Menu
EUR

Massey Ferguson 6614 tractor parts & technical data

Looking for a trailer coupling, electrics or lighting for the Massey Ferguson 6614? You will find more than 250 parts here that fit this 6600 series model.

294 parts found for Massey Ferguson 6614
Show:
Pivot fender left Massey Ferguson 5460-8732
€440,08 €363,70 €418,00 €345,45
You save 5%
Scharmüller Drawbar K80 rail 320 mm, pin Ø 30 mm, 3000 kg, black
Scharmüller
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Load capacity: 3000 kg. D-value: 89,3 kN. Plate height: 190 mm. Colour: Black. Overhang:... More
Rail width: 320 mm. Detent pin Ø: 30 mm. Guide width: 20 mm. Load cap...
€1.392,54 €1.150,86 €1.172,90 €969,34
You save 16%
Scharmüller Forced steering inner part left Ball 80 to K50 250 mm, 2 ton
Scharmüller
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Description: Approved for steering forces up to 20 kN (2 t). Load capacity: 2 t. Load c... More
Assembly notes: Anticlockwise. Steering power: 2 t. Lock: K50. Descrip...
€472,38 €390,40 €417,75 €345,25
You save 12%
Oil pressure switch transmission 1,3 bar, lagedrukschakelaar
Version: 1.3 bar, low pressure switch. More
Version: 1.3 bar, low pressure switch.
€120,88 €99,90 €114,80 €94,88
You save 5%
GRANIT Push button switch hydraulics lift, outer shifting on fender
GRANIT
Version: Raise control hydraulics, External switch on mudguard. More
Version: Raise control hydraulics, External switch on mudguard.
€33,99 €28,09 €32,25 €26,65
You save 5%
GRANIT Micro relays changeover contact 12 V / 15 - 25 A, 5-pin, without bracket
GRANIT
Version: 12 V / 15 - 25 A, Without bracket, 5-pin, blade terminal. More
Version: 12 V / 15 - 25 A, Without bracket, 5-pin, blade terminal.
€7,40 €6,12
GRANIT Speed sensor speed 107 mm, hydraulic pump cover
GRANIT
Version: Speed, length: 107 mm, For hydraulic pump cover central housing. More
Version: Speed, length: 107 mm, For hydraulic pump cover central housi...
€62,32 €51,50 €59,15 €48,88
You save 5%
GRANIT Internal plate 4-wheel drive 1,7 mm, inner 66 mm, outer 14 mm
GRANIT
Version: thickness = 1,7 mm inner = 66 mm outer = 14 mm More
Version: thickness = 1,7 mm inner = 66 mm outer = 14 mm
€43,69 €36,11 €41,50 €34,30
You save 5%
GRANIT External plate PTO clutch 2,5 mm, inner 95,7 mm, outer 165 mm
GRANIT
Version: thickness = 2,5 mm inner = 95,7 mm outer = 165 mm More
Version: thickness = 2,5 mm inner = 95,7 mm outer = 165 mm
€36,06 €29,80 €34,25 €28,31
You save 5%
Internal plate PTO clutch 3,6 mm, inner 8,8 mm, outer 135 mm
Version: thickness = 3,6 mm inner = 8,8 mm outer = 135 mm More
Version: thickness = 3,6 mm inner = 8,8 mm outer = 135 mm
€24,80 €20,50
GRANIT Internal plate differential catch 2,5 mm, inner 148,8 mm
GRANIT
Version: thickness = 2,5 mm inner = 148,8 mm outer = 211 mm More
Version: thickness = 2,5 mm inner = 148,8 mm outer = 211 mm
€42,10 €34,79 €39,95 €33,02
You save 5%
AKS-Dasis Thermostat airco Challenger, Massey Ferguson
€102,51 €84,72 €97,35 €80,45
You save 5%
Scharmüller Forced steering 250 mm, K50, left, 2 ton, black, 4,86 kg
Scharmüller
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: Anticlockwise | Description: Approved for steering forces up to 20 kN (2 t) | Conn... More
Steering power (t): 2 | Colour: Black | Lock: K50 | Assembly notes: An...
€472,38 €390,40 €417,75 €345,25
You save 12%
Brake mechanism hand brake with 3 tension springs Massey Ferguson 3050-6480
Gearshift cable PTO engagement 2520 mm, M6 Massey Ferguson
Cable length: 2520 mm. Sleeve length: 2310 mm. Thread: M6. More
Cable length: 2520 mm. Sleeve length: 2310 mm. Thread: M6.
€158,43 €130,93 €150,50 €124,38
You save 5%
PTO shaft end piece 1 3/8 inch, 21 splines Fendt, Valtra-Valmet
Version: 1 3/8", 21 splines. More
Version: 1 3/8", 21 splines.
€343,36 €283,77 €326,15 €269,55
You save 5%
MAHLE Fan clutch Ø 198 mm Massey Ferguson 6485-7499
€1.062,76 €878,31 €664,20 €548,93
You save 38%
Signal transmitter exhaust aftertreatment Massey Ferguson 5600-7700
€487,56 €402,94 €463,15 €382,77
You save 5%
GRANIT Air hose to the intercooler Massey Ferguson 6612-6616
€167,96 €138,81 €159,55 €131,86
You save 5%
Showing 217 - 240 of 294

Massey Ferguson 6614 parts for hitching and towing

A 6614 is often hooked up to a heavy trailer, a force-steered dolly or an implement on the three-point linkage. This page lists more than 250 replacement parts for the model, and a good share of them deal with hitching: drawbars, drawbar frames, adapter plates, ball hitches, forced steering and hydraulic top links. Makers include GRANIT, Scharmüller, Walterscheid, DANA Spicer and ROCKINGER.

Drawbar frame, adapter plate and ball hitch

With a rail system on the rear of the tractor, the drawbar, ball hitch or a Piton hook slides into the rail of the drawbar frame. An adapter plate lets a different coupling fit the same bolt pattern. A tip for the ball hitch: keep the ball lightly greased and check the socket on the drawbar eye for wear. A dry ball soon wears oval, and the trailer starts to knock when you brake and pull away. On the forced steering, check the locking mechanism as well. Play there shows up as a trailer that wanders behind the tractor.

Top link, four-wheel drive clutch and sensors

A hydraulic top link lets you set the pitch of an implement without leaving the seat. When fitting it, make sure the hoses have enough slack with the linkage fully raised and fully lowered, or they will rub through on the frame. For the front axle drive there are external and internal plates for the four-wheel drive clutch, together with adjusting plates and O-rings used when setting it up. Keep the old adjusting plates when you strip it down and write down their thickness. That gives you a starting point for the new adjustment.

There are also temperature sensors, other sensors for the electronics, work lamps, control knobs for the cab and seals, for instance for the door handle.

Finding the right part for your 6614

The type plate tells you exactly which model you have, and the numbers within the 6600 series sit close together. For hitch parts, also measure the rail width and the locking pin on the tractor itself. For plates, sensors and seals, compare the reference number on the old part with the number shown with the product on this page.

The other models in the 6600 series each have their own page:

That way everything that fits one tractor stays together. Own another Massey Ferguson as well? Browse Massey Ferguson parts.

Brands
  • View more
Price
Min Max
Close
Choose your language
Choose your currency
€

Recently added

Total incl. tax
€0,00
0
Compare
Start comparison

This product has been added to your cart