Menu
EUR

Massey Ferguson 5450 tractor parts & technical data

The 5400 series page for the Massey Ferguson 5450 runs to more than 190 parts. Electrics, trailer couplings and lighting are three of the groups you can browse.

195 parts found for Massey Ferguson 5450
Show:
GRANIT Rocker switch work light with illumination indicator
GRANIT
Version: With illumination indicator. More
Version: With illumination indicator.
€34,21 €28,27 €32,45 €26,82
You save 5%
Walterscheid Adapter plate 335 mm rail, guide 30 mm, hole pattern 160 x 100 mm
Walterscheid
Rail width (mm): 335 | Assembly notes: The vehicle part support distance (from the centre of the coupling plate to the centre of the coupling point) m... More
Rail width (mm): 335 | Assembly notes: The vehicle part support distan...
€897,82 €742,00 €740,70 €612,15
You save 18%
GRANIT Tank cap engine cooling
€44,24 €36,56 €42,00 €34,71
You save 5%
GRANIT Repair set polyurethane beglazingskit, Terostat primer - 310 ml
GRANIT
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - Wool wiper, - Application nozzle, - Cleaner, - Cleaning sponge, - Instructions (... More
Contents: - Polyurethane direct glazing sealant, - Terostat primer, - ...
€55,61 €45,96 €52,80 €43,64
You save 5%
Hydraulic top link cat. 2, 620 - 881 mm, stroke 261 mm, Ø 70 mm
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: 35 mm. Cylinder Ø inner E: 70 mm. Check valve: Top. Lifting force: 6 t. Tensile... More
A cat.: 2 / 25,4. B cat.: 2 / 25,4. F: 620 / 881 mm. Piston rod Ø D: ...
€585,16 €483,60 €555,90 €459,42
You save 5%
GRANIT Gas strut rear window 150 N, 585 mm, C 10 mm, D 10 mm
GRANIT
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear screen. Form: 6. More
Newtons: 150. A: 585 mm. B: 290 mm. C: 10 mm. D: 10 mm. To fit: rear s...
€38,15 €31,53
Mirror 263 x 160 mm, unheated, manual, rod-Ø 10 - 24 mm
Dimensions: 263 x 160 mm. Height: 263 mm. Width: 160 mm. Version: Left or right control. Installation location: Right/left. Notes: Manual operation. A... More
Dimensions: 263 x 160 mm. Height: 263 mm. Width: 160 mm. Version: Left...
€34,50 €28,51 €32,75 €27,07
You save 5%
Walterscheid Piton Fix rail width 330 mm, locking pin Ø 25 mm, 3000 kg, 89,3 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load capacity: 3000 kg. D-value: 89.3 kN. Colour: Black. Description: This product is a ... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Load cap...
€1.675,85 €1.385,00 €1.382,55 €1.142,60
You save 18%
Walterscheid Top drawbar Cramer rail 335 mm, pin Ø 22 mm, coupling pin 31 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.175,21 €971,25 €923,35 €763,10
You save 21%
Walterscheid Drawbar manual rail width 330 mm, coupling pin 31 mm, 92 kN
Walterscheid
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecting pin: 31 mm. Load capacity: 2000 kg. D-value: 92 kN. Colour: Black. Descriptio... More
Rail width: 330 mm. Detent pin Ø: 25 mm. Guide width: 32 mm. Connecti...
€1.058,75 €875,00 €873,45 €721,86
You save 18%
Walterscheid Top drawbar rail 335 mm, pin Ø 22 mm, coupling pin 37 mm
Walterscheid
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecting pin: 37 mm. Load capacity: 2000 kg. D-value: 120,5 kN. Colour: Black. Descrip... More
Rail width: 335 mm. Detent pin Ø: 22 mm. Guide width: 30 mm. Connecti...
€1.594,71 €1.317,94 €1.315,60 €1.087,27
You save 18%
HELLA Oil pressure switch engine open function (NO) 1/8 inch NPT, 0,4 - 0,6 bar
HELLA
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade terminal 6.3 mm, AF: 24 mm, Colour: black. Pressure range: 0,4 - 0,6 bar. Thread: ... More
Version: Thread: 1/8" NPT, Switching pressure: 0.4 - 0.6 bar, Blade te...
€10,75 €8,88
Rotary switch heating and air conditioning, 5 plug connections
Version: Without knob, 5 plug connections. More
Version: Without knob, 5 plug connections.
€65,45 €54,09
HELLA Number plate light R10W, 12/24 V, 102 x 55 x 57 mm - 2 pieces
HELLA
Version: For mounting above the number plate, or to the left and right of the number plate, test mark: E1 22819, plastic. Bulb: 12V10WK / R10W, 24V10W... More
Version: For mounting above the number plate, or to the left and right...
€35,80 €29,59
HELLA Relays changeover contact 12 V, 30 - 40 A, with holder, 5-pin, 6,3 mm
HELLA
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm, With resistor for suppressing inductive interference voltage peaks. Colour: Bla... More
Version: 12 V / 30 - 40 A, With bracket, 5-pin, blade terminal 6.3 mm,...
€21,85 €18,06
GRANIT Relays starter relay 12 V / 50 A, 4-pin, with holder, blade terminal
GRANIT
Version: 12 V / 50 A, With bracket, 4-pin, blade terminal 6.3 mm. More
Version: 12 V / 50 A, With bracket, 4-pin, blade terminal 6.3 mm.
€31,60 €26,12
GRANIT Sensor 1-pin, 1/8 inch NPT conical
GRANIT
Version: 1-pin. Thread: 1/8” NPT, tapered. More
Version: 1-pin. Thread: 1/8” NPT, tapered.
€10,95 €9,05
ROCKINGER Flange hitch automatic 48,7 mm, 160 x 100 mm, M21, 1000 kg, 190 kN
ROCKINGER
Version: Lever upwards More
Version: Lever upwards
€2.508,20 €2.072,89 €1.920,56 €1.587,24
You save 23%
Walterscheid Adapter plate rail width 330 mm, hole pattern 160 x 100 mm, M21
Walterscheid
Guide width (mm): 32 | Description: The coupling plate is a height-adjustable sliding plate that can only be operated in hitch supports with locking r... More
Guide width (mm): 32 | Description: The coupling plate is a height-adj...
€1.214,60 €1.003,80 €954,30 €788,68
You save 21%
Scharmüller Drawbar frame rail 330 mm, guide 32 mm, 112 kN, 1000 kg
Scharmüller
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour: Schwarz | Guide width (mm): 32 | D-value (kN): 112 | Dc-value (kN): 106 | V-val... More
Version: Lang | Rail width (mm): 330 | Category: Lagerböcke | Colour:...
€1.287,16 €1.063,77
FEBI Engine oil filter Ø 93 mm, height 177 mm, thread 3/4"-16 UNF
€19,80 €16,36 €12,18 €10,07
You save 38%
FEBI Engine oil filter Ø 93 mm, height 177 mm, thread 3/4"-16 UNF
€26,68 €22,05 €8,08 €6,68
You save 70%
GRANIT Repair set brake cylinder Massey Ferguson, Case IH
€36,41 €30,09 €34,55 €28,55
You save 5%
Showing 25 - 48 of 195

Clutch, drawbar and cab parts for the Massey Ferguson 5450

Pulling heavy trailers with a Massey Ferguson 5450 loads two places harder than the rest: the clutch pack and the drawbar. That is where this page begins. There are more than 190 parts here that fit this type, with brands such as Walterscheid, ROCKINGER, GRANIT, HELLA and Scharmüller.

Clutch plates

Internal plates and external plates for the clutch are both available. Before fitting new friction plates, soak them in the correct oil for a while so the lining is fully saturated. Plates assembled dry can slip or glaze in their first hours of work. Replace the pack as a set and inspect the steel plates for blue heat marks or distortion.

Drawbar and frame

At the rear there are drawbar balls and complete drawbar frames from Walterscheid and ROCKINGER among others. A worn ball shows itself as slack and knocking when you pull away or brake. Check the locking mechanism and keep the ball lightly greased. After fitting a new drawbar frame, go over the mounting bolts again after the first few days of work and bring them back to the specified torque, because the mating faces settle under load.

Cab, lights and air conditioning

For the cab you will find handles, knobs, mirrors and gas struts for the rear window, plus a sealing ring for the rear window lock. On the electrical side there are work lamps, rocker switches with an illumination indicator, push button switches and relays. An aircon compressor and a tank cap complete the list.

Before the compressor comes out, the refrigerant has to be recovered by someone with the proper equipment. It must not be vented, and a new compressor lasts longer when the system is evacuated and recharged properly afterwards.

Confirming your 5450 and choosing the part

Read the type from the rating plate and keep the reference number of the old part to hand. With clutch plates, note the number and order of plates in the pack, and with a drawbar, the rail width.

Massey Ferguson placed the 5450 in its 5400 family alongside several sister models. These types from that series also have their own page: 5425, 5435, 5445, 5455, 5460 and 5465. The 5430 and the 5470 are in the series too. Do not assume parts are shared between these types, but order for the tractor in your yard. The rest of the make is on the Massey Ferguson parts page.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart