
GRANIT Crankshaft seal for Ø 65 x 90 x 10 mm Fendt, Massey Ferguson
5%
GRANIT
Crankshaft seal for Ø 65 x 90 x 10 mm Fendt, Massey Ferguson
Outer Ø: 90 mm. Width: 10 mm. Inner Ø: 65 mm.
€67,20 €55,54 €63,80 €52,73
 
Showing 49 - 68 of 68

Massey Ferguson 4708 parts for the engine bay, cab and hitch

An alternator that has stopped charging, a horn that only clicks, a mirror knocked loose by a hedge. These are the jobs that usually bring a Massey Ferguson 4708 owner to this page. You will find more than 70 parts here that are matched to this tractor, from GRANIT as well as Walterscheid, MAHLE, Scharmüller and HELLA.

What is available for the 4708

  • Alternators, a horn, number plate lights and a potentiometer for the electrics.
  • Thermostats, O-rings for the feed pump and sealing rings for the injectors.
  • Air brake connector heads and a drawbar frame for towing.
  • Mirrors, fender springs and fender pivots, along with clutch thrust bearings.

A tip for air brake connector heads

Connector heads wear at the seal and the valve, and a leaking one empties the trailer reservoir over time. When you replace them, watch the colour. Red is the supply line and yellow is the brake control line. Mixing them up means the trailer will not brake properly. Check the hose behind the head too, as a new head on a cracked line solves nothing.

The same habit pays off with the thermostat. Order the seal with it, because an old gasket that has been compressed for years rarely seals again.

Before replacing the alternator, run a quick check. Measure the battery voltage with the engine off and again with it running. If the reading does not rise, the alternator is not charging. If it does, look at the battery, the cables and anything that draws current while parked. A slipping drive belt can mimic a failed alternator too, so check its tension before ordering.

Finding the right part for your MF 4708

Start with the type plate and confirm it reads 4708 rather than another model from the 4700 range. If you still have the worn part, look for the number stamped or printed on it. Compare that reference number with the details on the product and you can be confident the connections and mounting match. For fender springs and pivots, left and right are always seen from the driver's seat looking forward.

Other pages that are useful if you run more than one Massey Ferguson:

Keeping one page per machine means the parts for the 4708 stay together, and nothing meant for a different tractor ends up on the workshop bench.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart